Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-02-23 22:06:40
From: nullnilaki
Description: NetBSD/sparc64(8.0) on Sun Ultra 25
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Sat Feb 23 21:48:43 UTC 2019
	naruaki@localhost:/usr/obj.sparc64/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 987 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root): SUNW,Ultra-25 (Sun Ultra 25 Workstation): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1336 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 34
cpu0: system tick frequency 20 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: pci0 at pyro0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x2 @ 2.5GT/s
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ivec 780
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ivec 780
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ohci2 at pci3 dev 28 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ivec 780
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ivec 781
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
Acer Labs M5455 AC-Link Controller Audio Device (audio multimedia, revision 0x21) at pci3 dev 29 function 0 not configured
alipm0 at pci3 dev 30 function 1alipm0: can't map I/O space
aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f84 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x2 @ 2.5GT/s
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled
ppb4 at pci4 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb3)
ppb4: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci5 at ppb4 bus 7
pci5: i/o space, memory space enabled
bge0 at pci5 dev 4 function 0: Broadcom BCM5715 Gigabit Ethernet
bge0: interrupting at ivec 3796
bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000
bge0: ASIC BCM5715 A1 (0x9001), Ethernet address [_MAC_XXXXXXXXXX]
bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci5 dev 4 function 1: Broadcom BCM5715 Gigabit Ethernet
bge1: interrupting at ivec 3797
bge1: HW config 00010014, 00000014, 00000000, 00000000 00000000
bge1: ASIC BCM5715 A1 (0x9001), Ethernet address [_MAC_XXXXXXXXXX]
bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci1 dev 3 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
pci6 at ppb5 bus 8
pci6: i/o space, memory space enabled
ppb6 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
pci7 at ppb6 bus 9
pci7: i/o space, memory space enabled
ppb7 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xbb)
ppb7: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
pci8 at ppb7 bus 10
pci8: i/o space, memory space enabled
ppb8 at pci8 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09)
ppb8: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci9 at ppb8 bus 11
pci9: i/o space, memory space enabled
mpt0 at pci9 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02)
mpt0: interrupting at ivec 1f8f
mpt0: Phy 0: Link Status Unknown
mpt0: Phy 0: Link Status Unknown
scsibus0 at mpt0: 63 targets, 8 luns per target
ppb9 at pci8 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09)
ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci10 at ppb9 bus 12
pci10: i/o space, memory space enabled
mpt1 at pci10 dev 2 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt1: interrupting at ivec 1f90
scsibus1 at mpt1: 16 targets, 8 luns per target
mpt2 at pci10 dev 2 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt2: interrupting at ivec 1f91
scsibus2 at mpt2: 16 targets, 8 luns per target
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 2
pyro1: pci11 at pyro1
pci11: i/o space, memory space enabled
genfb0 at pci11 dev 0 function 0: 3D Labs product 0032 (rev. 0x01)
ebus0 at mainbus0
flashprom at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: mc146818 compatible time-of-day clock: 
com0 at ebus0 addr 80-87 ipl 7c8: ns16550a, working fifo
com0: console
com1 at ebus0 addr 0-7 ipl 7c8: ns16550a, working fifo
env-monitor at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ipl 7c1
iic0 at pcfiic0: I2C bus
gpio at iic0 addr 0x18 not configured
temperature at iic0 addr 0x2b not configured
temperature at iic0 addr 0x48 not configured
temperature at iic0 addr 0x4f not configured
seeprom0 at iic0 addr 0x52: front-io-fru-prom: size 8192
seeprom1 at iic0 addr 0x53: sas-backplane-fru-prom: size 8192
seeprom2 at iic0 addr 0x57: psu-fru-prom: size 256
hardware-monitor at iic0 addr 0x58 not configured
power at ebus0 addr e0-e1 ipl 7c3 not configured
i2c at mainbus0 not configured
i2c at mainbus0 not configured
i2c at mainbus0 not configured
ppm at mainbus0 not configured
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1336000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 20000000 Hz quality 200
No counter-timer -- using %stick at 20MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
uhub0 at usb0: Acer Labs (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: Acer Labs (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: Acer Labs (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: Acer Labs (0x10b9) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-85JS, , F100> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0 at scsibus0 target 0 lun 0: <ATA, HITACHI HDS7216S, AB8A> disk fixed
sd0: 149 GB, 152628 cyl, 16 head, 127 sec, 512 bytes/sect x 312581808 sectors
sd0: tagged queueing
sd1 at scsibus0 target 1 lun 0: <ATA, HITACHI HDS7216S, AB8A> disk fixed
sd1: 149 GB, 152628 cyl, 16 head, 127 sec, 512 bytes/sect x 312581808 sectors
sd1: tagged queueing
uhub4 at uhub3 port 7: vendor 0424 (0x424) product 2502 (0x2502), class 9/0, rev 2.00/0.01, addr 2
uhub4: single transaction translator
uhub4: 2 ports with 2 removable, self powered
WARNING: 3 errors while detecting hardware; check system log.
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/sparc64/8.0/modules
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!