Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-08 13:34:21
From: Matthias Meyser
Description: Soekris net4801
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r309358: Fri Feb 10 16:44:11 CET 2017
    xxx@xxx.xxx:/usr/obj/usr/src/sys/CTLXFIRMA i386
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
CPU: Geode(TM) Integrated Processor by National Semi (586-class CPU)
  Origin="Geode by NSC"  Id=0x540  Family=0x5  Model=0x4  Stepping=0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
  AMD Features=0x1010000<<s16>,<s24>>
real memory  = 134217728 (128 MB)
avail memory = 99229696 (94 MB)
random: unblocking device.
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc12b3260, 0) error 19
ACPI BIOS Error (bug): A valid RSDP was not found (20160527/tbxfroot-261)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: xx:xx:xx:xx:xx:xx
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
nsphyter1: <DP83815 10/100 media interface> PHY 0 on miibus1
nsphyter1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: xx:xx:xx:xx:xx:xx
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
nsphyter2: <DP83815 10/100 media interface> PHY 0 on miibus2
nsphyter2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: xx:xx:xx:xx:xx:xx
pci0: <processor> at device 14.0 (no driver attached)
Geode Soekris net4801 comBIOS ver. 1.33 20080103 Copyright (C) 2000-2007
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
Timecounter "Geode" frequency 27000000 Hz quality 1000
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0010000-0xa0010fff irq 5 at device 19.0 on pci0
usbus0 on ohci0
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <0x0e11> at usbus0
uhub0: <0x0e11 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <HTE721010G9AT00 MCZOA51A> ATA-6 device
ada0: Serial Number xxxxxxxx
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 95396MB (195371568 512 byte sectors)
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
uhub0: 3 ports with 3 removable, self powered
Trying to mount root from ufs:/dev/gpt/root [rw]...
WARNING: / was not properly dismounted
bridge0: Ethernet address: xx:xx:xx:xx:xx:xx
bridge1: Ethernet address: xx:xx:xx:xx:xx:xx
bridge2: Ethernet address: xx:xx:xx:xx:xx:xx
bridge3: Ethernet address: xx:xx:xx:xx:xx:xx
bridge4: Ethernet address: xx:xx:xx:xx:xx:xx
bridge5: Ethernet address: xx:xx:xx:xx:xx:xx
bridge6: Ethernet address: xx:xx:xx:xx:xx:xx
bridge7: Ethernet address: xx:xx:xx:xx:xx:xx
bridge8: Ethernet address: xx:xx:xx:xx:xx:xx
bridge9: Ethernet address: xx:xx:xx:xx:xx:xx
bridge10: Ethernet address: xx:xx:xx:xx:xx:xx
bridge11: Ethernet address: xx:xx:xx:xx:xx:xx
bridge12: Ethernet address: xx:xx:xx:xx:xx:xx
bridge13: Ethernet address: xx:xx:xx:xx:xx:xx
bridge14: Ethernet address: xx:xx:xx:xx:xx:xx
bridge15: Ethernet address: xx:xx:xx:xx:xx:xx
bridge16: Ethernet address: xx:xx:xx:xx:xx:xx
bridge17: Ethernet address: xx:xx:xx:xx:xx:xx
bridge18: Ethernet address: xx:xx:xx:xx:xx:xx
epair0a: Ethernet address: xx:xx:xx:xx:xx:xx
epair0b: Ethernet address: xx:xx:xx:xx:xx:xx
epair0a: link state changed to UP
epair0b: link state changed to UP
epair2a: Ethernet address: xx:xx:xx:xx:xx:xx
epair2b: Ethernet address: xx:xx:xx:xx:xx:xx
epair2a: link state changed to UP
epair2b: link state changed to UP
epair4a: Ethernet address: xx:xx:xx:xx:xx:xx
epair4b: Ethernet address: xx:xx:xx:xx:xx:xx
epair4a: link state changed to UP
epair4b: link state changed to UP
epair6a: Ethernet address: xx:xx:xx:xx:xx:xx
epair6b: Ethernet address: xx:xx:xx:xx:xx:xx
epair6a: link state changed to UP
epair6b: link state changed to UP
epair8a: Ethernet address: xx:xx:xx:xx:xx:xx
epair8b: Ethernet address: xx:xx:xx:xx:xx:xx
epair8a: link state changed to UP
epair8b: link state changed to UP
epair10a: Ethernet address: xx:xx:xx:xx:xx:xx
epair10b: Ethernet address: xx:xx:xx:xx:xx:xx
epair10a: link state changed to UP
epair10b: link state changed to UP
epair12a: Ethernet address: xx:xx:xx:xx:xx:xx
epair12b: Ethernet address: xx:xx:xx:xx:xx:xx
epair12a: link state changed to UP
epair12b: link state changed to UP
epair14a: Ethernet address: xx:xx:xx:xx:xx:xx
epair14b: Ethernet address: xx:xx:xx:xx:xx:xx
epair14a: link state changed to UP
epair14b: link state changed to UP
epair16a: Ethernet address: xx:xx:xx:xx:xx:xx
epair16b: Ethernet address: xx:xx:xx:xx:xx:xx
epair16a: link state changed to UP
epair16b: link state changed to UP
epair18a: Ethernet address: xx:xx:xx:xx:xx:xx
epair18b: Ethernet address: xx:xx:xx:xx:xx:xx
epair18a: link state changed to UP
epair18b: link state changed to UP
epair20a: Ethernet address: xx:xx:xx:xx:xx:xx
epair20b: Ethernet address: xx:xx:xx:xx:xx:xx
epair20a: link state changed to UP
epair20b: link state changed to UP
epair22a: Ethernet address: xx:xx:xx:xx:xx:xx
epair22b: Ethernet address: xx:xx:xx:xx:xx:xx
epair22a: link state changed to UP
epair22b: link state changed to UP
epair24a: Ethernet address: xx:xx:xx:xx:xx:xx
epair24b: Ethernet address: xx:xx:xx:xx:xx:xx
epair24a: link state changed to UP
epair24b: link state changed to UP
epair26a: Ethernet address: xx:xx:xx:xx:xx:xx
epair26b: Ethernet address: xx:xx:xx:xx:xx:xx
epair26a: link state changed to UP
epair26b: link state changed to UP
epair28a: Ethernet address: xx:xx:xx:xx:xx:xx
epair28b: Ethernet address: xx:xx:xx:xx:xx:xx
epair28a: link state changed to UP
epair28b: link state changed to UP
epair30a: Ethernet address: xx:xx:xx:xx:xx:xx
epair30b: Ethernet address: xx:xx:xx:xx:xx:xx
epair30a: link state changed to UP
epair30b: link state changed to UP
bridge0: changing name to 'b100'
bridge1: changing name to 'b110'
bridge2: changing name to 'b120'
bridge3: changing name to 'b130'
bridge4: changing name to 'b140'
bridge5: changing name to 'b200'
bridge6: changing name to 'b210'
bridge7: changing name to 'b220'
bridge8: changing name to 'b250'
bridge9: changing name to 'b260'
bridge10: changing name to 'b270'
bridge11: changing name to 'b300'
bridge12: changing name to 'b310'
bridge13: changing name to 'b320'
bridge14: changing name to 'b330'
bridge15: changing name to 'b410'
bridge16: changing name to 'b420'
bridge17: changing name to 'b430'
bridge18: changing name to 'b1100'
epair0a: changing name to 'v300bresolv'
epair0b: changing name to 'v300jresolv'
epair2a: changing name to 'v110btubercel'
epair2b: changing name to 'v110jtubercel'
epair4a: changing name to 'v120btubercel'
epair4b: changing name to 'v120jtubercel'
epair6a: changing name to 'v140btubercel'
epair6b: changing name to 'v140jtubercel'
epair8a: changing name to 'v300btubercel'
epair8b: changing name to 'v300jtubercel'
epair10a: changing name to 'v410btubercel'
epair10b: changing name to 'v410jtubercel'
epair12a: changing name to 'v420btubercel'
