Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-23 08:55:14
From: matas
Description: FreeBSD/amd64 on FUJITSU CELSIUS W530
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p2 #0 r338243: Thu Aug 23 15:42:10 CEST 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (3392.21-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8181391360 (7802 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <FTS    D3227-A1>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1696104357 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4570, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <FUJ PC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1
drmn0: <Turks [AMD FirePro V3900]> on vgapci0
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (TURKS 0x1002:0x674A 0x1002:0x0106).
info: [drm] register mmio base: 0xF7E20000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=674a
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: C33110
drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
info: [drm] Detected VRAM RAM=1024M, BAR=256M
info: [drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 4133438 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 1024M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] MSI enabled 1 message(s)
drmn0: info: radeon: using MSI.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 8086:c01 = 3/e
info: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
info: [drm] Loading TURKS Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80004569c00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80004569c0c
info: [drm] ring test on 0 succeeded in 4 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xf0000000
radeon_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
radeon_iicbb1 on drmn0
iicbus1: <Philips I2C bus> on iicbb1 addr 0xff
iic1: <I2C generic I/O> on iicbus1
radeon_iicbb2 on drmn0
iicbus2: <Philips I2C bus> on iicbb2 addr 0xff
iic2: <I2C generic I/O> on iicbus2
radeon_iicbb3 on drmn0
iicbus3: <Philips I2C bus> on iicbb3 addr 0xff
iic3: <I2C generic I/O> on iicbus3
radeon_iicbb4 on drmn0
iicbus4: <Philips I2C bus> on iicbb4 addr 0xff
iic4: <I2C generic I/O> on iicbus4
radeon_iicbb5 on drmn0
iicbus5: <Philips I2C bus> on iicbb5 addr 0xff
iic5: <I2C generic I/O> on iicbus5
radeon_iicbb6 on drmn0
iicbus6: <Philips I2C bus> on iicbb6 addr 0xff
iic6: <I2C generic I/O> on iicbus6
radeon_iicbb7 on drmn0
iicbus7: <Philips I2C bus> on iicbb7 addr 0xff
iic7: <I2C generic I/O> on iicbus7
drm_iic_dp_aux0 on drmn0
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   DP-1
info: [drm]   HPD4
info: [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY2
info: [drm] Connector 1:
info: [drm]   DVI-I-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
info: [drm]   Encoders:
info: [drm]     DFP2: INTERNAL_UNIPHY
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DVI-I-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-I-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] fb mappable at 0xE0142000
info: [drm] vram apper at 0xE0000000
info: [drm] size 14745600
info: [drm] fb depth is 24
info: [drm]    pitch is 10240
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
vgapci0: Boot video device
hdac0: <ATI RV930 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xf7f00000-0xf7f1ffff,0xf7f39000-0xf7f39fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f38000-0xf7f383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f37000-0xf7f373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7f36000-0xf7f367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC671 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC671 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC671 (Analog)> at nid 23 and 24,26 on hdaa1
pcm2: <Realtek ALC671 (Front Analog)> at nid 20 and 25 on hdaa1
pcm3: <Realtek ALC671 (Rear Analog Line-out)> at nid 33 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <ST31000528AS CC38> ATA8-ACS SATA 2.x device
ada1: Serial Number xxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <KINGSTON SV300S37A480G 583ABBF0> ATA8-ACS SATA 3.x device
ada2: Serial Number xxxxxxxx
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 457862MB (937703088 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/hrootfs [rw]...
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GHA2N TF04> Removable CD-ROM SCSI device
cd0: Serial Number xxxxxxxx
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
random: unblocking device.
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 21 ports with 21 removable, self powered
ugen0.2: <Logitech USB Optical Mouse> at usbus0
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <APC Back-UPS ES 550G FW870.O2 .I USB FWO2> at usbus0
ugen0.4: <Generic USB2.0-CRW> at usbus0
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus5 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus5 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus5 target 0 lun 3
da3: <Generic- M.S./M.S.Pro/HG 1.00> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
bridge0: Ethernet address: xx:xx:xx:xx:xx:xx
tap0: Ethernet address: xx:xx:xx:xx:xx:xx
bridge0: link state changed to UP
em0: promiscuous mode enabled
tap0: promiscuous mode enabled
bridge0: link state changed to DOWN
ums0 on uhub1
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
bridge0: link state changed to UP