Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 17:11:41
From: eric
Description: NetBSD/8.0_STABLE/amd64/x86_64 on LENOVO ThinkCentre M82
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_STABLE (GENERIC) #3: Thu Aug 16 22:38:01 CDT 2018
eric@bob-the-builder:/work/eric/NetBSD-8/obj/amd64/sys/arch/amd64/compile/GENERIC
total memory = 16172 MB
avail memory = 15680 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 2929AZ6 (ThinkCentre M82)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000D4628088 00008C (v01 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: FACP 0x00000000D463A640 00010C (v05 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: DSDT 0x00000000D46281A0 01249E (v02 LENOVO TC-9S 00001620 INTL 20051117)
ACPI: FACS 0x00000000D65F7080 000040
ACPI: APIC 0x00000000D463A750 000072 (v03 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: FPDT 0x00000000D463A7C8 000044 (v01 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: MCFG 0x00000000D463A810 00003C (v01 LENOVO TC-9S 00001620 MSFT 00000097)
ACPI: SLIC 0x00000000D463A850 000176 (v01 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: HPET 0x00000000D463A9C8 000038 (v01 LENOVO TC-9S 00001620 AMI. 00000005)
ACPI: SSDT 0x00000000D463AA00 00036D (v01 LENOVO TC-9S 00001620 INTL 20091112)
ACPI: SSDT 0x00000000D463AD70 0009AA (v01 LENOVO TC-9S 00001620 INTL 20051117)
ACPI: SSDT 0x00000000D463B720 000B22 (v01 LENOVO TC-9S 00001620 INTL 20051117)
ACPI: DMAR 0x00000000D463C248 0000B8 (v01 LENOVO TC-9S 00001620 INTL 00000001)
ACPI: ASF! 0x00000000D463C300 0000A5 (v32 LENOVO TC-9S 00001620 TFSM 000F4240)
ACPI: BGRT 0x00000000D463C3A8 000038 (v00 LENOVO TC-9S 00001620 AMI 00010013)
ACPI: TCPA 0x00000000D463C3E0 000032 (v02 LENOVO TC-9S 00001620 MSFT 01000013)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, id 0x306a9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, id 0x306a9
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, id 0x306a9
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <LENOVO,TC-9S ,00001620>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CDDE008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CD88408 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811CCA3208 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
TPM (PNP0C31) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout2: brightness levels: [0-100]
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout3: brightness levels: [0-100]
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout4: brightness levels: [0-100]
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout5: brightness levels: [0-100]
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout6: brightness levels: [0-100]
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout7: brightness levels: [0-100]
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 85.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 106.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 106.0 C, passive 106.0 C, passive cooling
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
LBAI (LBA0001) at acpi0 not configured
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0150 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0152 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800139ecd000, size 1680x1050, depth 32, stride 6720
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0662
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xa4)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e48 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e02 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: WEC WPCT200 rev 0x47
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: C3: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 77000 mW, 3201 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 3200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 73079 mW, 3100 MHz
acpicpu0: P3: FFH, lat 10 us, pow 69986 mW, 3000 MHz
acpicpu0: P4: FFH, lat 10 us, pow 66950 mW, 2900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 61045 mW, 2700 MHz
acpicpu0: P6: FFH, lat 10 us, pow 58188 mW, 2600 MHz
acpicpu0: P7: FFH, lat 10 us, pow 55374 mW, 2500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 52614 mW, 2400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 49215 mW, 2300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 46570 mW, 2200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 43989 mW, 2100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 38963 mW, 1900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 36528 mW, 1800 MHz
acpicpu0: P14: FFH, lat 10 us, pow 34144 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 31811 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3192999240 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
uhub4 at uhub1 port 2: vendor 0557 (0x557) product 7000 (0x7000), class 9/0, rev 1.10/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <Hitachi HDS723020BLA642>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <PLDS DVD-RW DH16ACSH, S0A68694ZVJ6YD00RH1X, JL3B> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub6 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub6: single transaction translator
uhub5: 8 ports with 8 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Chicony (0x472) PFU-65 USB Keyboard (0x65), rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 4 configuration 1 interface 0
uhidev1: KYE (0x458) OpticaM-bM^AM-, Mouse (0x24), rev 1.10/1.01, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub1 port 3 configuration 1 interface 0
umass0: HLDS Inc. (0x152e) Super Multi Rewriter (0x2507), rev 2.00/0.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
cd1 at scsibus0 target 0 lun 0: <HL-DT-ST, DVD-RAM GSA-E60N, 1.00> cdrom removable
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 8 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)