Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-14 02:02:48
From: bal4
Description: FreeBSD/i386 11.2-RELEASE on VIA EPIA-LT
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0: Wed Sep 19 23:42:09 CDT 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/XX i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
CPU: VIA Esther processor 1000MHz (997.50-MHz 686-class CPU)
  Origin="CentaurHauls"  Id=0x6a9  Family=0x6  Model=0xa  Stepping=9
  Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
  Features2=0x181<SSE3,EST,TM2>
  VIA Padlock Features=0x3fcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
real memory  = 1073741824 (1024 MB)
avail memory = 972464128 (927 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Timecounter "TSC" frequency 997496624 Hz quality 800
random: entropy device external interface
random: registering fast source VIA Nehemiah Padlock RNG
random: fast provider: "VIA Nehemiah Padlock RNG"
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
padlock0: <AES-CBC,SHA1,SHA256> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA VT3324 (CX700) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xa0000000-0xbfffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
atapci0: <VIA CX700 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 20 at device 16.0 on pci0
uhci0: LegSup = 0xa000
usbus0 on uhci0
uhci1: <VIA 83C572 USB controller> port 0xe880-0xe89f irq 22 at device 16.1 on pci0
uhci1: LegSup = 0xa000
usbus1 on uhci1
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.2 on pci0
uhci2: LegSup = 0xa000
usbus2 on uhci2
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 23 at device 16.4 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
hdac0: <VIA VT8251/8237A HDA Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 1.0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xfeaffc00-0xfeaffcff irq 18 at device 8.0 on pci3
vr0: Quirks: 0x0
vr0: Revision: 0x8d
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: Ethernet address: xx:xx:xx:xx:xx:xx
vr1: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfeaff800-0xfeaff8ff irq 19 at device 9.0 on pci3
vr1: Quirks: 0x0
vr1: Revision: 0x8d
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: Ethernet address: xx:xx:xx:xx:xx:xx
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0xa80-0xa87 irq 3 on acpi0
uart3: <16550 or compatible> port 0xa88-0xa8f irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd1800-0xd37ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor CentaurHauls, msr 8100a1308000a13
device_attach: est0 attach returned 6
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat loadable, default to deny, logging disabled
hdacc0: <VIA VT1708_8 HDA CODEC> at cad 0 on hdac0
hdaa0: <VIA VT1708_8 Audio Function Group> at nid 1 on hdacc0
pcm0: <VIA VT1708_8 (Rear Analog)> at nid 31 and 29,30 on hdaa0
pcm1: <VIA VT1708_8 (Front Analog Mic)> at nid 33 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <VIA UHCI root HUB> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA UHCI root HUB> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <VIA UHCI root HUB> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA EHCI root HUB> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ada0 at ata1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD3200AAJB-00J3A0 01.03E01> ATA8-ACS device
ada0: Serial Number xxxxxxxx
ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada0: 305245MB (625142448 512 byte sectors)
Trying to mount root from ufs:ada0p3.elia []...
cd0 at ata1 bus 0 scbus1 target 1 lun 0
cd0: <PLEXTOR DVDR   PX-870A 1.02> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfersuhub3: 6 ports with 6 removable, self powered
 (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed