Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2018-10-20 18:49:54
From: gumnos
Description: Dell Inspiron 1010 (Mini10)
OpenBSD 6.4 (GENERIC.MP) #943: Thu Oct 11 13:51:32 MDT 2018
real mem  = 2137178112 (2038MB)
avail mem = 2083102720 (1986MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 05/20/09, BIOS32 rev. 0 @ 0xfdc80, SMBIOS rev. 2.5 @ 0xf2430 (40 entries)
bios0: vendor Dell Inc. version "A05" date 05/20/2009
bios0: Dell Inc. Inspiron 1010
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: wakeup devices PWRB(S3) PXS1(S5) PXS2(S3) USB1(S3) USB2(S3) USB3(S0) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz ("GenuineIntel" 686-class) 1.34 GHz, 06-1c-02
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz ("GenuineIntel" 686-class) 1.34 GHz, 06-1c-02
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(10@140 mwait.3@0x52), !C3(100@100 mwait.3@0x30), !C2(500@20 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(10@140 mwait.3@0x52), !C3(100@100 mwait.3@0x30), !C2(500@20 mwait.1@0x10), C1(1000@1 mwait.1), PSS
"CPL0002" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpicmos0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 serial 11 type Lion oem "Dell"
"SYN0601" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 1331 MHz: speeds: 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel US15W Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel US15W Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel SCH HD Audio" rev 0x07: apic 2 int 22
azalia0: codecs: Realtek ALC269, CMD Technology/0x1392, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel SCH PCIE" rev 0x07: apic 2 int 17
pci1 at ppb0 bus 2
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address [_MAC_XXXXXXXXXX]
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel SCH PCIE" rev 0x07: apic 2 int 16
pci2 at ppb1 bus 3
athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 17
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address [_MAC_XXXXXXXXXX]
uhci0 at pci0 dev 29 function 0 "Intel SCH USB" rev 0x07: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel SCH USB" rev 0x07: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel SCH USB" rev 0x07: apic 2 int 18
ehci0 at pci0 dev 29 function 7 "Intel SCH USB" rev 0x07: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel SCH LPC" rev 0x07
pciide0 at pci0 dev 31 function 1 "Intel SCH IDE" rev 0x07: DMA, channel 0 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <OCZ-AGILITY2>
wd0: 16-sector PIO, LBA48, 57241MB, 117231408 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x20801
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub4 at uhub0 port 1 configuration 1 interface 0 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 2
uvideo0 at uhub0 port 6 configuration 1 interface 0 "SuYin Integrated Webcam" rev 2.00/8c.02 addr 3
video0 at uvideo0
umass0 at uhub0 port 7 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable serial.0bda0158114173400000
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 57239MB, 512 bytes/sector, 117225713 sectors
root on sd1a (db8449a598e77353.a) swap on sd1b dump on sd1b
athn0: reused group key update received from [_MAC_XXXXXXXXXX]