Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-07 22:04:44
From: bu7cher
Description: FreeBSD on ASUS Z170M-PLUS
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA7 r338849 amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-6600 CPU @ 3.30GHz (3312.11-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16524754944 (15759 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
arc4random: no preloaded entropy cache
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 3 1 2
Timecounter "TSC-low" frequency 1656055553 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e1920, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7230000-0xf723ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7248000-0xf7249fff,0xf724c000-0xf724c0ff,0xf724b000-0xf724b7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xf7100000-0xf7103fff irq 16 at device 0.0 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac1: <Intel Sunrise Point HDA Controller> mem 0xf7240000-0xf7243fff,0xf7220000-0xf722ffff irq 16 at device 31.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection> mem 0xf7200000-0xf721ffff irq 16 at device 31.6 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: Unable to map MSIX table
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <Samsung SSD 960 EVO 250GB> NVMe namespace
nvd0: 238475MB (488397168 512 byte sectors)
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <ADATA SP900 5.8.2> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
ada1: <ST31000528AS CC38> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDRH10N 0B10> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 10MB (5401 2048 byte sectors)
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub MTT> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: MTT enabled
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <SIGMACHIP USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <A4Tech USB Full Speed> at usbus0
ukbd1 on uhub0
ukbd1: <A4Tech USB Full Speed, class 0/0, rev 1.10/6.06, addr 3> on usbus0
kbd3 at ukbd1
ugen0.5: <Kingston DataTraveler 3.0> at usbus0
umass0 on uhub0
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.00, addr 4> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc101
umass0:7:0: Attached to scbus7
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 29605MB (60632064 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
random: unblocking device.
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
lo0: link state changed to UP
Link state changed to up
em0: link state changed to UP
uhid0 on uhub1
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
ums0 on uhub0
ums0: <A4Tech USB Full Speed, class 0/0, rev 1.10/6.06, addr 3> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0