Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-08 19:04:05
From: unrelenting.technology
Description: HardenedBSD/amd64 on homeserver/NAS
[1] Copyright (c) 2013-2018 The HardenedBSD Project.
[1] Copyright (c) 1992-2018 The FreeBSD Project.
[1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[1] 	The Regents of the University of California. All rights reserved.
[1] FreeBSD is a registered trademark of The FreeBSD Foundation.
[1] FreeBSD 11.2-STABLE-HBSD #0 : Sun Jul 22 04:24:54 UTC 2018
[1]     root@updater-01:/usr/obj/usr/src/sys/HARDENEDBSD amd64
[1] FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
[1] VT(efifb): resolution 640x480
[1] HardenedBSD: initialize and check features (__HardenedBSD_version 1100056 __FreeBSD_version 1102501).
[1] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.12-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[1]   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[1]   AMD Features2=0x121<LAHF,ABM,Prefetch>
[1]   Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
[1]   XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 17179869184 (16384 MB)
[1] avail memory = 16425955328 (15665 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <ALASKA A M I >
[1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[1] FreeBSD/SMP: 1 package(s) x 4 core(s)
[1] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[1] SMP: AP CPU #2 Launched!
[1] SMP: AP CPU #1 Launched!
[1] SMP: AP CPU #3 Launched!
[1] Timecounter "TSC-low" frequency 1356061470 Hz quality 1000
[1] random: entropy device external interface
[1] kbd1 at kbdmux0
[1] netmap: loaded module
[1] module_register_init: MOD_LOAD (vesa, 0xffffffff80f54fb0, 0) error 19
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] nexus0
[1] cryptosoft0: <software crypto> on motherboard
[1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
[1] acpi0: <ALASKA A M I > on motherboard
[1] acpi0: Power Button (fixed)
[1] cpu0: <ACPI CPU> on acpi0
[1] cpu1: <ACPI CPU> on acpi0
[1] cpu2: <ACPI CPU> on acpi0
[1] cpu3: <ACPI CPU> on acpi0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[1] Timecounter "HPET" frequency 24000000 Hz quality 950
[1] Event timer "HPET" frequency 24000000 Hz quality 550
[1] Event timer "HPET1" frequency 24000000 Hz quality 440
[1] Event timer "HPET2" frequency 24000000 Hz quality 440
[1] Event timer "HPET3" frequency 24000000 Hz quality 440
[1] Event timer "HPET4" frequency 24000000 Hz quality 440
[1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
[1] atrtc0: Warning: Couldn't map I/O.
[1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pcib0: _OSC returned error 0x4
[1] pci0: <ACPI PCI bus> on pcib0
[1] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
[1] pci1: <ACPI PCI bus> on pcib1
[1] pci1: <network, ethernet> at device 0.0 (no driver attached)
[1] pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
[1] pci2: <ACPI PCI bus> on pcib2
[1] igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xdf020000-0xdf03ffff,0xdec00000-0xdeffffff,0xdf044000-0xdf047fff at device 0.0 on pci2
[1] igb0: Using MSIX interrupts with 5 vectors
[1] igb0: Ethernet address: [_MAC_XXXXXXXXXX]
[1] igb0: Bound queue 0 to cpu 0
[1] igb0: Bound queue 1 to cpu 1
[1] igb0: Bound queue 2 to cpu 2
[1] igb0: Bound queue 3 to cpu 3
[1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdf000000-0xdf01ffff,0xde400000-0xde7fffff,0xdf040000-0xdf043fff at device 0.1 on pci2
[1] igb1: Using MSIX interrupts with 5 vectors
[1] igb1: Ethernet address: [_MAC_XXXXXXXXXX]
[1] igb1: Bound queue 0 to cpu 0
[1] igb1: Bound queue 1 to cpu 1
[1] igb1: Bound queue 2 to cpu 2
[1] igb1: Bound queue 3 to cpu 3
[1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdd000000-0xddffffff,0xc0000000-0xcfffffff at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf630000-0xdf63ffff at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] usbus0 on xhci0
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] pci0: <simple comms> at device 22.0 (no driver attached)
[1] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf648000-0xdf649fff,0xdf64c000-0xdf64c0ff,0xdf64b000-0xdf64b7ff at device 23.0 on pci0
[1] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] ahcich1: <AHCI channel> at channel 1 on ahci0
[1] ahcich2: <AHCI channel> at channel 2 on ahci0
[1] ahcich3: <AHCI channel> at channel 3 on ahci0
[1] ahcich4: <AHCI channel> at channel 4 on ahci0
[1] ahcich5: <AHCI channel> at channel 5 on ahci0
[1] ahciem0: <AHCI enclosure management bridge> on ahci0
[1] pcib3: <ACPI PCI-PCI bridge> at device 27.0 on pci0
[1] pci3: <ACPI PCI bus> on pcib3
[1] mps0: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xdf240000-0xdf24ffff,0xdf200000-0xdf23ffff at device 0.0 on pci3
[1] mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
[1] mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
[1] pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
[1] pci4: <ACPI PCI bus> on pcib4
[1] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf500000-0xdf507fff at device 0.0 on pci4
[1] xhci1: 32 bytes context size, 64-bit DMA
[1] xhci1: Unable to map MSI-X table 
[1] usbus1 on xhci1
[1] usbus1: 5.0Gbps Super Speed USB v3.0
[1] pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
[1] pci5: <ACPI PCI bus> on pcib5
[1] pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
[1] pci6: <ACPI PCI bus> on pcib6
[1] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0
[1] pcib7: [GIANT-LOCKED]
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] pci0: <memory> at device 31.2 (no driver attached)
