Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-11-30 02:40:22
From: jklos
Description: API CS-20 (HP AlphaServer DS20L)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_STABLE (GENERIC-$Revision: 1.386 $) #0: Wed Nov 28 10:18:58 UTC 2018
[_EMAIL_XXXXXXX]:/usr/obj-alpha/sys/arch/alpha/compile/HERA
COMPAQ AlphaServer DS20L 833 MHz, s/n 12
8192 byte page size, 2 processors.
total memory = 2048 MB
(2776 KB reserved for PROM, 2045 MB used by NetBSD)
avail memory = 2006 MB
timecounter: Timecounters tick every 0.976 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
WARNING: module error: sequencer: can't find builtin dependency `midi'
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264B-4
cpu0: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
cpu1 at mainbus0: ID 1, 21264B-4
cpu1: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 4 Dchips, 1 memory bus of 32 bytes
tsc0: arrays present: 1024MB, 1024MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
esiop0 at pci0 dev 3 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at dec 6600 irq 16
scsibus0 at esiop0: 16 targets, 8 luns per target
fxp0 at pci0 dev 4 function 0: i82550 Ethernet (rev. 0x0c)
fxp0: interrupting at dec 6600 irq 20
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb0 at pci0 dev 5 function 0: vendor 12d8 product e111 (rev. 0x02)
ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1912 product 0015 (rev. 0x02)
xhci0: interrupting at dec 6600 irq 24
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
sio0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0xc3)
aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc2)
aceride0: bus-master DMA support present, but unused (forced off by config file)
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at isa irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at isa irq 15
atabus1 at aceride0 channel 1
vendor 10b9 product 7101 (miscellaneous prehistoric) at pci0 dev 17 function 0 not configured
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
isabeep0 at pcppi0
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
tsp1 at tsc0
pci2 at tsp1 bus 0
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
fxp1 at pci2 dev 3 function 0: i82559 Ethernet (rev. 0x08)
fxp1: interrupting at dec 6600 irq 32
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wm0 at pci2 dev 4 function 0: Intel i82541PI 1000BASE-T Ethernet (rev. 0x05)
wm0: interrupting at dec 6600 irq 36
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x220402<LOCK_EECD,IOH_VALID,ASF_FIRM,WOL>
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
tsciic0 at tsc0
iic0 at tsciic0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: SDRAM (registered), data ECC, 256MB, 125MHz (PC-100)
spdmem0: 12 rows, 11 cols, 1 banks, 4 banks/chip, 8.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem0: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: SDRAM (registered), data ECC, 256MB, 125MHz (PC-100)
spdmem1: 12 rows, 11 cols, 1 banks, 4 banks/chip, 8.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem1: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem2 at iic0 addr 0x52
spdmem2: SDRAM (registered), data ECC, 256MB, 125MHz (PC-100)
spdmem2: 12 rows, 11 cols, 1 banks, 4 banks/chip, 8.0ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem2: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem3 at iic0 addr 0x53
spdmem3: SDRAM (registered), data ECC, 256MB, 125MHz (PC-100)
spdmem3: 12 rows, 11 cols, 1 banks, 4 banks/chip, 8.0ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem3: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem4 at iic0 addr 0x54
spdmem4: SDRAM (registered), data ECC, 256MB, 100MHz (PC-100)
spdmem4: 12 rows, 11 cols, 1 banks, 4 banks/chip, 10.0ns cycle time
spdmem4: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem4: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem5 at iic0 addr 0x55
spdmem5: SDRAM (registered), data ECC, 256MB, 100MHz (PC-100)
spdmem5: 12 rows, 11 cols, 1 banks, 4 banks/chip, 10.0ns cycle time
spdmem5: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem5: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem6 at iic0 addr 0x56
spdmem6: SDRAM (registered), data ECC, 256MB, 100MHz (PC-100)
spdmem6: 12 rows, 11 cols, 1 banks, 4 banks/chip, 10.0ns cycle time
spdmem6: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem6: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem7 at iic0 addr 0x57
spdmem7: SDRAM (registered), data ECC, 256MB, 100MHz (PC-100)
spdmem7: 12 rows, 11 cols, 1 banks, 4 banks/chip, 10.0ns cycle time
spdmem7: tAA-tRCD-tRP-tRAS: 3-20-20-50
spdmem7: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
lmenv0 at iic0 addr 0x2e: ADM9240 rev 2
lmenv1 at iic0 addr 0x2f: ADM9240 rev 2
timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
timecounter: Timecounter "PCC" frequency 833120800 Hz quality 1000
scsibus0: waiting 2 seconds for devices to settle...
stray isa irq 14
uhub0 at usb0: vendor 1912 (0x1912) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1912 (0x1912) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
stray isa irq 14
stray isa irq 14
stray isa irq 14
stray isa irq 14; stopped logging
WARNING: module error: sequencer: can't find builtin dependency `midi'
PCC: local cc desynchronized
PCC: local cc desynchronized
PCC: local cc desynchronized
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: SABRENT (0x152d) SABRENT (0x1561), rev 3.00/2.04, addr 1
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, 1 lun per target
umass1 at uhub0 port 2 configuration 1 interface 0
umass1: OWC (0x1e91) Envoy 2012 (0xa1a2), rev 3.00/1.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, 1 lun per target
wd0 at atabus0 drive 0
wd0: <HYPERDISK SSD>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 15104 MB, 32733 cyl, 15 head, 63 sec, 512 bytes/sect x 30932992 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4
sd0 at scsibus1 target 0 lun 0: <SABRENT, , 0204> disk fixed
sd0: fabricating a geometry
sd0: 465 GB, 476940 cyl, 64 head, 32 sec, 512 bytes/sect x 976773168 sectors
sd1 at scsibus2 target 0 lun 0: <Envoy, 2012, 0> disk fixed
sd1: 113 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 236978176 sectors
sd0: fabricating a geometry
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/alpha/8.0/modules