Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-01-14 16:56:10
From: youri
Description: HP Z200 Workstation Intel Dual Core i5 3.33GHz
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 4983 MB
avail memory = 4815 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Z200 Workstation ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000E5210 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DF7D0CE8 000064 (v01 HPQOEM SLIC-WKS 20101118 00000000)
ACPI: FACP 0x00000000DF7D0E88 0000F4 (v03 HPQOEM IBEXPEAK 00000001 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20170303/tbfadt-642)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x000000000000F850/0x0 (20170303/tbfadt-693)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-642)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20170303/tbfadt-745)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170303/tbfadt-745)
ACPI: DSDT 0x00000000DF7D1377 00A36D (v01 HPQOEM DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000DF7D0C00 000040
ACPI: FACS 0x00000000DF7D0C00 000040
ACPI: APIC 0x00000000DF7D0F7C 0000BC (v01 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: ASF! 0x00000000DF7D1038 000063 (v32 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: MCFG 0x00000000DF7D109B 00003C (v01 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: TCPA 0x00000000DF7D10D7 000032 (v01 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: SLIC 0x00000000DF7D1109 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 0x00000000DF7D127F 000038 (v01 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: DMAR 0x00000000DF7D12B7 000080 (v01 HPQOEM IBEXPEAK 00000001 00000000)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz, id 0x20655
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 4
cpu1: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz, id 0x20655
cpu1: package 0, core 2, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <HPQOEM,SLIC-WKS,20101118>, AslId < ,00000000>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f4000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810004C808 0003BA (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810004C408 0003D8 (v01 HPQOEM CST 00000001 MSFT 0100000E)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
APIC (PNP0003) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD3 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0040 (rev. 0x02)
agp0 at pchb0: can't find internal VGA config space
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 5 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x2180, interrupting at ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH LAN (82578DM) Controller (rev. 0x05)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
atphy0 at wm0 phy 2: Atheros AR8021 10/100/1000 PHY, rev. 2
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
wm0: wm_gmii_setup_phytype: unknown PHY model
wm0: Previously assumed PHY type(10)was incorrect. PHY type from PHY ID = 0
wm0: Previously assumed PHY type(10)was incorrect. New PHY type = 0
wm0: PHY type is still unknown.
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 20
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0262
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: DAC03 2ch: HP Out [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
ppb0 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x05)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 24
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 68a9 (rev. 0x00)
hdaudio1 at pci1 dev 0 function 1: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdafg1 at hdaudio1: vendor 1002 product aa01
hdafg1: HDMI00 2ch: Digital Out [Jack]
hdafg1: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 28 function 4: vendor 8086 product 3b4a (rev. 0x05)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 36
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 6: vendor 8086 product 3b4e (rev. 0x05)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 48
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xa5)
pci4 at ppb3 bus 16
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 2 function 0: vendor 104c product 8024 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 22
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:8d:57
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b16 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2822 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe720ff05<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 17 us, pow 500 mW
acpicpu0: C3: FFH, lat 50 us, pow 100 mW
acpicpu0: P0: FFH, lat 10 us, pow 73 mW, 3466 MHz
acpicpu0: P1: FFH, lat 10 us, pow 73 mW, 3333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 56 mW, 2533 MHz
acpicpu0: P3: FFH, lat 10 us, pow 43 mW, 1866 MHz
acpicpu0: P4: FFH, lat 10 us, pow 32 mW, 1199 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3333530280 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: PHY offline
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
ahcisata0 port 4: PHY offline
ahcisata0 port 5: PHY offline
wd0 at atabus0 drive 0
wd0: <ST1000DX001-1NS162>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 8 ports with 8 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub4 at uhub2 port 1: vendor 0409 (0x409) product 005a (0x5a), class 9/0, rev 2.00/1.00, addr 3
uhub4: single transaction translator
uhub4: 3 ports with 2 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 3, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 1 configuration 1 interface 2
uhidev2: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 3, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub4 port 1 configuration 1 interface 0
uhidev3: Topre Corporation (0x853) HHKB Professional (0x100), rev 1.10/1.02, addr 4, iclass 3/1
ukbd1 at uhidev3
wskbd2 at ukbd1 mux 1
umass0 at uhub2 port 6 configuration 1 interface 0
umass0: Generic (0xbda) USB2.0-CRW (0x181), rev 2.00/81.97, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 5 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.00> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic-, SM/xD-Picture, 1.00> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic-, SD/MMC, 1.00> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro/HG, 1.00> disk removable
sd3: drive offline
sd4 at scsibus0 target 0 lun 4: <Generic-, SD/MMC/MS/MSPRO, 1.00> disk removable
sd4: drive offline
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 9 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
drm: initializing kernel modesetting (JUNIPER 0x1002:0x68A9 0x103C:0x2306).
drm: register mmio base: 0xf0000000
drm: register mmio size: 131072
drm kern info: ATOM BIOS: JUNIPER
radeon0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon0: info: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
drm: Detected VRAM RAM=400M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 1485918 kiB
Zone dma32: Available graphics memory: 2097152 kiB
drm: radeon: 1024M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading JUNIPER Microcode
WARNING: clock lost 364 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
drm: Internal thermal controller with fan control
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff800077d44c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff800077d44c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff800077d7c418
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: DP-1
drm: HPD4
drm: DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY2
drm: Connector 1:
drm: DP-2
drm: HPD5
drm: DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm: Encoders:
drm: DFP2: INTERNAL_UNIPHY2
drm: Connector 2:
drm: DVI-I-1
drm: HPD1
drm: DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
drm: Encoders:
drm: DFP3: INTERNAL_UNIPHY1
drm: CRT2: INTERNAL_KLDSCP_DAC2
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80007839d000, size 2560x1440, depth 32, stride 10240
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)