Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-07 19:24:12
From: randy
Description: psg
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: AMD Opteron(tm) Processor 6344                  (2600.05-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x600f20  Family=0x15  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Structured Extended Features=0x8<BMI1>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16575729664 (15807 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <112513 APIC1100>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 12 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1300025586 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd800-0xd81f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 48 at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib2: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe800-0xe81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci2
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfebfbc00-0xfebfbfff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf9000-0xfebf9fff irq 16 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebfa000-0xfebfafff irq 16 at device 18.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfebfb800-0xfebfb8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf7000-0xfebf7fff irq 18 at device 19.0 on pci0
usbus3 on ohci2
usbus3: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf8000-0xfebf8fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfebfb400-0xfebfb4ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfdffc000-0xfdffffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci3
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf6000-0xfebf6fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
usbus6: 12Mbps Full Speed USB v1.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 2.50, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen0.1: <ATI OHCI root HUB> at usbus0
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen6.1: <ATI OHCI root HUB> at usbus6
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub3: 2 ports with 2 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2000F9YZ-09N20L0 01.01A01> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD2005FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus5 usbus2
uhub0: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5 usbus2random: unblocking device.

uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
ugen5.2: <vendor 0x05e3 USB Storage> at usbus5
umass0 on uhub0
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.16, addr 2> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:7:0: Attached to scbus7
Root mount waiting for: usbus5
ugen3.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus3
ukbd0 on uhub2
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus3
kbd2 at ukbd0
ums0 on uhub2
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
em0: link state changed to UP