Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-03-02 13:41:58
From: jmcneill
Description: NetBSD/evbarm 8.99.34 on Hardkernel ODROID-C2
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 8.99.34 (GENERIC64) #30: Sat Mar 2 09:20:26 AST 2019 [ 1.000000] [_EMAIL_XXXXXXXXXXXXX]:/Users/jmcneill/netbsd/cvs-src/sys/arch/evbarm/compile/obj/GENERIC64 [ 1.000000] total memory = 2016 MB [ 1.000000] avail memory = 1951 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Hardkernel ODROID-C2 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus2 at simplebus1 [ 1.000000] simplebus3 at simplebus1 [ 1.000000] simplebus4 at simplebus1 [ 1.000000] simplebus5 at simplebus1 [ 1.000000] simplebus6 at simplebus1 [ 1.000000] simplebus7 at simplebus1 [ 1.000000] simplebus8 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64 [ 1.000000] cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.000000] cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] gic0 at simplebus1: GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (238 valid) [ 1.000000] armgic0: 16 Priorities, 224 SPIs, 6 PPIs, 8 SGIs [ 1.000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xtal) [ 1.000000] syscon0 at simplebus2: System Controller Registers [ 1.000000] syscon1 at simplebus5: System Controller Registers [ 1.000000] syscon2 at simplebus5: System Controller Registers [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: ARM Generic Timer (24000 kHz) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 [ 1.000070] gxbbclkc0 at syscon0: Meson GXBB clock controller [ 1.000070] mesonpinctrl0 at simplebus3: Meson GXBB periphs GPIO [ 1.000070] gpio0 at mesonpinctrl0: 119 pins [ 1.000070] mesonresets0 at simplebus4 [ 1.000070] gxbbaoclkc0 at syscon1: Meson GXBB AO clock controller [ 1.000070] mesonpinctrl1 at simplebus5: Meson GXBB AO GPIO [ 1.000070] mesonpinctrl1: usb-hub-reset GPIOAO_4 set to output (high) [ 1.000070] gpio1 at mesonpinctrl1: 14 pins [ 1.000070] fregulator0 at simplebus0: VCC1V8 [ 1.000070] fregulator1 at simplebus0: TFLASH_VDD [ 1.000070] gregulator0 at simplebus0: TF_IO [ 1.000070] fregulator2 at simplebus0: VCC3V3 [ 1.000070] fregulator3 at simplebus0: USB_OTG_PWR [ 1.000070] mesonuart0 at simplebus5: console [ 1.000070] mesonuart0: interrupting on GIC irq 225 [ 1.000070] mesonusbphy0 at simplebus1: USB2 PHY (host) [ 1.000070] mesonusbphy1 at simplebus1: USB2 PHY (host) [ 1.000070] /scpi at simplebus0 not configured [ 1.000070] /soc/bus@c883c000/mailbox@404 at simplebus2 not configured [ 1.000070] /soc/sram@c8000000 at simplebus1 not configured [ 1.000070] /soc/hdmi-tx@c883a000 at simplebus1 not configured [ 1.000070] awge0 at simplebus1: Gigabit Ethernet Controller [ 1.000070] awge0: interrupting on GIC irq 40 [ 1.000070] awge0: Core version: 00001137 [ 1.000070] awge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000070] awge0: HW feature mask: 100d4f37 [ 1.000070] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface [ 1.000070] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000070] rgephy1 at awge0 phy 7: RTL8211F 1000BASE-T media interface [ 1.000070] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000070] /soc/bus@c1100000/interrupt-controller@9880 at simplebus4 not configured [ 1.000070] /emmc-pwrseq at simplebus0 not configured [ 1.000070] /soc/bus@c8100000/sys-ctrl@0/power-controller-vpu at syscon1 not configured [ 1.000070] /soc/vpu@d0100000 at simplebus1 not configured [ 1.000070] dispcon0 at simplebus0: HDMI connector [ 1.000070] /efuse at simplebus0 not configured [ 1.000070] /soc/bus@c1100000/i2c@8500 at simplebus4 not configured [ 1.000070] /soc/bus@c1100000/adc@8680 at simplebus4 not configured [ 1.000070] /soc/bus@c8100000/cec@100 at simplebus5 not configured [ 1.000070] /soc/bus@c8100000/ir@580 at simplebus5 not configured [ 1.000070] /soc/periphs@c8834000/rng at simplebus3 not configured [ 1.000070] /soc/bus@c8838000/video-lut@48 at simplebus6 not configured [ 1.000070] mesongxmmc0 at simplebus7: eMMC/SD/SDIO controller [ 1.000070] mesongxmmc0: interrupting on GIC irq 249 [ 1.000070] mesongxmmc1 at simplebus7: eMMC/SD/SDIO controller [ 1.000070] mesongxmmc1: interrupting on GIC irq 250 [ 1.000070] /soc/apb@d0000000/gpu@c0000 at simplebus7 not configured [ 1.000070] dwctwo0 at simplebus1mesonusbphy0: autoconfiguration error: WARNING: USB PHY failed to enable ACA detection [ 1.000070] : DesignWare USB2 OTG [ 1.000070] dwctwo0: interrupting on GIC irq 62 [ 1.000070] dwctwo1 at simplebus1: DesignWare USB2 OTG [ 1.000070] dwctwo1: interrupting on GIC irq 63 [ 1.000070] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000070] psci0 at simplebus0: PSCI 0.2 [ 1.000070] gpioleds0 at simplebus0: c2:blue:alive [ 1.000070] /soc/bus@c1100000/watchdog@98d0 