Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-12-31 02:46:13
From: nullnilaki
Description: dmesg of NetBSD/sgimips current(20181231) on Sgi Indigo R4000
NetBSD/sgimips 8.99.29 Bootstrap, Revision 1.5 (Sun Dec 30 23:29:22 UTC 2018)
devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
4774864+126480 [270368+262134]=0x52f040
[ 1.0000000] phys segment: 0xe000 @ 0x8002000
[ 1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[ 1.0000000] phys segment: 0x730000 @ 0x8010000
[ 1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
[ 1.0000000] adding 0x1b0000 @ 0x8590000 to freelist 0
[ 1.0000000] phys segment: 0x7800000 @ 0x8800000
[ 1.0000000] adding 0x7800000 @ 0x8800000 to freelist 0
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.29 (GENERIC32_IP2x) #0: Sun Dec 30 23:46:24 UTC 2018
[ 1.0000000] naruaki@localhost:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP2x
[ 1.0000000] total memory = 128 MB
[ 1.0000000] (768 KB reserved for ARCS)
[ 1.0000000] avail memory = 119 MB
[ 1.0000000] WARNING: module error: sequencer: can't find builtin dependency `midi'
[ 1.0000000] mainbus0 (root): SGI-IP20 [SGI, 69063ecf], 1 processor
[ 1.0000000] cpu0 at mainbus0: MIPS R4000 CPU (0x422) Rev. 2.2 with MIPS R4010 FPC Rev. 0.0
[ 1.0000000] cpu0: 48 TLB entries, 16MB max page size
[ 1.0000000] cpu0: 8KB/16B direct-mapped L1 instruction cache
[ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache
[ 1.0000000] cpu0: 1024KB/128B direct-mapped write-back L2 unified cache
[ 1.0000000] int0 at mainbus0 addr 0x1fb801c0
[ 1.0000000] int0: bus 50MHz, CPU 100MHz
[ 1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
[ 1.0000000] gio0 at imc0
[ 1.0000000] light0 at gio0: SGI LG2 (board revision 3)
[ 1.0000000] wsdisplay0 at light0 kbdmux 1
[ 1.0000000] hpc0 at gio0: SGI HPC1.5 (onboard)
[ 1.0000000] zsc0 at hpc0 offset 0xd10
[ 1.0000000] zstty0 at zsc0 channel 1 (console i/o)
[ 1.0000000] zstty1 at zsc0 channel 0
[ 1.0000000] zsc1 at hpc0 offset 0xd00
[ 1.0000000] zsms0 at zsc1 channel 1: baud rate 4800
[ 1.0000000] wsmouse0 at zsms0 mux 0
[ 1.0000000] zskbd0 at zsc1 channel 0: baud rate 600
[ 1.0000000] wskbd0 at zskbd0 mux 1
[ 1.0000000] sq0 at hpc0 offset 0x100: SGI Seeq 80c03
[ 1.0000000] sq0: Ethernet address xx:xx:xx:xx:xx:xx
[ 1.0000000] wdsc0 at hpc0 offset 0x11f: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
[ 1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
[ 1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
[ 1.0000000] dpclock0 at mainbus0 addr 0x1fb80e00
[ 1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[ 1.3710481] WARNING: module error: sequencer: can't find builtin dependency `midi'
[ 3.1467758] sd0 at scsibus0 target 1 lun 0: <ATA, TS32GCF133, 2014> disk fixed
[ 3.2372083] sd0: 30535 MB, 15510 cyl, 64 head, 63 sec, 512 bytes/sect x 62537328 sectors
[ 4.3379085] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers, tagged queueing
[ 5.9559299] boot device: sd0
[ 5.9969390] root on sd0a dumps on sd0b
[ 6.0598904] root file system type: ffs
[ 6.1019817] kern.module.path=/stand/sgimips/8.99.29/modules
[ 6.1692164] WARNING: preposterous TOD clock time
[ 6.2246405] WARNING: using filesystem time
[ 6.2738081] WARNING: CHECK AND RESET THE DATE!
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: sq0.
Adding interface aliases:.
add net default: gateway xxx.xxx.xxx.xxx
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Could not open /dev/crypto: Device not configured
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Dec 31 00:26:25 postfix[309]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Mon Dec 31 00:26:28 UTC 2018
NetBSD/sgimips (Amnesiac) (console)
login: