Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-12 14:40:28
From: Tom Laus
Description: NetBSD 6.1.5 on HP Pavilion Laptop
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.5 (GENERIC)
total memory = 759 MB
avail memory = 733 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion Notebook PC (HP Pavilion Notebook Model GF)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 930MHz, id 0x68a
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HP-MCD,  RSDT  ,06040000>, AslId < LTP,00000000>
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 9
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 9
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 5
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 5
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 9
LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 5
LNKD: ACPI: Found matching pin for 2.3.INTA at func 0: 5
LNKA: ACPI: Found matching pin for 2.4.INTA at func 0: 9
LNKB: ACPI: Found matching pin for 2.4.INTB at func 1: 9
LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 10
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (GRFX): ACPI Display Adapter
acpiout0 at acpivga0 (LFP, 0x0400): ACPI Display Output Device
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DTV, 0x0200): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0, bios detect
acpivga0:   0x0200 (acpiout2): TV, head 0, bios detect
FIGD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
npx1 at acpi0 (MATH, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
MBRD (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
LPT (PNP0401) at acpi0 not configured
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: HP  LiON rechargeable battery
acpibat0: granularity: low->warn 0.264 Ah, warn->full 3.780 Ah
HPCI (HWPC209) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.1
pms0: Buttons 4/5, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3575 (rev. 0x03)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3577 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i830M GMCH
i915drm0: AGP at 0xe8000000 128MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x3577 (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2484 (rev. 0x01)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x2487 (rev. 0x01)
uhci2: interrupting at irq 5
usb2 at uhci2: USB revision 1.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x41)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
vendor 0x125d product 0x2838 (miscellaneous communications, revision 0x01) at pci1 dev 2 function 0 not configured
esa0 at pci1 dev 3 function 0: vendor 0x125d product 0x1988 (rev. 0x12)
esa0: interrupting at irq 5
esa0: ac97: ESS Technology ES1921 codec; 20 bit DAC, 20 bit ADC, ESS Technology
esa0: ac97: ext id 0x2<DRA>
audio0 at esa0: full duplex, playback, capture, mmap, independent
cbb0 at pci1 dev 4 function 0: vendor 0x1217 product 0x6933 (rev. 0x01)
cbb1 at pci1 dev 4 function 1: vendor 0x1217 product 0x6933 (rev. 0x01)
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x41)
fxp0: interrupting at irq 10
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 9
cardslot0 at cbb0
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x10
cbb1: bhlc 0x821000
cbb1: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb1: interrupting at irq 9
cardslot1 at cbb1
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x248c (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2483 (rev. 0x01)
ichsmb0: interrupting at irq 9
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat  84 us, pow     0 mW
acpicpu0: C3: I/O, lat 168 us, pow     0 mW
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
acpibat0: HP  LiON rechargeable battery
acpibat0: granularity: low->warn 0.264 Ah, warn->full 3.780 Ah
wd0 at atabus0 drive 0
wd0: <FUJITSU MHV2060AH>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2502, 5100711933, 1011> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: normal capacity on 'charge state'