Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-02-27 02:13:31
From: Chain-Q
Description: PowerMac G4 (Gigabit Ethernet), dual PowerPC 7400/450Mhz
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (INSTALL) #0: Tue Jul 17 14:59:51 UTC 2018
	xxx@xxx.xxx:/usr/src/sys/arch/macppc/compile/INSTALL
total memory = 1536 MB
oea_startup: failed to allocate DEAD ZONE: error=12
avail memory = 1481 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f2000000/@d/mac-io@7/ata-4@1f000/disk@0:2/netbsd-INSTALL.gz
mainbus0 (root)
cpu0 at mainbus0: 7400 (Revision 2.9), ID 0 (primary)
cpu0: HID0 0x8094c0a4<EMCP,DOZE,DPM,EIEC,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
cpu0: 450.00 MHz, no-parity 1MB WB L2 cache (PB SRAM) at 2:1 ratio
cpu1 at mainbus0: ID 1
cpu1: processor off-line; multiprocessor support not present in kernel
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 106b product 0020 (rev. 0x00)
genfb0 at pci0 dev 16 function 0found EDID property...
: vendor 1002 product 4966 (rev. 0x01)
genfb0: framebuffer at 0x9c008000, size 640x480, depth 8, stride 768
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 106b product 001f (rev. 0x00)
ppb0 at pci1 dev 13 function 0: vendor 1011 product 0026 (rev. 0x05)
pci2 at ppb0 bus 1
pci2: i/o space, memory space enabled
obio0 at pci2 dev 7 function 0: addr 0x80000000
obio0: enabling KeyLargo internal modem
zsc0 at obio0 irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
pmu0: initializing RTC
pmu0: power-mgt not configured
wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer
atabus1 at wdc1 channel 0
wdc2 at obio0 offset 0x21000 irq 21, level triggered: DMA transfer
atabus2 at wdc2 channel 0
ohci0 at pci2 dev 8 function 0: vendor 106b product 0019 (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci2 dev 9 function 0: vendor 106b product 0019 (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
vendor 104c product 8019 (IEEE1394 serial bus, OpenHCI) at pci2 dev 10 function 0 not configured
uninorth2 at mainbus0
pci3 at uninorth2 bus 0
pci3: i/o space, memory space enabled
pchb2 at pci3 dev 11 function 0
pchb2: vendor 106b product 001e (rev. 0x00)
gem0 at pci3 dev 15 function 0: vendor 106b product 0021 (rev. 0x01)
gem0: interrupting at irq 41
brgphy0 at gem0 phy 0: BCM5400 1000BASE-T media interface, rev. 7
brgphy0: 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gem0: Ethernet address xx:xx:xx:xx:xx:xx, 10KB RX fifo, 4KB TX fifo
vmmask 7fc00000 schedmask 7fc00000 highmask 7fc00000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 24907667 Hz quality 100
uhub0 at usb0: vendor 106b (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 106b (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at uhub0 port 1: Dell (0x413c) Dell USB Keyboard Hub (0x1003), class 9/0, rev 1.10/2.00, addr 2
uhub2: 3 ports with 2 removable, bus powered
wd0 at atabus0 drive 0
wd0: <ST3120022A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3540A, , 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Dell (0x413c) Dell USB Keyboard (0x2010), rev 1.10/2.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: Dell (0x413c) Dell USB Keyboard (0x2010), rev 1.10/2.00, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhidev2 at uhub2 port 3 configuration 1 interface 0
uhidev2: vendor 413c (0x413c) Dell Premium USB Optical Mouse (0x3016), rev 2.00/29.00, addr 4, iclass 3/1
uhid at uhidev2 not configured
boot device: wd0
md0: internal 2560 KB image area
root on md0a dumps on md0b
root file system type: ffs
kern.module.path=/stand/macppc/8.0/modules
WARNING: clock gained 224 days