Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-07 18:50:47
From: truckman
Description: FreeBSD/Thinkpad R40
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #21 r336040M: Fri Jul 20 23:55:50 PDT 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/UP_SMALL i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) M processor 1500MHz (1498.76-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x695 Family=0x6 Model=0x9 Stepping=5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1073741824 (1024 MB)
avail memory = 1035112448 (987 MB)
Timecounter "TSC" frequency 1498756391 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0add340, 0) error 19
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)
Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20171214/tbfadt-796)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <IBM TP-1P> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
vgapci0: Boot video device
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 6 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 9 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1510 PCI-CardBus Bridge> irq 6 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ath0: <Atheros 5212> mem 0xc0200000-0xc020ffff irq 9 at device 2.0 on pci2
ath0: AR5212 mac 5.9 RF2112 phy 4.3
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0046
pci2: <serial bus, FireWire> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 10 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HM160HC LQ100-10> ATA8-ACS device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors)
Trying to mount root from ufs:/dev/label/hairball.elia []...
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4240N 0211> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
pccard0: Allocation failed for cfe 32
pccard0: Allocation failed for cfe 33
pccard0: Allocation failed for cfe 34
pccard0: Allocation failed for cfe 35
uart2: <INTEL CORP V92 MODEM AT-MD56XX> at port 0x4000-0x4007 irq 6 function 0 config 36 on pccard0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Enter passphrase for label/hairball: uhub3: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x04b3 product 0x4482> at usbus3
uhub4 on uhub3
uhub4: <vendor 0x04b3 product 0x4482, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: MTT enabled
uhub4: 4 ports with 4 removable, self powered
ugen3.3: <vendor 0x0b95 product 0x7720> at usbus3
axe0 on uhub4
axe0: <vendor 0x0b95 product 0x7720, rev 2.00/0.01, addr 3> on usbus3
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
GEOM_ELI: Device label/hairball.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
random: unblocking device.
lo0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP