Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-08 07:06:08
From: arved
Description: FreeBSD/amd64 on Intel Corporation DP55WB
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (2666.82-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106e5  Family=0x6  Model=0x1e  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4077252608 (3888 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <INTEL  WBIBX10J>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1333409022 Hz quality 1000
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL WBIBX10J> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce 9600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3040-0x305f mem 0xf3100000-0xf311ffff,0xf3124000-0xf3124fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf3125c00-0xf3125fff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Ibex Peak HDA Controller> mem 0xf3120000-0xf3123fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf3125800-0xf3125bff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib3
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1000-0x107f mem 0xf3004800-0xf300487f irq 22 at device 1.0 on pci2
miibus0: <MII bus> on xl0
bmtphy0: <Broadcom 3c905B internal PHY> PHY 24 on miibus0
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
pci2: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Ibex Peak AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0xf3125000-0xf31257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 26,27 on hdaa0
pcm1: <Realtek ALC888 (Front Analog)> at nid 21 and 24 on hdaa0
pcm2: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3320418AS CC49> ATA8-ACS SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device
ada1: Serial Number xxxxxxxx
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: 114473MB (234441648 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from ufs:/dev/ada0p2 [rw]...
random: unblocking device.
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0020> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0020> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Creative Technology Ltd. Creative WebCam Vista> at usbus1
ugen1.4: <Generic Mass Storage Device> at usbus1
umass0 on uhub3
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen1.5: <GenesysLogic USB2.0 Hub> at usbus1
uhub4 on uhub3
uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.00/92.24, addr 5> on usbus1
uhub4: MTT enabled
uhub4: 4 ports with 0 removable, self powered
ugen1.6: <GenesysLogic USB2.0 Hub> at usbus1
uhub5 on uhub4
uhub5: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.00/92.23, addr 6> on usbus1
uhub5: MTT enabled
uhub5: 4 ports with 4 removable, self powered
xl0: link state changed to DOWN
uhub_reattach_port: giving up port reset - device vanished
em0: link state changed to UP
ugen1.7: <Gemplus USB SmartCard Reader> at usbus1
ugen1.8: <Microsoft Natural Ergonomic Keyboard 4000> at usbus1
ukbd0 on uhub5
ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 8> on usbus1
kbd1 at ukbd0
ugen1.9: <Logitech USB Laser Mouse> at usbus1
ukbd0: at uhub5, port 3, addr 8 (disconnected)
ukbd0: detached
kbd1 at vkbd0
kbd2 at vkbd1
uhid0 on uhub5
uhid0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 8> on usbus1
ums0 on uhub5
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/56.01, addr 9> on usbus1
ums0: 8 buttons and [XYZT] coordinates ID=0
ums0: at uhub5, port 4, addr 9 (disconnected)
ums0: detached
CPU: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (2666.82-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106e5  Family=0x6  Model=0x1e  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
  TSC: P-state invariant, performance statistics