Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2018-11-25 08:06:55
From: zk
Description: VIA EPIA-ML6000EA
OpenBSD 6.4 (GENERIC) #926: Thu Oct 11 13:43:06 MDT 2018
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
real mem  = 502747136 (479MB)
avail mem = 478527488 (456MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 08/25/05, BIOS32 rev. 0 @ 0xfa910, SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date 08/25/2005
bios0: VIA Technologies, Inc. VT8623-8235
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices PCI0(S5) USB0(S5) USB1(S5) USB2(S5) USB3(S3) USB4(S3) USB5(S3) USB6(S3) LAN0(S5) AC97(S5) MC97(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: !C3(@900 io@0x415), !C2(@90 io@0x414), C1(@1 halt!)
acpibtn0 at acpi0: PWRB
acpicmos0 at acpi0
bios0: ROM list: 0xc0000/0xfe00
cpu0 at mainbus0: (uniprocessor)
cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 667 MHz, 06-09-08
cpu0: FPU,V86,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2300CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BEVE-00UYT0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address XX:XX:XX:XX:XX:XX
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x004063, model 0x0032
rl0 at pci0 dev 20 function 0 "Realtek 8139" rev 0x10: irq 10, address XX:XX:XX:XX:XX:XX
rlphy0 at rl0 phy 0: RTL internal PHY
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd0: 76316MB, 512 bytes/sector, 156295793 sectors
root on sd0a (b7a38a860e502993.a) swap on sd0b dump on sd0b
wd0a: aborted command, interface CRC error reading fsbn 720 of 720-735 (wd0 bn 784; cn 0 tn 12 sn 28), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0a: aborted command, interface CRC error reading fsbn 720 of 720-735 (wd0 bn 784; cn 0 tn 12 sn 28), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd0a: aborted command, interface CRC error reading fsbn 7216 of 7216-7247 (wd0 bn 7280; cn 0 tn 115 sn 35), retrying
wd0: soft error (corrected)