Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-02-08 03:41:44
From: pfg
Description: Dell Optiplex 760
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-STABLE r343814 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (2493.80-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 6442450944 (6144 MB) avail memory = 6051397632 (5771 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <DELL B10K > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20181213/tbfadt-748) ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 3 1 2 Timecounter "TSC-low" frequency 1246900845 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4184] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810fba30, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL B10K > on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 2c00001 vs 2c00000 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xe0000000-0xefffffff,0xf7df0000-0xf7dfffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <Intel ATA controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 uart2: <4 Series Chipset Serial KT Controller> port 0xecb8-0xecbf mem 0xf7fda000-0xf7fdafff irq 17 at device 3.3 on pci0 uart2: Using 1 MSI message em0: <Intel(R) PRO/1000 Network Connection> port 0xece0-0xecff mem 0xf7fe0000-0xf7ffffff,0xf7fdb000-0xf7fdbfff irq 21 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 22 at device 26.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7fd9c00-0xf7fd9fff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801JD HDA Controller> mem 0xf7fdc000-0xf7fdffff irq 16 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: [GIANT-LOCKED] ACPI Warning: \134_SB.PCI0.PCI2._PRT: Return Package has no elements (empty) (20181213/nsprepkg-251) pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib3: [GIANT-LOCKED] uhci3: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff980000-0xff9803ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd17ff,0xd1800-0xd3fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 Timecounters tick every 1.000 msec hdacc0: <Analog Devices AD1984A HDA CODEC> at cad 2 on hdac0 hdaa0: <Analog Devices AD1984A Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1984A (Analog)> at nid 18 and 20 on hdaa0 pcm1: <Analog Devices AD1984A (Analog)> at nid 17 and 21 on hdaa0 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen7.1: <Intel EHCI root HUB> at usbus7 ugen1.1: <Intel UHCI root HUB> at usbus1 ugen6.1: <Intel UHCI root HUB> at usbus6 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen3.1: <Intel EHCI root HUB> at usbus3 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus2 target 0 lun 0 ada0: <WDC WD30EZRX-00D8PB0 80.00A80> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2861588MB (5860533168 512 byte sectors) ada0: quirks=0x1<4K> cd0 at ahcich1 bus 0 scbus3 target 0 lun 0 cd0: <HL-DT-ST DVD+-RW GT10N A102> Removable CD-ROM SCSI device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from ufs:/dev/ada0s3a [rw]... uhub6: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen3.2: <KYE SYSTEMS CORP. iSlim 1300 V2> at usbus3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.2: <Dell Dell USB Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 2> on usbus0 kbd2 at ukbd0 lo0: link state changed to UP em0: link state changed to UP CPU: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (2493.80-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics