Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-13 19:34:48
From: tingo
Description: FreeBSD/amd64 on ASRock BeeBox N3000
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p24 #0: Wed Nov 15 04:57:40 UTC 2017
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Celeron(R) CPU  N3000  @ 1.04GHz (1040.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16207974400 (15457 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  4
random: <Software, Yarrow> initialized
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150515/tbfadt-644)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc6de0, 0) error 19
kbd1 at kbdmux0
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x91415000-0x914157ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Realtek (0x0283) HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek (0x0283) Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek (0x0283) (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDMCEAC120A3 LLGi> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: Previously was known as ad6
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1040035347 Hz quality 1000
Root mount waiting for: usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Realtek> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <Seagate> at usbus0
umass0: <Seagate BUP Slim BK, class 0/0, rev 3.00/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:2:0:-1: Attached to scbus2
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Seagate BUP Slim BK 0304> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 400.000MB/s transfers
da0: 1907729MB (3907029167 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
bridge0: Ethernet address: xx:xx:xx:xx:xx:xx
tap0: Ethernet address: xx:xx:xx:xx:xx:xx
tap1: Ethernet address: xx:xx:xx:xx:xx:xx
tap2: Ethernet address: xx:xx:xx:xx:xx:xx
tap3: Ethernet address: xx:xx:xx:xx:xx:xx
tap4: Ethernet address: xx:xx:xx:xx:xx:xx
tap5: Ethernet address: xx:xx:xx:xx:xx:xx
re0: link state changed to DOWN
re0: promiscuous mode enabled
bridge0: link state changed to DOWN
tap0: promiscuous mode enabled
tap1: promiscuous mode enabled
tap2: promiscuous mode enabled
tap3: promiscuous mode enabled
tap4: promiscuous mode enabled
tap5: promiscuous mode enabled
re0: link state changed to UP
bridge0: link state changed to UP
ubt0: <Bluetooth Radio> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()