Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-08 04:19:05
From: hsw
Description: FreeBSD/amd64 on Gigabyte Technology Co., Ltd. X58A-UD3R
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz (3331.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 12884901888 (12288 MB)
avail memory = 12423454720 (11847 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1665518654 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ahci0: <Marvell 88SE9128 AHCI SATA controller> port 0xaf00-0xaf07,0xae00-0xae03,0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfb9ff000-0xfb9ff7ff irq 16 at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x900<NOBSYRES,ALTSIG>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci2: <PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfbafe000-0xfbafffff irq 16 at device 0.0 on pci2
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xbf00-0xbf7f mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff,0xf6000000-0xf7ffffff irq 16 at device 0.0 on pci3
vgapci0: Boot video device
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
device_attach: ioapic0 attach returned 6
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801JI HDA Controller> mem 0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib5: [GIANT-LOCKED]
pci4: <ACPI PCI bus> on pcib5
ahci1: <JMicron JMB363 AHCI SATA controller> mem 0xfbefe000-0xfbefffff irq 17 at device 0.0 on pci4
ahci1: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahci1: quirks=0x1<NOFORCE>
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
atapci0: <JMicron JMB363 UDMA133 controller> port 0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f irq 18 at device 0.1 on pci4
ata2: <ATA channel> at channel 0 on atapci0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib6: [GIANT-LOCKED]
pci5: <ACPI PCI bus> on pcib6
atapci1: <JMicron JMB363 UDMA133 controller> port 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem 0xfbdfe000-0xfbdfffff irq 19 at device 0.0 on pci5
ahci2: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci1
ahci2: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahci2: quirks=0x1<NOFORCE>
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich11: <AHCI channel> at channel 1 on ahci2
ata3: <ATA channel> at channel 0 on atapci1
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib7: [GIANT-LOCKED]
pci6: <ACPI PCI bus> on pcib7
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfbbff000-0xfbbfffff,0xfbbf8000-0xfbbfbfff irq 16 at device 0.0 on pci6
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
usbus5 on uhci3
usbus5: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
usbus6 on uhci4
usbus6: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
usbus7 on uhci5
usbus7: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci1
usbus8: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH10 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f,0xf800-0xf80f at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci2
ata1: <ATA channel> at channel 1 on atapci2
atapci3: <Intel ICH10 SATA300 controller> port 0xf600-0xf607,0xf500-0xf503,0xf400-0xf407,0xf300-0xf303,0xf200-0xf20f,0xf100-0xf10f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci3
ata5: <ATA channel> at channel 1 on atapci3
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd2fff,0xd3000-0xd5fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC889 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC889 (Rear Digital)> at nid 30 and 31 on hdaa0
pcm3: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa0
ugen8.1: <Intel EHCI root HUB> at usbus8
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen7.1: <Intel UHCI root HUB> at usbus7
ugen0.1: <0x1033 XHCI root HUB> at usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub8: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub6: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub8: 2 ports with 2 removable, self powered
uhub0: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ada0 at ata0 bus 0 scbus14 target 0 lun 0
ada0: <ST1000DM003-9YN162 CC4H> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ata0 bus 0 scbus14 target 1 lun 0
ada1: <ST1000DM003-9YN162 CC4H> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ata1 bus 0 scbus15 target 1 lun 0
ada2: <ST1000DM003-9YN162 CC4H> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 953869MB (1953525168 512 byte sectors)
ada2: quirks=0x1<4K>
pass0 at ahcich7 bus 0 scbus7 target 0 lun 0
pass0: <Marvell 91xx Config 1.01> Removable Processor SCSI device
pass0: [_SERIAL_NUMBER_XXXXXXXXX]
pass0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
Trying to mount root from zfs:zroot/ROOT/default []...
random: unblocking device.
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: link state changed to DOWN
re0: link state changed to UP
re0: promiscuous mode enabled
bridge0: link state changed to UP
tap0: promiscuous mode enabled
re0: link state changed to DOWN
bridge0: link state changed to DOWN
re0: link state changed to UP
bridge0: link state changed to UP