Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-22 05:59:32
From: gk
Description: FreeBSD/amd64 on Supermicro Super Server
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #0: Thu Sep  6 07:14:16 UTC 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2623 v3 @ 3.00GHz (3000.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165553664 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1500030220 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xfb220000-0xfb23ffff,0xfb244000-0xfb247fff irq 40 at device 0.0 numa-domain 0 on pci4
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xfb200000-0xfb21ffff,0xfb240000-0xfb243fff irq 44 at device 0.1 numa-domain 0 on pci4
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: Bound queue 4 to cpu 4
igb1: Bound queue 5 to cpu 5
igb1: Bound queue 6 to cpu 6
igb1: Bound queue 7 to cpu 7
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd020-0xd03f mem 0xfb120000-0xfb13ffff,0xfb144000-0xfb147fff irq 42 at device 0.0 numa-domain 0 on pci5
igb2: Using MSIX interrupts with 9 vectors
igb2: Ethernet address: xx:xx:xx:xx:xx:xx
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: Bound queue 4 to cpu 4
igb2: Bound queue 5 to cpu 5
igb2: Bound queue 6 to cpu 6
igb2: Bound queue 7 to cpu 7
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xfb100000-0xfb11ffff,0xfb140000-0xfb143fff irq 45 at device 0.1 numa-domain 0 on pci5
igb3: Using MSIX interrupts with 9 vectors
igb3: Ethernet address: xx:xx:xx:xx:xx:xx
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: Bound queue 4 to cpu 4
igb3: Bound queue 5 to cpu 5
igb3: Bound queue 6 to cpu 6
igb3: Bound queue 7 to cpu 7
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb338000-0xfb3387ff irq 16 at device 17.4 numa-domain 0 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb300000-0xfb30ffff irq 19 at device 20.0 numa-domain 0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb334000-0xfb3343ff irq 18 at device 26.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 numa-domain 0 on pci8
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb333000-0xfb3333ff irq 18 at device 29.0 numa-domain 0 on pci1
usbus2: EHCI version 1.0
usbus2 numa-domain 0 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb332000-0xfb3327ff irq 16 at device 31.2 numa-domain 0 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <Crucial CT500MX200SSD1 MU03> ACS-3 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <Crucial CT500MX200SSD1 MU03> ACS-3 ATA SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
GEOM_MIRROR: Device mirror/root launched (2/2).
GEOM_MIRROR: Device mirror/var launched (2/2).
GEOM_MIRROR: Device mirror/tmp launched (2/2).
Trying to mount root from ufs:/dev/mirror/root [rw]...
random: unblocking device.
warning: total configured swap (33554432 pages) exceeds maximum recommended amount (32523848 pages).
warning: increase kern.maxswzone or reduce amount of swap.
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 21 ports with 21 removable, self powered
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4 numa-domain 0 on uhub0
uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x0557 product 0x8021> at usbus0
uhub5 numa-domain 0 on uhub1
uhub5: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 1> on usbus0
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen0.3: <ATEN International Co. Ltd CS1708A V1.8.172> at usbus0
ukbd0 numa-domain 0 on uhub5
ukbd0: <ATEN International Co. Ltd CS1708A V1.8.172, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <vendor 0x0557 product 0x7000> at usbus0
uhub6 numa-domain 0 on uhub1
uhub6: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0
uhub6: 4 ports with 3 removable, self powered
igb2: link state changed to UP
ugen0.5: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 numa-domain 0 on uhub6
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
kbd3 at ukbd1
ums0 numa-domain 0 on uhub6
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
igb0: link state changed to UP
uhid0 numa-domain 0 on uhub5
uhid0: <ATEN International Co. Ltd CS1708A V1.8.172, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums1 numa-domain 0 on uhub5
ums1: <ATEN International Co. Ltd CS1708A V1.8.172, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums1: 5 buttons and [XYZ] coordinates ID=0
ums2 numa-domain 0 on uhub5
ums2: <ATEN International Co. Ltd CS1708A V1.8.172, class 0/0, rev 1.10/1.00, addr 2> on usbus0