Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-19 23:12:07
From: Sevan / Venture37
Description: 17inch 1.5GHz PowerBook G4 (PowerBook5,5 1.5GB RAM, Airport Extreme, BlueTooth)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.25 (GENERIC) #0: Wed Oct 17 23:36:58 UTC 2018 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC total memory = 1536 MB oea_startup: failed to allocate DEAD ZONE: error=12 avail memory = 1474 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f4000000/ata-6@d/disk@0:0/netbsd mainbus0 (root) cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary) cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1 cpu0: 1504.64 MHz, 512KB L2 cache no parity memory0 at mainbus0: len=256 spdmem0 at memory0 spdmem0: DDR SDRAM, no parity or ECC, 512MB, 333MHz (PC-2700) spdmem0: 13 rows, 10 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7 spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) spdmem1 at memory0 spdmem1: DDR SDRAM, no parity or ECC, 1GB, 333MHz (PC-2700) spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7 spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 hw-clock at uni_n0 not configured ki2c0 at uni_n0 address 0xf8001000 iic0 at ki2c0: I2C bus dbcool0 at iic0 addr 0xae dbcool0: ADT7463 dBCool(tm) Controller (rev 0x06, stepping 0x0a) lmu-controller at iic0 addr 0x42 not configured cereal at iic0 addr 0xe0 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00) radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon Mobility 9600/9700 (M10/11) NP (rev. 0x00) radeonfb0: Video BIOS not present radeonfb0: No video BIOS, using default clocks radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000 radeonfb0: 64 MB aperture at 0xb8000000, 64 KB registers at 0xb0000000 radeonfb0: display 0: initial virtual resolution 1440x900 at 8 bpp radeonfb0: using 32 MB per display radeonfb0: port 0: physical 1440x900 60Hz radeonfb0: port 1: physical 1440x900 60Hz wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at radeonfb0 not configured uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) bwi0 at pci1 dev 18 function 0: Broadcom Wireless bwi0: interrupting at irq 52 bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0 bwi0: MAC: rev 5 bwi0: PHY type 2, rev 2, ver 2 bwi0: RF manu 0x17f, type 0x2050, rev 2 bwi0: autoconfiguration error: invalid antenna gain in sprom bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0 at pci1 dev 19 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00) obio0 at pci1 dev 23 function 0: addr 0x80000000 zsc0 at obio0 irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 12 pmu0: initializing IIC bus iic1 at pmu0: I2C bus pmu0: initializing RTC pmu0: initializing ADB nadb0 at pmu0: Apple Desktop Bus pmu0: power-mgt not configured smartbat0 at pmu0 addr 0: smart battery flags: 5 AC present ki2c1 at obio0 iic2 at ki2c1: I2C bus cereal at iic2 addr 0xe0 not configured deq0 at iic2 addr 0x35 Audio Codec (tas3004) wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer atabus0 at wdc0 channel 0 snapper0: codec: TAS3004 audio0 at snapper0: full duplex, playback, capture, mmap snapper0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 snapper0: Latency: 256 milliseconds spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci0: autoconfiguration error: memory access is disabled ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci1: autoconfiguration error: memory access is disabled ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00) ohci2: interrupting at irq 29 ohci2: OHCI version 1.0, legacy support usb0 at ohci2: USB revision 1.0 ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43) ohci3: interrupting at irq 63 ohci3: OHCI version 1.0 usb1 at ohci3: USB revision 1.0 ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43) ohci4: interrupting at irq 63 ohci4: OHCI version 1.0 usb2 at ohci4: USB revision 1.0 ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04) ehci0: interrupting at irq 63 ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4 usb3 at ehci0: USB revision 2.0 cbb0: cacheline 0x8 lattimer 0x10 cbb0: bhlc 0x21008 cbb0: interrupting at irq 53 cardslot0 at cbb0 cardbus0 at cardslot0: bus 1 pcmcia0 at cardslot0 uninorth2 at mainbus0 pci2 at uninorth2 bus 0 pci2: i/o space, memory space enabled pchb2 at pci2 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) wdc1 at pci2 dev 13 function 0: interrupting at irq 39 atabus1 at wdc1 channel 0 fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81) fwohci0: interrupting at irq 40 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0a:95:ff:fe: fwohci0: autoconfiguration error: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80) gem0: interrupting at irq 41 makphy0 at gem0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 1 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto gem0: Ethernet address 00:0a:95:, 10KB RX fifo, 4KB TX fifo vmmask 737e0000 schedmask 7ffe0000 highmask 7ffe0000 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 18432000 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 5 ports with 5 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-825, , DAM5> cdrom removable cd0: drive supports PIO mode 4IPsec: Initialized Security Association Processing. , DMA mode 2, Ultra-DMA mode 4 (Ultra/66) cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) adbkbd0 at nadb0 addr 2: iBook keyboard wskbd0 at adbkbd0 mux 1 wskbd0: connecting to wsdisplay0 wsmouse0 at adbkbd0 mux 0 adbms0 at nadb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse1 at adbms0 mux 0 adbbt0 at nadb0 addr 7: button device AC Power: AC adapter online. uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/15.86, addr 2, iclass 3/1 ukbd0 at uhidev0 umass0 at uhub3 port 1 configuration 1 interface 0 umass0: Verbatim (0x18a5) STORE N GO (0x302), rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Verbatim, STORE N GO, 1.00> disk removable sd0: fabricating a geometry sd0: 15283 MB, 15283 cyl, 64 head, 32 sec, 512 bytes/sect x 31299584 sectors sd0: fabricating a geometry wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: Apple Computer (0x5ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 2.00/15.86, addr 2, iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse2 at ums0 mux 0 wd0 at atabus1 drive 0 wd0: <Hitachi HTS548080M9AT00> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) swwdog0: software watchdog initialized WARNING: 4 errors while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/macppc/8.99.25/modules