Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-07 18:35:41
From: truckman
Description: FreeBSD/AMD Athlon(tm) II X3
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #16 r339017M: Sat Sep 29 19:18:41 PDT 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERICDDB amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) II X3 450 Processor (3214.59-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f53  Family=0x10  Model=0x5  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant
real memory  = 34359738368 (32768 MB)
avail memory = 33275473920 (31733 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 1 package(s) x 3 core(s)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1607294753 Hz quality 800
random: entropy device external interface
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80fea9c0, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <GBT GBTUACPI> on motherboard
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKA (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKB (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKC (20171214/dspkginit-517)
ACPI Error: Could not find/resolve named package element: LNKD (20171214/dspkginit-517)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfb000000-0xfbffffff,0xc0000000-0xcfffffff,0xde000000-0xdfffffff irq 18 at device 0.0 on pci1
nvidia0: <GeForce 210> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfcffc000-0xfcffffff irq 18 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
usbus3 on ohci2
usbus3: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
usbus4 on ohci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <serial bus, FireWire> at device 14.0 (no driver attached)
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
usbus6: 12Mbps Full Speed USB v1.0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 and 31 on hdaa4
pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen6.1: <ATI OHCI root HUB> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen4.1: <ATI OHCI root HUB> at usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10EADS-00L5B1 01.01A01> ATA8-ACS SATA 2.x device
ada0: Serial Number xxxxxxxx
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: 300.000MB/s transferscd0:  (SATA 2.x, UDMA6, PIO 8192bytes<Optiarc DVD RW AD-7261S 1.03> Removable CD-ROM SCSI device
)
ada0: Command Queueing enabled
cd0: 150.000MB/s transfersada0: 953869MB (1953525168 512 byte sectors)
 (SATA 1.x, UDMA5, ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ATAPI 12bytes, ada1: PIO 8192bytes<Hitachi HDS5C3020ALA632 ML6OA580> ATA8-ACS SATA 3.x device
)ada1: Serial Number xxxxxxxx

ada1: 300.000MB/s transferscd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
 (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HDS5C3020ALA632 ML6OA580> ATA8-ACS SATA 3.x device
ada2: Serial Number xxxxxxxx
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device
ada3: Serial Number xxxxxxxx
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors)
ada3: quirks=0x1<4K>
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:mousie/ROOT/default []...
GEOM_MIRROR: Device mirror/swap launched (4/4).
Root mount waiting for: usbus5 usbus2
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen2.2: <vendor 0x05e3 USB2.0 Hub> at usbus2
uhub7 on uhub5
uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus2
Root mount waiting for: usbus2
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen2.3: <Logitech USB Receiver> at usbus2
Root mount waiting for: usbus2
usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
ugen2.4: <vendor 0x05e3 USB2.0 Hub> at usbus2
uhub8 on uhub5
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> on usbus2
Root mount waiting for: usbus2
uhub8: 4 ports with 4 removable, self powered
ugen2.5: <EPSON USB2.0 Printer Hi-speed> at usbus2
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
random: unblocking device.
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub7
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/22.01, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid0 on uhub7
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/22.01, addr 3> on usbus2
ulpt0 on uhub8
ulpt0: <EPSON USB2.0 Printer Hi-speed, class 0/0, rev 2.00/1.00, addr 5> on usbus2
ulpt0: using bi-directional mode
re0: link state changed to UP