Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-02-08 12:48:51
From: redbrick
Description: NetBSD/i386 8.0 (GENERIC) on Sharp PC-CW60X(AMD Mobile Sempron Processer)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 3070 MB
avail memory = 3000 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SHARP Corporation PC-CW2 Series (Rev 1)
mainbus0 (root)
ACPI: RSDP 0x00000000000F81B0 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFE7FA26 000064 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFE869F6 0000F4 (v03 SHARP YAMATO 06040000 ATI 000F4240)
ACPI: DSDT 0x00000000BFE7FA8A 006F6C (v01 SHARP YAMATO 06040000 MSFT 0100000E)
ACPI: FACS 0x00000000BFE88FC0 000040
ACPI: FACS 0x00000000BFE88FC0 000040
ACPI: TCPA 0x00000000BFE86B5E 000032 (v02 SHARP YAMATO 06040000 PTEC 00000000)
ACPI: ASF! 0x00000000BFE86B90 00012B (v32 SHARP YAMATO 06040000 PTL 00000001)
ACPI: APIC 0x00000000BFE86CBB 000046 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: MCFG 0x00000000BFE86D01 00003C (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: HPET 0x00000000BFE86D3D 000038 (v01 SHARP YAMATO 06040000 LTP 00000001)
ACPI: SLIC 0x00000000BFE86D75 000176 (v01 SHARP YAMATO 06040000 LTP 00000000)
ACPI: SSDT 0x00000000BFE86EEB 000115 (v01 SHARP YAMATO 06040000 LTP 00000001)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Mobile AMD Sempron(tm) Processor 3600+, id 0x70fc2
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <SHARP ,YAMATO ,06040000>, AslId < LTP,00000000>
mpacpi: PCI bus 2 int routing already done!
mpacpi: PCI bus 4 int routing already done!
acpi0: MCFG: segment 0, bus 0-7, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: SHARP rechargeable battery
acpibat0: granularity: low->warn 0.064 Ah, warn->full 0.064 Ah
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MEMR (PNP0C02) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC0, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, SYN0F05) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [6,20,30,46,56,72,82,100]
acpiout1 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpifan0 at acpi0 (FAN, PNP0C0B-1): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 60.0C
acpitz0: levels: critical 105.0 C, passive 95.0 C
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1002 product 7910 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 1002 product 7912 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
radeon0 at pci1 dev 5 function 0: vendor 1002 product 791f (rev. 0x00)
radeon0: unable to reserve VGA registers for i386 radeondrmkms hack
ppb1 at pci0 dev 4 function 0: vendor 1002 product 7914 (rev. 0x00)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x01)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 5 function 0: vendor 1002 product 7915 (rev. 0x00)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 5424/2424
ath0: interrupting at ioapic0 pin 17
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 14.2 phy 7.0 radio 10.2
ixpide0 at pci0 dev 18 function 0: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ohci0 at pci0 dev 19 function 0: vendor 1002 product 4387 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 1002 product 4388 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 17
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ohci2 at pci0 dev 19 function 2: vendor 1002 product 4389 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 3: vendor 1002 product 438a (rev. 0x00)
ohci3: interrupting at ioapic0 pin 17
ohci3: OHCI version 1.0, legacy support
usb3 at ohci3: USB revision 1.0
ohci4 at pci0 dev 19 function 4: vendor 1002 product 438b (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb4 at ohci4: USB revision 1.0
ehci0 at pci0 dev 19 function 5: vendor 1002 product 4386 (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 5 companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
usb5 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x14)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at ioapic0 pin 14
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at ixpide1 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 10ec product 0262
hdafg0: duplicate pin in association
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
pcib0 at pci0 dev 20 function 3: vendor 1002 product 438d (rev. 0x00)
ppb3 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x00)
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 7 function 0: vendor 1180 product 0476 (rev. 0xb4)
fwohci0 at pci4 dev 7 function 1: vendor 1180 product 0552 (rev. 0x09)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:3d:1d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci4 dev 7 function 2: vendor 1180 product 0822 (rev. 0x18)
sdhc0: interrupting at ioapic0 pin 22
sdhc0: SDHC 1.0, rev 2, SDMA, 33000 kHz, 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product 0843 (miscellaneous system) at pci4 dev 7 function 3 not configured
vendor 1180 product 0592 (miscellaneous system, revision 0x09) at pci4 dev 7 function 4 not configured
vendor 1180 product 0852 (miscellaneous system, revision 0x04) at pci4 dev 7 function 5 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 20
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
pchb1 at pci0 dev 24 function 0: vendor 1022 product 1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 1022 product 1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 1022 product 1102 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev DH-G2, socket S1)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 100 us, pow 25000 mW, 2000 MHz
acpicpu0: P1: FFH, lat 100 us, pow 21532 mW, 1800 MHz
acpicpu0: P2: FFH, lat 100 us, pow 18298 mW, 1600 MHz
acpicpu0: P3: FFH, lat 100 us, pow 6824 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 1002 (0x1002) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 1002 (0x1002) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
ugen0 at uhub1 port 1
ugen0: PIXELA CORPORATION (0x6b8) PIX-ST130 (0x101f), rev 2.00/1.00, addr 2
wd0 at atabus0 drive 0
wd0: <Hitachi HTS723232L9SA60>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ870PC, SD79 064045, 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/1
ukbd0 at uhidev0
root file system type: ffs
kern.module.path=/stand/i386/8.0/modules
drm: initializing kernel modesetting (RS690 0x1002:0x791F 0x13BD:0x1054).
drm: register mmio base: 0xf0100000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: ATI
radeon0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: Detected VRAM RAM=100M, BAR=256M
drm: RAM width 128bits DDR
Zone kernel: Available graphics memory: 1300616 kiB
drm: radeon: 256M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: radeon: 1 quad pipes, 1 z pipes initialized.
drm: PCIE GART of 512M enabled (table at 0x0000000043634000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0x0xdcd0c000
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: Loading RS690/RS740 Microcode
drm: radeon: ring at 0x00000000A0001000
DRM error in r100_ring_test: radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD)
DRM error in r100_cp_init: radeon: cp isn't working (-22).
radeon0: error: failed initializing CP (-22).
radeon0: error: Disabling GPU acceleration
DRM error in r100_cp_fini: Wait for CP idle timeout, shutting down CP.
drm kern warning: Failed to wait GUI idle while programming pipes. Bad things might happen.
drm: radeon: cp finalized
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm: LVDS-1
drm: DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
drm: Encoders:
drm: LCD1: INTERNAL_LVTM1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xdcd30000, size 1280x800, depth 32, stride 5120
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub2 port 2 configuration 1 interface 2
uhidev2: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.01, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)