NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

---

Date: 2018-10-08 09:37:26
From: tdb
Description: FreeBSD/i386 on Soekris net5501

Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #0 r330608: Wed Mar  7 23:31:51 GMT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/obj/nanobsd/i386.i386/u1/nanobsd/src.11/sys/PATHFINDER i386
FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
VT(vga): resolution 640x480
CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU)
  Origin="AuthenticAMD"  Id=0x5a2  Family=0x5  Model=0xa  Stepping=2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
real memory  = 536870912 (512 MB)
avail memory = 494268416 (471 MB)
Timecounter "TSC" frequency 499912015 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
module_register_init: MOD_LOAD (vesa, 0xc101ce50, 0) error 19
Firmware Error (ACPI): A valid RSDP was not found (20171214/tbxfroot-369)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
Geode LX: Soekris net5501 comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0004000-0xa00040ff irq 11 at device 6.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: Ethernet address: [_MAC_XXXXXXXXXX]
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0004100-0xa00041ff irq 5 at device 7.0 on pci0
vr1: Quirks: 0x2
vr1: Revision: 0x96
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: Ethernet address: [_MAC_XXXXXXXXXX]
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0004200-0xa00042ff irq 9 at device 8.0 on pci0
vr2: Quirks: 0x2
vr2: Revision: 0x96
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr2: Ethernet address: [_MAC_XXXXXXXXXX]
vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0
vr3: Quirks: 0x2
vr3: Revision: 0x96
miibus3: <MII bus> on vr3
ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr3: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0
usbus0 on ohci0
ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xa0006000-0xa0006fff irq 15 at device 21.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <AMD OHCI root HUB> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SDCFX3-004G HDX 4.32> CFA-4 device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 66.700MB/s transfers (UDMA4, PIO 2048bytes)
ada0: 3919MB (8027712 512 byte sectors)
uhub0: 4 ports with 4 removable, self powered
stray irq7
Trying to mount root from ufs:/dev/ada0s1a [ro]...
random: unblocking device.
uhub1: 4 ports with 4 removable, self powered
ugen1.2: <Integral Courier> at usbus1
umass0 on uhub1
umass0: <Integral Courier, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Integral Courier PMAP> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 1912MB (3915776 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
vr0: link state changed to DOWN
vr1: link state changed to DOWN
vr2: link state changed to DOWN
vr0: link state changed to UP
vr1: link state changed to UP
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ng0: changing name to 'tun0'
pflog0: promiscuous mode enabled
tun1: link state changed to UP
cannot forward src fe80:2::a677:33ff:fe6f:6840, dst 2001:4860:4860::6464, nxt 17, rcvif vr1, outif tun0
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
tun1: link state changed to DOWN
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1

Syncing disks, vnodes remaining... 1 1 0 done
All buffers synced.
Uptime: 23m57s
umass0: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0 r336457: Wed Jul 18 18:42:18 BST 2018
    tdb@nanobsd:/usr/obj/nanobsd/i386.i386/usr/src.11/sys/PATHFINDER i386
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU)
  Origin="AuthenticAMD"  Id=0x5a2  Family=0x5  Model=0xa  Stepping=2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
real memory  = 536870912 (512 MB)
avail memory = 494268416 (471 MB)
Timecounter "TSC" frequency 499911940 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
module_register_init: MOD_LOAD (vesa, 0xc101dea0, 0) error 19
Firmware Error (ACPI): A valid RSDP was not found (20171214/tbxfroot-369)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
Geode LX: Soekris net5501 comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0004000-0xa00040ff irq 11 at device 6.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: Ethernet address: [_MAC_XXXXXXXXXX]
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0004100-0xa00041ff irq 5 at device 7.0 on pci0
vr1: Quirks: 0x2
vr1: Revision: 0x96
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: Ethernet address: [_MAC_XXXXXXXXXX]
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0004200-0xa00042ff irq 9 at device 8.0 on pci0
vr2: Quirks: 0x2
vr2: Revision: 0x96
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr2: Ethernet address: [_MAC_XXXXXXXXXX]
vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0
vr3: Quirks: 0x2
vr3: Revision: 0x96
miibus3: <MII bus> on vr3
ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr3: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0
usbus0 on ohci0
ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xa0006000-0xa0006fff irq 15 at device 21.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <AMD OHCI root HUB> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SDCFX3-004G HDX 4.32> CFA-4 device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 66.700MB/s transfers (UDMA4, PIO 2048bytes)
ada0: 3919MB (8027712 512 byte sectors)
uhub0: 4 ports with 4 removable, self powered
stray irq7
Trying to mount root from ufs:/dev/ada0s2a [ro]...
random: unblocking device.
uhub1: 4 ports with 4 removable, self powered
ugen1.2: <Integral Courier> at usbus1
umass0 on uhub1
umass0: <Integral Courier, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Integral Courier PMAP> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 1912MB (3915776 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
vr0: link state changed to DOWN
vr1: link state changed to DOWN
vr2: link state changed to DOWN
vr0: link state changed to UP
vr1: link state changed to UP
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on vr1
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ng0: changing name to 'tun0'
pflog0: promiscuous mode enabled

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.