Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-11-24 16:23:01
From: hlh
Description: PINE64 2GB
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RC2 r340839 PINE64 arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 47ffe000 mode 2 pages 2
MAP 48005000 mode 2 pages 2
MAP b8f16000 mode 2 pages 1
MAP bdfb9000 mode 2 pages 2
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
iichb0: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 38 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 33 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 16,17,18 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
aw_nmi0: <Allwinner NMI Controller> mem 0x1f00c00-0x1f00fff irq 36 on simplebus0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 37 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 40 on iicbus0
gpiobus2: <OFW GPIO bus> on axp8xx_pmu0
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 5,6 on simplebus0
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 34,35 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 4 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 8 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 12 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 13 on simplebus0
usbus1 on ohci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 14 on simplebus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 15 on simplebus0
usbus3 on ohci1
gpioc0: <GPIO controller> on gpio0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 22 on simplebus0
uart0: console (115384,n,8,1)
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 32 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
awg0: Ethernet address: [_MAC_XXXXXXXXXX]
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on axp8xx_pmu0
iic0: <I2C generic I/O> on iicbus0
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 39 on simplebus0
cryptosoft0: <software crypto>
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen2.1: <Allwinner EHCI root HUB> at usbus2
uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
mmcsd0: 16GB <SDHC SL16G 8.0 SN A9A41D45 MFG 03/2017 by 3 SD> at mmc0 50.0MHz/4bit/32768-block
Release APs...done
Trying to mount root from zfs:rpool/ROOT/default [rw,noatime]...
mmc0: CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Failed to set VCCQ for card at relative address 43690
Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <0>
Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
ugen2.2: <vendor 0x1a40 USB 2.0 Hub> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus2
Root mount waiting for: usbus2
uhub4: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen2.3: <vendor 0x1a40 USB 2.0 Hub> at usbus2
uhub5 on uhub4
uhub5: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus2
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
ugen2.4: <Western Digital Elements 25A2> at usbus2
umass0 on uhub5
umass0: <Western Digital Elements 25A2, class 0/0, rev 2.10/10.14, addr 4> on usbus2
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <WD Elements 25A2 1014> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 476908MB (976707584 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.5: <Western Digital Elements 25A2> at usbus2
umass1 on uhub5
umass1: <Western Digital Elements 25A2, class 0/0, rev 2.10/10.14, addr 5> on usbus2
da1 at umass-sim1 bus 1 scbus1 target 0 lun 0
da1: <WD Elements 25A2 1014> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da1: 40.000MB/s transfers
da1: 476908MB (976707584 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
GEOM_MIRROR: Force device swap start due to timeout.
GEOM_MIRROR: Cancelling unmapped because of da0p2.
GEOM_MIRROR: Device mirror/swap launched (1/2).
lo0: link state changed to UP
awg0: link state changed to DOWN
awg0: link state changed to UP
pflog0: promiscuous mode enabled
WARNING: attempt to domain_add(netgraph) after domainfinalize()
gif0: link state changed to UP