Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-02-17 20:46:29
From: Sevan / Venture37
Description: iMac G5 1.9Ghz, PowerMac12,1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.34 (POWERMAC_G5) #2: Sun Feb 17 20:25:22 GMT 2019 :/usr/obj/macppc/sys/arch/macppc/compile/POWERMAC_G5 total memory = 1536 MB oea_startup: failed to allocate DEAD ZONE: error=12 avail memory = 1461 MB timecounter: Timecounters tick every 10.000 msec found U3/U4 HT PIC at f8040000 OpenPIC Version 1.2: Supports 4 CPUs and 124 interrupt sources. bootpath: /ht@0,f2000000/pci@1/ethernet@f:10.1.1.254,\powermacg5v mainbus0 (root) cpu0 at mainbus0: 970FX (Revision 3.1), ID 0 (primary) cpu0: HID0 0x513081<NAP,DPM,NHR,TBCTRL,EXTBEN,ENATTN> 0x80000000<EMCP>, powersave: 1 memory0 at mainbus0: len=256 spdmem0 at memory0 spdmem0: DDR2 SDRAM, no parity or ECC, 1GB, 667MHz (PC2-5300) spdmem0: 14 rows, 10 cols, 1 ranks, 8 banks/chip, 3.00ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15 spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 ki2c0 at uni_n0 address 0xf8001000 iic0 at ki2c0: I2C bus temp-monitor at iic0 addr 0xc8 not configured temp-monitor at iic0 addr 0xc9 not configured admtemp0 at iic0 addr 0xcc: MAX6690 temperature sensor: id. 0x4d, rev. 0x09 admtemp1 at iic0 addr 0xce: MAX6690 temperature sensor: id. 0x4d, rev. 0x09 dart at uni_n0 address 0xf8033000 not configured mpic at uni_n0 address 0xf8040000 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 4 pci0: i/o space, memory space enabled genfb0 at pci0 dev 0 function 0: vendor 1002 product 5b62 (rev. 0x00) genfb0: framebuffer at 0x98008000, size 1440x900, depth 8, stride 1536 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at genfb0 not configured ibmcpc0 at mainbus0 Mapping in config space @ pa 0xf2000000, size: 0x02800000 pci1 at ibmcpc0 bus 3 pci1: i/o space, memory space enabled gem0 at pci1 dev 15 function 0: vendor 106b product 0051 (rev. 0x00) gem0: interrupting at irq 40 brgphy0 at gem0 phy 0: BCM5462 1000BASE-T media interface, rev. 3 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto gem0: Ethernet address 00:14:51:, 10KB RX fifo, 4KB TX fifo pci2 at ibmcpc0 bus 1 pci2: i/o space, memory space enabled vendor 14e4 product 4318 (miscellaneous network, revision 0x02) at pci2 dev 1 function 0 not configured obio0 at pci2 dev 7 function 0: addr 0x80000000 mpic at obio0 offset 0x40000 not configured zsc0 at obio0 irq 23,24 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 ki2c1 at obio0 iic1 at ki2c1: I2C bus deq0 at iic1 addr 0x46 Audio Codec (pcm3052) i2s at obio0 offset 0x0 not configured ohci0 at pci2 dev 11 function 0: vendor 1033 product 0035 (rev. 0x43) ohci0: interrupting at irq 70 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci1 at pci2 dev 11 function 1: vendor 1033 product 0035 (rev. 0x43) ohci1: interrupting at irq 70 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 ehci0 at pci2 dev 11 function 2: vendor 1033 product 00e0 (rev. 0x04) ehci0: interrupting at irq 70 ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 pci3 at ibmcpc0 bus 2 pci3: i/o space, memory space enabled svwsata0 at pci3 dev 12 function 0: ServerWorks K2 SATA Controller (rev. 0x00) svwsata0: bus-master DMA support present svwsata0: using irq 10 for native-PCI interrupt svwsata0: primary channel wired to native-PCI mode atabus0 at svwsata0 channel 0 svwsata0: secondary channel wired to native-PCI mode atabus1 at svwsata0 channel 1 svwsata0: secondary channel wired to compatibility mode atabus2 at svwsata0 channel 2 svwsata0: secondary channel configured to compatibility mode atabus3 at svwsata0 channel 3 wdc0 at pci3 dev 13 function 0: interrupting at irq 38 atabus4 at wdc0 channel 0 vendor 106b product 0052 (IEEE1394 serial bus, OpenHCI) at pci3 dev 14 function 0 not configured smu0 at mainbus0 mbox 0x860c gpio 0x62 irq 53smuiic0 at smu0 iic2 at smuiic0: I2C bus temp-monitor at iic2 addr 0x4a not configured system-clock at iic2 addr 0x6a not configured smuiic1 at smu0 iic3 at smuiic1: I2C bus using 1 fans for CPU zone using 0 fans for drive bay zone using 0 fans for expansion slots zone vmmask 7f000000 schedmask 7f000000 highmask 7f000000 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100 uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 5 ports with 5 removable, self powered WARNING: module error: built-in module compat_43 can't find builtin dependency `compat_60' WARNING: module error: built-in module compat_43 prerequisite compat_60 failed, error 2 svwsata0 port 0: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 wd0: <Maxtor 6L160M0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 152 GB, 317632 cyl, 16 head, 63 sec, 512 bytes/sect x 320173056 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) wd0(svwsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT ehci0: handing over low speed device on port 2 to ohci0 ehci0: handing over low speed device on port 3 to ohci0 svwsata0 port 1: PHY offline atapibus0 at atabus4: 2 targets cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-846, , FA0G> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA) ehci0: handing over full speed device on port 4 to ohci1 uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Logitech (0x46d) Optical USB Mouse (0xc016), rev 2.00/3.40, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 2 configuration 1 interface 0 uhidev1: Microsoft (0x45e) MicrosoftM-BM-. Digital Media Keyboard (0xb4), rev 2.00/1.43, addr 2, iclass 3/1 ukbd0 at uhidev1: 8 Variable keys, 6 Array codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub0 port 2 configuration 1 interface 1 uhidev2: Microsoft (0x45e) MicrosoftM-BM-. Digital Media Keyboard (0xb4), rev 2.00/1.43, addr 2, iclass 3/0 uhidev2: 3 report ids uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0 uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0 uhub3 at uhub2 port 5: SMSC (0x424) product 2503 (0x2503), class 9/0, rev 2.00/0.01, addr 2 uhub3: multiple transaction translators uhub3: 3 ports with 0 removable, self powered uhub3: autoconfiguration error: device problem, disabling port 2 Apple Computer (0x5ac) Bluetooth (0x8300), class 255/255, rev 2.00/0.0a, addr 3, uhub3 port 3 not configured WARNING: 1 error while detecting hardware; check system log. boot device: gem0 root on gem0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server:[_IP_XXXXX] nfs_boot: my_domain=example.org nfs_boot: my_addr=10.1.1.5 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=10.1.1.254 root on[_IP_XXXXX]:/export/macppc root file system type: nfs kern.module.path=/stand/macppc/8.99.34/modules WARNING: clock gained 40494 days Kernel RNG "kernel" monobit test FAILURE: 9714 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found cprng kernel: failed statistical RNG test admtemp0: critical under limit on 'NB Ambient' admtemp0: critical under limit on 'NB Temp' admtemp1: critical under limit on 'GPU Ambient' admtemp1: critical under limit on 'GPU Temp'