Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2018-12-31 20:15:04
From: nullnilaki
Description: NetBSD/sgimips current(20181231) on Sgi Personal IRIS 4D/35
System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.
>> hinv    
           Memory size: 40 Mbytes
Instruction cache size: 64 Kbytes
       Data cache size: 64 Kbytes
             SCSI Disk: dksc(0,4)
         System option: Bit-Plane Expansion
         System option: Z-Buffer
              Graphics: GR1.2
             CPU board: IP12 36 MHZ with Floating Point Unit
>> boot -f bootp()192.168.1.14:/tftpboot/ip12 dksc(0,4,0)/ip12netbsd
Obtaining /tftpboot/ip12 from server[_IP_XXXXXXX]
56704+0+1832 entry: 0x80368000

NetBSD/sgimips 8.99.29 Yet another Bootstrap, Revision 1.0 (Mon Dec 31 16:35:02 UTC 2018)

2883344+84224 [189088+180913]=0x32f3ac
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 8.99.29 (GENERIC32_IP12) #5: Mon Dec 31 17:43:53 UTC 2018
[   1.0000000] 	naruaki@localhost:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP12
[   1.0000000] total memory = 40960 KB
[   1.0000000] (0 reserved for ARCS)
[   1.0000000] avail memory = 36780 KB
[   1.0000000] WARNING: module error: sequencer: can't find builtin dependency `midi'
[   1.0000000] mainbus0 (root): SGI-IP12 [SGI, IP12], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R3000A CPU (0x230) Rev. 3.0 with MIPS R3010 FPC Rev. 4.0
[   1.0000000] cpu0: 64KB/4B direct-mapped Instruction cache, 64 TLB entries
[   1.0000000] cpu0: 64KB/4B direct-mapped write-through Data cache
[   1.0000000] int0 at mainbus0 addr 0x1fb801c0
[   1.0000050] pic0 at mainbus0 addr 0x1fa00000
[   1.0000050] pic0: Revision A: dblk (0x1), iblk (0x8)
[   1.0000050] pic0: Personal Iris 4D/3x, board revision 2
[   1.0000050] pic0: cache disabled, store partial
[   1.0000050] gio0 at pic0
[   1.0000050] hpc0 at gio0: SGI HPC1 (onboard)
[   1.0000050] zsc0 at hpc0 offset 0xd10
[   1.0000050] zstty0 at zsc0 channel 1 (console i/o)
[   1.0000050] zstty1 at zsc0 channel 0
[   1.0000050] zsc1 at hpc0 offset 0xd00
[   1.0000050] zsms0 at zsc1 channel 1: baud rate 4800
[   1.0000050] wsmouse0 at zsms0 mux 0
[   1.0000050] zskbd0 at zsc1 channel 0: baud rate 600
[   1.0000050] wskbd0 at zskbd0 mux 1
[   1.0000050] sq0 at hpc0 offset 0x100: SGI Seeq 8003
[   1.0000050] sq0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000050] wdsc0 at hpc0 offset 0x11f: WD33C93A (20.0 MHz clock, BURST DMA, SCSI ID 0)
[   1.0000050] scsibus0 at wdsc0: 8 targets, 8 luns per target
[   1.0000050] dpclock0 at mainbus0 addr 0x1fb80e00
[   1.5953010] scsibus0: waiting 2 seconds for devices to settle...
[   2.1353650] WARNING: module error: sequencer: can't find builtin dependency `midi'
[   4.4052930] sd0 at scsibus0 target 4 lun 0: <IBM, DORS-32160, WA6A> disk fixed
[   4.5652930] sd0: 2015 MB, 6703 cyl, 5 head, 123 sec, 512 bytes/sect x 4127761 sectors
[   4.6653010] sd0: async, 8-bit transfers
[   5.4753330] boot device: <unknown>
[   5.5125330] root device: 
[   6.2263170] use one of: sq0 sd0[a-p] halt reboot
[   6.2789330] root device: sd0
[   8.3077570] dump device (default sd0b): 
[   9.3194610] file system (default generic): 
[   9.5980210] root on sd0a dumps on sd0b
[   9.7699890] root file system type: ffs
[   9.8399810] kern.module.path=/stand/sgimips/8.99.29/modules
[   9.9024450] WARNING: preposterous TOD clock time
[   9.9579010] WARNING: using filesystem time
[  10.0072050] WARNING: CHECK AND RESET THE DATE!
[  10.0999890] init path (default /sbin/init): 
[  10.7461010] init: trying /sbin/init
Sun Dec 30 21:58:18 UTC 2018
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
Starting network.
/etc/rc: WARNING: $hostname not set.
Configuring network interfaces: sq0.
Adding interface aliases:.
add net default: gateway[_IP_XXXXXX]
Waiting for DAD to complete for statically configured addresses...


                           Starting up the system...

               To perform system maintenance instead, press <Esc>

Error: boot device not responding.
Unable to boot; press any key to continue: 


System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option?