epair12b: changing name to 'v420jtubercel'
epair14a: changing name to 'v430btubercel'
epair14b: changing name to 'v430jtubercel'
epair16a: changing name to 'v100bxenet'
epair16b: changing name to 'v100jxenet'
epair18a: changing name to 'v130bxenet'
epair18b: changing name to 'v130jxenet'
epair20a: changing name to 'v210bxenet'
epair20b: changing name to 'v210jxenet'
epair22a: changing name to 'v220bxenet'
epair22b: changing name to 'v220jxenet'
epair24a: changing name to 'v300bxenet'
epair24b: changing name to 'v300jxenet'
epair26a: changing name to 'v310bxenet'
epair26b: changing name to 'v310jxenet'
epair28a: changing name to 'v320bxenet'
epair28b: changing name to 'v320jxenet'
epair30a: changing name to 'v330bxenet'
epair30b: changing name to 'v330jxenet'
sis0: link state changed to UP
vlan0: changing name to 'v100'
vlan1: changing name to 'v110'
vlan2: changing name to 'v120'
vlan3: changing name to 'v130'
vlan4: changing name to 'v140'
vlan5: changing name to 'v200'
vlan6: changing name to 'v210'
vlan7: changing name to 'v220'
vlan8: changing name to 'v250'
vlan9: changing name to 'v260'
vlan10: changing name to 'v270'
vlan11: changing name to 'v300'
vlan12: changing name to 'v310'
vlan13: changing name to 'v320'
vlan14: changing name to 'v330'
vlan15: changing name to 'v410'
vlan16: changing name to 'v420'
vlan17: changing name to 'v430'
b100: link state changed to UP
sis0: promiscuous mode enabled
v100: promiscuous mode enabled
v100bxenet: promiscuous mode enabled
b110: link state changed to UP
v110: promiscuous mode enabled
v110btubercel: promiscuous mode enabled
b120: link state changed to UP
v120: promiscuous mode enabled
v120btubercel: promiscuous mode enabled
b130: link state changed to UP
v130: promiscuous mode enabled
v130bxenet: promiscuous mode enabled
b140: link state changed to UP
v140: promiscuous mode enabled
v140btubercel: promiscuous mode enabled
b200: link state changed to UP
v200: promiscuous mode enabled
b210: link state changed to UP
v210: promiscuous mode enabled
v210bxenet: promiscuous mode enabled
b220: link state changed to UP
v220: promiscuous mode enabled
v220bxenet: promiscuous mode enabled
b250: link state changed to UP
v250: promiscuous mode enabled
b260: link state changed to UP
v260: promiscuous mode enabled
b270: link state changed to UP
v270: promiscuous mode enabled
b300: link state changed to UP
v300: promiscuous mode enabled
v300bresolv: promiscuous mode enabled
v300btubercel: promiscuous mode enabled
v300bxenet: promiscuous mode enabled
b310: link state changed to UP
v310: promiscuous mode enabled
v310bxenet: promiscuous mode enabled
b320: link state changed to UP
v320: promiscuous mode enabled
v320bxenet: promiscuous mode enabled
b330: link state changed to UP
v330: promiscuous mode enabled
v330bxenet: promiscuous mode enabled
b410: link state changed to UP
v410: promiscuous mode enabled
v410btubercel: promiscuous mode enabled
b420: link state changed to UP
v420: promiscuous mode enabled
v420btubercel: promiscuous mode enabled
b430: link state changed to UP
v430: promiscuous mode enabled
v430btubercel: promiscuous mode enabled
sis1: link state changed to DOWN
sis2: link state changed to DOWN
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
stray irq7
stray irq7
stray irq7
stray irq7
too many stray irq 7's: not logging anymore