Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-01-15 13:11:52
From: coypu
Description: Dell Inspiron n4030 (non original wifi)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.30 (GENERIC) #0: Thu Jan 10 15:02:02 IST 2019
	fly@planets:/home/fly/obj2/sys/arch/amd64/compile/GENERIC
total memory = 3958 MB
avail memory = 3818 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron N4030 (A07)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL  )
ACPI: XSDT 0x00000000BF5F0088 00005C (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: FACP 0x00000000BF5F96B0 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
ACPI: DSDT 0x00000000BF5F0170 009540 (v02 DELL   WN09     00000030 INTL 20051117)
ACPI: FACS 0x00000000BF62DF40 000040
ACPI: FACS 0x00000000BF62DF80 000040
ACPI: APIC 0x00000000BF5F97A8 000072 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: SSDT 0x00000000BF5F9820 00014E (v01 AMICPU PROC     00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BF5F9970 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
ACPI: SLIC 0x00000000BF5F99B0 000176 (v01 DELL   WN09     01072009 AMI  00010013)
ACPI: HPET 0x00000000BF5F9B28 000038 (v01 DELL   WN09     01072009 AMI. 00000003)
ACPI: OSFR 0x00000000BF5F9B60 00008C (v01 DELL   M08      07DB0317 ASL  00000061)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 4
cpu1: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu1: package 0, core 2, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 5
cpu3: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz, id 0x20655
cpu3: package 0, core 2, smt 1
acpi0 at mainbus0: Intel ACPICA 20181213
acpi0: X/RSDT: OemId <DELL  , WN09   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDDFB5AB3A810 0003A4 (v01 AMI    IST      00000001 MSFT 03000001)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (PEGP): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: [6,12,18,24,30,36,42,48,54,60,66,72,78,84,90,100]
acpiout2 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0:   0x0210 (acpiout2): Unknown Output Device, head 0, bios detect
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2, DLL0466) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
PCH (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 87.0 C, passive cooling
OMSC (PNP0C02) at acpi0 not configured
ACPI: Enabled 5 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: autoconfiguration error: Failed to initialize an ALPS device.
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0044 (rev. 0x02)
agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0045 (rev. 0x02)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 68e1 (rev. 0x00)
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 111d product 7605
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x05)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 17
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 3b44 (rev. 0x05)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 18
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 0032 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2: vendor 8086 product 3b46 (rev. 0x05)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 19
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci4 dev 0 function 0: Atheros AR8132 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 18
alc0: Ethernet address xx:xx:xx:xx:xx:xx
atphy0 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb4 at pci0 dev 28 function 4: vendor 8086 product 3b4a (rev. 0x05)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xa5)
pci6 at ppb5 bus 32
pci6: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b0b (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3b2f (rev. 0x05)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xf720ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 205 us, pow   500 mW
acpicpu0: C3: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow  3125 mW, 2394 MHz
acpicpu0: P1: FFH, lat  10 us, pow  2625 mW, 2261 MHz
acpicpu0: P2: FFH, lat  10 us, pow  2125 mW, 2128 MHz
acpicpu0: P3: FFH, lat  10 us, pow  1750 mW, 1995 MHz
acpicpu0: P4: FFH, lat  10 us, pow  1375 mW, 1862 MHz
acpicpu0: P5: FFH, lat  10 us, pow  1125 mW, 1729 MHz
acpicpu0: P6: FFH, lat  10 us, pow   875 mW, 1596 MHz
acpicpu0: P7: FFH, lat  10 us, pow   625 mW, 1463 MHz
acpicpu0: P8: FFH, lat  10 us, pow   500 mW, 1330 MHz
acpicpu0: P9: FFH, lat  10 us, pow   125 mW,  931 MHz
acpicpu0: T0: FFH, lat   1 us, pow  1000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   875 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow   750 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow   625 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow   500 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow   375 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow   250 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow   125 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2400082440 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <TOSHIBA Q300>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
bwfm0 at uhub3 port 1: Broadcom (0xa5c) Remote Download Wireless Adapter (0xbd1e), rev 2.00/0.01, addr 3
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Generic (0xbda) USB2.0-CRW (0x138), rev 2.00/38.82, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB-PS/2 Optical Mouse (0xc051), rev 2.00/30.00, addr 4, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub2 port 4 configuration 1 interface 0: Sony Visual Communication Came (0xc45) Laptop_Integrated_Webcam_0.3M (0x6452), rev 2.00/9b.25, addr 4
video0 at uvideo0: Sony Visual Communication Came (0xc45) Laptop_Integrated_Webcam_0.3M (0x6452), rev 2.00/9b.25, addr 4
uhidev1 at uhub3 port 4 configuration 1 interface 0
uhidev1: KINESIS FREESTYLE KB800 (0x58f) KB800 Kinesis Freestyle (0x9410), rev 1.10/1.22, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 Variable keys, 6 Array codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub3 port 4 configuration 1 interface 1
uhidev2: KINESIS FREESTYLE KB800 (0x58f) KB800 Kinesis Freestyle (0x9410), rev 1.10/1.22, addr 5, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
ubt0 at uhub3 port 6
ubt0: Atheros Communications (0xcf3) Bluetooth USB Host Controller (0x3004), rev 1.10/0.01, addr 6
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.30/modules
kern info: [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1028:0x0466).
kern info: [drm] register mmio base: 0xfbe20000
kern info: [drm] register mmio size: 131072
kern info: ATOM BIOS: Dell
radeon0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon0: info: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
kern info: [drm] Detected VRAM RAM=200M, BAR=256M
kern info: [drm] RAM width 64bits DDR
Zone  kernel: Available graphics memory: 1112364 kiB
kern info: [drm] radeon: 512M of VRAM memory ready
kern info: [drm] radeon: 1024M of GTT memory ready.
kern info: [drm] Loading CEDAR Microcode
kern info: [drm] Internal thermal controller with fan control
kern info: [drm] radeon: dpm initialized
kern info: [drm] GART: num cpu pages 262144, num gpu pages 262144
kern info: [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xffffddfb5d61ac00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xffffddfb5d61ac0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff8680671ac418
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
radeon0: info: radeon: MSI limited to 32-bit
radeon0: interrupting at ioapic0 pin 16 (radeon0)
kern info: [drm] radeon: irq initialized.
kern info: [drm] ring test on 0 succeeded in 1 usecs
kern info: [drm] ring test on 3 succeeded in 2 usecs
kern info: [drm] ring test on 5 succeeded in 1 usecs
kern info: [drm] UVD initialized successfully.
kern info: [drm] ib test on ring 0 succeeded in 0 usecs
kern info: [drm] ib test on ring 3 succeeded in 0 usecs
bwfm0: firmware loaded
bwfm0: wl0: Apr  3 2014 04:43:32 version xxx.xxx.xxx.xxx (r467479) FWID 01-32bd010e
bwfm0: address xx:xx:xx:xx:xx:xx
bwfm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwfm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
kern info: [drm] ib test on ring 5 succeeded
kern info: [drm] Radeon Display Connectors
kern info: [drm] Connector 0:
kern info: [drm]   LVDS-1
kern info: [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
kern info: [drm]   Encoders:
kern info: [drm]     LCD1: INTERNAL_UNIPHY
kern info: [drm] Connector 1:
kern info: [drm]   VGA-1
kern info: [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
kern info: [drm]   Encoders:
kern info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeondrmkmsfb0: framebuffer at 0xffff8680678aa000, size 1440x900, depth 32, stride 5888
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
Disabling SVS... done!
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)