Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-08 05:04:45
From: Rin
Description: dmesg for system kept on current release (will be upgraded to 12/13)
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU          420  @ 1.60GHz (1600.09-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x10661  Family=0x6  Model=0x16  Stepping=1
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8190263296 (7810 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <INTEL  DG33FB  >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Timecounter "TSC" frequency 1600092352 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DG33FB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5430-0x5437 mem 0xe8500000-0xe857ffff,0xe0000000-0xe7ffffff,0xe8400000-0xe84fffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 7164k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x5400-0x541f mem 0xe8580000-0xe859ffff,0xe85a0000-0xe85a0fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x50e0-0x50ff irq 18 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe85a1c00-0xe85a1fff irq 17 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0x4018-0x401f,0x4024-0x4027,0x4010-0x4017,0x4020-0x4023,0x4000-0x400f mem 0xe8300000-0xe83001ff irq 17 at device 0.0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib4: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib4
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem 0xe8280000-0xe829ffff,0xe8200000-0xe827ffff,0xe82a0000-0xe82a3fff irq 19 at device 0.0 on pci2
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: xx:xx:xx:xx:xx:xx
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib5: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib5
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2000-0x201f mem 0xe8180000-0xe819ffff,0xe8100000-0xe817ffff,0xe81a0000-0xe81a3fff irq 16 at device 0.0 on pci3
em2: Using MSIX interrupts with 3 vectors
em2: Ethernet address: xx:xx:xx:xx:xx:xx
em2: netmap queues/slots: TX 1/1024, RX 1/1024
uhci3: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe85a1800-0xe85a1bff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib6
puc0: <NetMos NM9845 Quad UART and 1284 Printer port> port 0x1030-0x1037,0x1028-0x102f,0x1020-0x1027,0x1018-0x101f,0x1010-0x1017,0x1000-0x100f irq 18 at device 2.0 on pci4
uart2: <Non-standard ns8250 class UART with FIFOs> at port 1 on puc0
uart3: <Non-standard ns8250 class UART with FIFOs> at port 2 on puc0
uart4: <16550 or compatible> at port 3 on puc0
uart5: <16550 or compatible> at port 4 on puc0
ppc1: <Parallel port> at port 5 on puc0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x5428-0x542f,0x543c-0x543f,0x5420-0x5427,0x5438-0x543b,0x5020-0x503f mem 0xe85a1000-0xe85a17ff irq 21 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xcd800-0xce7ff,0xce800-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
uhub2: 2 ports with 2 removable, self powered
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST3500418AS CC38> ATA8-ACS SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
uhub4: 2 ports with 2 removable, self powered
ada0: 476940MB (976773168 512 byte sectors)
uhub5: 2 ports with 2 removable, self powered
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <ST3500418AS CC38> ATA8-ACS SATA 2.x device
ada1: Serial Number xxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
uhub6: 2 ports with 2 removable, self powered
ada1: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:z0/osroot []...
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x05e3 USB2.0 Hub> at usbus3
uhub8 on uhub3
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus3
Root mount waiting for: usbus3
uhub8: 4 ports with 4 removable, self powered
Root mount waiting for: usbus3
ugen3.3: <Dell Dell USB Keyboard> at usbus3
ukbd0 on uhub8
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 3> on usbus3
kbd2 at ukbd0
ugen3.4: <DELL DELL USB Laser Mouse> at usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen1.2: <American Power Conversion Smart-UPS 1500 FWUPS 06.5  ID18> at usbus1
ugen3.5: <JMicron JM20336 SATA, USB Combo> at usbus3
umass0 on uhub3
umass0: <Bulk-In, Bulk-Out Interface> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <ST375033 0AS > Fixed Direct Access SCSI-2 device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
random: unblocking device.
em0: changing name to 'lan'
em1: changing name to 'ext'
em2: changing name to 'wlan'
ext: link state changed to UP
ums0 on uhub8
ums0: <DELL DELL USB Laser Mouse, class 0/0, rev 2.00/57.00, addr 4> on usbus3
ums0: 8 buttons and [XYZT] coordinates ID=0
lan: link state changed to UP
uhid0 on uhub1
uhid0: <American Power Conversion Smart-UPS 1500 FWUPS 06.5  ID18, class 0/0, rev 2.00/1.06, addr 2> on usbus1
wlan: link state changed to UP