Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-31 02:24:18
From: nullnilaki
Description: dmesg of NetBSD/sgimips current(20181231) on Sgi Indy R5000 180MHz
NetBSD/sgimips 8.99.29 Bootstrap, Revision 1.5 (Sun Dec 30 23:29:22 UTC 2018)
devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file netbsd
4774864+126480 [270368+262134]=0x52f040
[ 1.0000000] phys segment: 0xe000 @ 0x8002000
[ 1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[ 1.0000000] phys segment: 0x730000 @ 0x8010000
[ 1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
[ 1.0000000] adding 0x1b0000 @ 0x8590000 to freelist 0
[ 1.0000000] phys segment: 0xb800000 @ 0x8800000
[ 1.0000000] adding 0xb800000 @ 0x8800000 to freelist 0
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.29 (GENERIC32_IP2x) #0: Sun Dec 30 23:46:24 UTC 2018
[ 1.0000000] naruaki@localhost:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP2x
[ 1.0000000] total memory = 192 MB
[ 1.0000000] (768 KB reserved for ARCS)
[ 1.0000000] avail memory = 182 MB
[ 1.0000000] WARNING: module error: sequencer: can't find builtin dependency `midi'
[ 1.0000000] mainbus0 (root): SGI-IP22 [SGI, 690a5ae7], 1 processor
[ 1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
[ 1.0000000] cpu0: 48 TLB entries, 16MB max page size
[ 1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[ 1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[ 1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 data cache
[ 1.0000000] int0 at mainbus0 addr 0x1fbd9880
[ 1.0000000] int0: bus 90MHz, CPU 180MHz
[ 1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
[ 1.0000000] gio0 at imc0
[ 1.0000000] newport0 at gio0: SGI NG1 (board revision 2, cmap revision 5, xmap revision 5, vc2 revision 0), depth 8
[ 1.0000000] wsdisplay0 at newport0 kbdmux 1
[ 1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
[ 1.0000000] zsc0 at hpc0 offset 0x59830
[ 1.0000000] zstty0 at zsc0 channel 1 (console i/o)
[ 1.0000000] zstty1 at zsc0 channel 0
[ 1.0000000] pckbc0 at hpc0 offset 0x59840
[ 1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
[ 1.0000000] sq0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
[ 1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
[ 1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
[ 1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
[ 1.0000000] audio0 at haltwo0: half duplex, playback, capture, mmap
[ 1.0000000] haltwo0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
[ 1.0000000] haltwo0: Latency: 64 milliseconds
[ 1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] pi1ppc0 at hpc0 offset 0x59800
[ 1.0000000] pi1ppc0: capabilities=0x8<PS2>
[ 1.0000000] ppbus0 at pi1ppc0
[ 1.0000000] ppbus0: No IEEE1284 device found.
[ 1.0000000] lpt0 at ppbus0: port mode = 0x1<COMPATIBLE>
[ 1.0000000] button0 at hpc0 offset 0x59850
[ 1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
[ 1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guinness), board rev 0
[ 1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[ 1.1995359] WARNING: module error: sequencer: can't find builtin dependency `midi'
[ 3.1498362] sd0 at scsibus0 target 1 lun 0: <ATA, TS32GCF133, 2014> disk fixed
[ 3.2397838] sd0: 30535 MB, 15510 cyl, 64 head, 63 sec, 512 bytes/sect x 62537328 sectors
[ 3.3302603] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers, tagged queueing
[ 4.9519608] boot device: sd0
[ 4.9915188] root on sd0a dumps on sd0b
[ 5.0539549] root file system type: ffs
[ 5.0941214] kern.module.path=/stand/sgimips/8.99.29/modules
Mon Dec 31 00:09:03 UTC 2018
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: sq0.
Adding interface aliases:.
add net default: gateway[_IP_XXXXXX]
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Could not open /dev/crypto: Device not configured
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Dec 31 00:09:34 postfix[330]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Mon Dec 31 00:09:37 UTC 2018
NetBSD/sgimips (Amnesiac) (console)