Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-11-27 18:56:54
From: Kapper1224
Description: NetBSD/i386 8.0 on CF-U1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 2037 MB
avail memory = 1985 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Panasonic Corporation CF-U1GQGXG2M (002)
mainbus0 (root)
ACPI: RSDP 0x00000000000F03B0 000024 (v02 MATBIO)
ACPI: XSDT 0x000000007F5E4F10 00006C (v01 MATBIO CFU1-2 06222004 MSFT 00010013)
ACPI: FACP 0x000000007F5E3C10 0000F4 (v04 MATBIO CFU1-2 06222004 MSFT 00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20170303/tbfadt-642)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x00000000000009F4/0x0 (20170303/tbfadt-693)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170303/tbfadt-745)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170303/tbfadt-745)
ACPI: DSDT 0x000000007F5D9010 0091FC (v01 MATBIO CFU1-2 00000000 INTL 20061109)
ACPI: FACS 0x000000007F5E8E40 000040
ACPI: FACS 0x000000007F5E8D40 000040
ACPI: APIC 0x000000007F5E5E90 00005C (v02 MATBIO CFU1-2 06222004 MSFT 00010013)
ACPI: MCFG 0x000000007F5E5E10 00003C (v01 A M I OEMMCFG 06222004 MSFT 00000097)
ACPI: HPET 0x000000007F5E5D90 000038 (v01 A M I OEMHPET 06222004 AMI. 00000003)
ACPI: SLIC 0x000000007F5D1E10 000176 (v01 MATBIO CFU1-2 06222004 AMI 00010013)
ACPI: SSDT 0x000000007F5ABA10 0004CE (v02 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x000000007F5D1C10 00018C (v02 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x000000007F5ABF10 0000A0 (v02 PmRef Cpu1Tst 00003000 INTL 20061109)
ACPI: TCPA 0x000000007F5E5D10 000032 (v02 MATBIO CFU1-2 00000001 MSFT 01000013)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz, id 0x106c2
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz, id 0x106c2
cpu1: package 0, core 0, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <MATBIO,CFU1-2 ,06222004>, AslId <MSFT,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C3735644 000239 (v02 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C3AA3004 0006AB (v02 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C3702C54 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C37170AC 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
MCH (PNP0C02) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FWH (INT0800) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
PMSC (PNP0C02) at acpi0 not configured
ICH (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0120): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpivga0: connected output devices:
acpivga0: 0x0120 (acpiout0): VGA Analog Monitor, index 0, port 2, head 0, bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
CMC (PNP0C02) at acpi0 not configured
RMEM (PNP0C02) at acpi0 not configured
MISC (MAT0021) at acpi0 not configured
HKEY (MAT0019) at acpi0 not configured
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
acpibat0: Panasonic LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh
acpibat1 at acpi0 (BAT2, PNP0C0A-1): ACPI Battery
acpibat1: Panasonic LION rechargeable battery
acpibat1: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 97.0 C, passive 80.0 C, passive cooling
OMSC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (UMD0, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (UMD3, PNP0C14-3): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpiwmi2 at acpi0 (UMD4, PNP0C14-4): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
acpiwmi3 at acpi0 (UMD5, PNP0C14-5): ACPI WMI Interface
acpiwmibus at acpiwmi3 not configured
acpiwmi4 at acpi0 (UMD6, PNP0C14-6): ACPI WMI Interface
acpiwmibus at acpiwmi4 not configured
acpiwmi5 at acpi0 (UMD7, PNP0C14-7): ACPI WMI Interface
acpiwmibus at acpiwmi5 not configured
acpiwmi6 at acpi0 (DTMS, PNP0C14-10): ACPI WMI Interface
acpiwmibus at acpiwmi6 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 8100 (rev. 0x06)
vga0 at pci0 dev 2 function 0: vendor 8086 product 8108 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 11d4 product 1883
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
ppb0 at pci0 dev 28 function 0: vendor 8086 product 8110 (rev. 0x06)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci1 dev 0 function 0: vendor 8086 product 4232 (rev. 0x00)
iwn0: interrupting at msi0 vec 0
iwn0: MIMO 1T2R, MoW, address [_MAC_XXXXXXXXXX]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 8086 product 8114 (rev. 0x06)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 8115 (rev. 0x06)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 8116 (rev. 0x06)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 8117 (rev. 0x06)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
sdhc0 at pci0 dev 30 function 0: vendor 8086 product 811c (rev. 0x06)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 1.0, rev 255, SDMA, 48000 kHz, HS 3.3V, 2048 byte blocks
sdmmc0 at sdhc0 slot 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 8119 (rev. 0x06)
schide0 at pci0 dev 31 function 1: Intel SCH IDE Controller (rev. 0x06)
schide0: bus-master DMA support present
schide0: primary channel wired to compatibility mode
schide0: primary channel interrupting at ioapic0 pin 14
atabus0 at schide0 channel 0
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
isapnp0 at isa0 port 0x279
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1600 MHz
acpicpu0: P1: FFH, lat 10 us, pow 1533 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 1066 mW, 1067 MHz
acpicpu0: P3: FFH, lat 10 us, pow 600 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub3 port 5
ugen0: Qualcomm Incorporated (0x4da) Qualcomm Gobi 2000 (0x250e), rev 2.00/0.02, addr 2
wd0 at atabus0 drive 0
wd0: <TS64GSSD10-M>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 61064 MB, 132337 cyl, 15 head, 63 sec, 512 bytes/sect x 125059072 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(schide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.0/modules
WARNING: clock gained 17 days
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Fujitsu Component (0x430) USB Touch Panel (0x530), rev 1.10/50.01, addr 2, iclass 3/1
uts0 at uhidev0wsmouse0 at uts0 mux 0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhidev1 at uhub0 port 1 configuration 1 interface 0
uhidev1: Logitech (0x46d) USB Mouse (0xc001), rev 1.10/29.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse1 at ums0 mux 0