at simplebus4 not configured [ 1.000070] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000070] cpu_boot_secondary_processors: writing mbox with 0xe [ 1.000070] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.119052] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.129041] cpu2: Dcache line 64, Icache line 64 [ 1.129041] cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.139041] cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.149041] cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.149041] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.159041] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.169041] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.179042] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.189042] cpu3: Dcache line 64, Icache line 64 [ 1.189042] cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.199042] cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.209042] cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.219042] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.219042] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.229042] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.239043] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.249043] cpu1: Dcache line 64, Icache line 64 [ 1.249043] cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.259043] cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.269043] cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.279043] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.279043] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.289044] cpu_boot_secondary_processors: secondary processors hatched [ 1.303851] sdmmc0 at mesongxmmc0 [ 1.303851] sdmmc1 at mesongxmmc1 [ 1.430328] dwctwo0: Core Release: 3.10a (snpsid=4f54310a) [ 1.430328] usb0 at dwctwo0: USB revision 2.0 [ 1.530330] dwctwo1: Core Release: 3.10a (snpsid=4f54310a) [ 1.530330] usb1 at dwctwo1: USB revision 2.0 [ 1.530330] armpmu0: interrupting on GIC irq 169 [ 1.530330] armpmu0: interrupting on GIC irq 170 [ 1.530330] armpmu0: interrupting on GIC irq 185 [ 1.540330] armpmu0: interrupting on GIC irq 186 [ 1.640332] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.650347] uhub0: 1 port with 1 removable, self powered [ 1.650347] uhub1 at usb1: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.660334] uhub1: 1 port with 1 removable, self powered [ 1.670333] sdmmc1: sdmmc_mem_enable failed with error 60 [ 1.670333] sdmmc1: autoconfiguration error: couldn't enable card: 60 [ 1.680334] IPsec: Initialized Security Association Processing. [ 1.680334] sdmmc0: SD card status: 4-bit, C10, U1, A1 [ 1.680334] ld0 at sdmmc0: <0x03:0x5344:SC16G:0x80:0x7dc526bf:0x124> [ 1.690335] ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors [ 1.703376] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 3.470364] uhub2 at uhub1 port 1: vendor 05e3 (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/32.98, addr 2 [ 3.480365] uhub2: multiple transaction translators [ 3.480365] uhub2: 4 ports with 4 removable, self powered [ 4.890391] uhidev0 at uhub2 port 2 configuration 1 interface 0 [ 4.890391] uhidev0: Logitech (0x46d) USB Receiver (0xc534), rev 2.00/29.00, addr 3, iclass 3/1 [ 4.960392] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes [ 5.360399] wskbd0 at ukbd0 mux 1 [ 5.360399] uhidev1 at uhub2 port 2 configuration 1 interface 1 [ 5.360399] uhidev1: Logitech (0x46d) USB Receiver (0xc534), rev 2.00/29.00, addr 3, iclass 3/1 [ 5.590404] uhidev1: 17 report ids [ 5.590404] ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs [ 5.590404] wsmouse0 at ums0 mux 0 [ 5.590404] uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 [ 5.600404] uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 5.610404] uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0 [ 5.610404] uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0 [ 6.580422] urtwn0 at uhub2 port 3 [ 6.580422] urtwn0: Realtek (0xbda) 802.11n NIC (0x8179), rev 2.00/0.00, addr 4 [ 6.640424] urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address [_MAC_XXXXXXXXXX] [ 6.640424] urtwn0: 1 rx pipe, 2 tx pipes [ 6.640424] urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 6.650547] urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 6.660784] uhub1: autoconfiguration error: illegal enable change, port 1 [ 6.660784] WARNING: 3 errors while detecting hardware; check system log. [ 6.673647] boot device: ld0 [ 6.673647] root on ld0a dumps on ld0b [ 6.680785] root file system type: ffs [ 6.680785] kern.module.path=/stand/evbarm/8.99.34/modules [ 6.680785] WARNING: no TOD clock present [ 6.693623] WARNING: using filesystem time [ 6.697735] WARNING: CHECK AND RESET THE DATE!