[1] hdac0: <Intel Sunrise Point HDA Controller> mem 0xdf640000-0xdf643fff,0xdf620000-0xdf62ffff at device 31.3 on pci0
[1] em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdf600000-0xdf61ffff at device 31.6 on pci0
[1] em0: Using an MSI interrupt
[1] em0: Ethernet address: [_MAC_XXXXXXXXXX]
[1] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[1] acpi_button0: <Sleep Button> on acpi0
[1] acpi_button1: <Power Button> on acpi0
[1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] ppc0: cannot reserve I/O port range
[1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1
[1] est1: <Enhanced SpeedStep Frequency Control> on cpu1
[1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2
[1] est2: <Enhanced SpeedStep Frequency Control> on cpu2
[1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3
[1] est3: <Enhanced SpeedStep Frequency Control> on cpu3
[1] ZFS filesystem version: 5
[1] ZFS storage pool version: features support (5000)
[1] Timecounters tick every 1.000 msec
[1] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[1] ugen1.1: <0x1b21 XHCI root HUB> at usbus1
[1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[1] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[1] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
[1] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
[1] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
[1] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
[1] pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa0
[1] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
[1] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0
[1] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1
[1] pcm4: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1
[1] uhub1: 4 ports with 4 removable, self powered
[2] uhub0: 26 ports with 26 removable, self powered
[2] mps0: SAS Address for SATA device = d1675544eddeb892
[2] mps0: SAS Address from SATA device = d1675544eddeb892
[2] mps0: SAS Address for SATA device = 3937712f6e7e614b
[2] mps0: SAS Address from SATA device = 3937712f6e7e614b
[2] mps0: SAS Address for SATA device = 383053307e7f332e
[2] mps0: SAS Address from SATA device = 383053307e7f332e
[3] usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
[3] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
[3] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
[3] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
[4] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
[4] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
[4] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
[4] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
[5] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
[5] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
[5] ugen0.2: <Unknown > at usbus0 (disconnected)
[5] uhub_reattach_port: could not allocate new device
[9] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[9] ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
[9] ses0: SEMB SES Device
[9] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
[9] ada0: <128GB SSD O1229B> ACS-2 ATA SATA 3.x device
[9] ada0: [_SERIAL_NUMBER_XXXXXXXXXX]
[9] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
[9] ada0: Command Queueing enabled
[9] ada0: 122104MB (250069680 512 byte sectors)
[9] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
[9] ada1: <TOSHIBA MK5061GSYN MH000C> ATA8-ACS SATA 2.x device
[9] ada1: [_SERIAL_NUMBER_XXXXXX]
[9] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
[9] ada1: Command Queueing enabled
[9] ada1: 476940MB (976773168 512 byte sectors)
[9] Trying to mount root from zfs:solitude-system/ROOT/default []...
[9] da0 at mps0 bus 0 scbus7 target 0 lun 0
[9] da0: <ATA WDC WD20EFRX-68E 0A82> Fixed Direct Access SPC-4 SCSI device
[9] da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
[9] da0: 600.000MB/s transfers
[9] da0: Command Queueing enabled
[9] da0: 1907729MB (3907029168 512 byte sectors)
[9] da0: quirks=0x8<4K>
[9] da1 at mps0 bus 0 scbus7 target 1 lun 0
[9] da1: <ATA ST8000DM004-2CX1 0001> Fixed Direct Access SPC-4 SCSI device
[9] da1: [_SERIAL_NUMBER_XXXXX]
[9] da1: 600.000MB/s transfers
[9] da1: Command Queueing enabled
[9] da1: 7630885MB (15628053168 512 byte sectors)
[9] da1: quirks=0x8<4K>
[9] da2 at mps0 bus 0 scbus7 target 2 lun 0
[9] da2: <ATA ST2000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
[9] da2: [_SERIAL_NUMBER_XXXXX]
[9] da2: 600.000MB/s transfers
[9] da2: Command Queueing enabled
[9] da2: 1907729MB (3907029168 512 byte sectors)
[28] random: unblocking device.
[28] mlx4_core0: <mlx4_core> mem 0xdf400000-0xdf4fffff,0xd0000000-0xd07fffff at device 0.0 on pci1
[28] <6>mlx4_core: Mellanox ConnectX core driver v3.4.1 (October 2017)
[28] mlx4_core: Initializing mlx4_core
[30] mlx4_core0: Unable to determine PCI device chain minimum BW
[30] mlx4_en mlx4_core0: Activating port:1
[30] mlxen0: Ethernet address: [_MAC_XXXXXXXXXX]
[30] mlxen0: link state changed to DOWN
[30] <4>mlx4_en: mlx4_core0: Port 1: Using 4 TX rings
[30] <4>mlx4_en: mlx4_core0: Port 1: Using 4 RX rings
[30] <4>mlx4_en: mlxen0: Using 4 TX rings
[30] <4>mlx4_en: mlxen0: Using 4 RX rings
[30] <4>mlx4_en: mlxen0: Initializing port
[31] bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
[31] lo0: link state changed to UP
[31] [zone: mbuf_jumbo_9k] kern.ipc.nmbjumbo9 limit reached
[31] <4>mlx4_en: mlxen0: Only 471 buffers allocated reducing ring size to 256
[31] igb0: promiscuous mode enabled
[31] bridge0: link state changed to UP
[31] mlxen0: promiscuous mode enabled
[31] bridge0: link state changed to DOWN
[34] igb0: link state changed to UP
[34] bridge0: link state changed to UP