Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-03-17 19:27:54
From: Sevan / Venture37
Description: Dell Latitude D410 PP06S
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.35 (GENERIC) #0: Sun Mar 3 04:51:57 UTC 2019 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC total memory = 1527 MB avail memory = 1480 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Dell Inc. Latitude D410 mainbus0 (root) ACPI: RSDP 0x00000000000FC9B0 000014 (v00 DELL ) ACPI: RSDT 0x000000005F7D1F90 000040 (v01 DELL CPi R 27D5091C ASL 00000061) ACPI: FACP 0x000000005F7D2C00 000074 (v01 DELL CPi R 27D5091C ASL 00000061) ACPI: DSDT 0x000000005F7D3800 00390B (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 0x000000005F7E2000 000040 ACPI: APIC 0x000000005F7D3400 000068 (v01 DELL CPi R 27D5091C ASL 00000047) ACPI: ASF! 0x000000005F7D3000 00005B (v16 DELL CPi R 27D5091C ASL 00000061) ACPI: MCFG 0x000000005F7D33C0 00003E (v16 DELL CPi R 27D5091C ASL 00000061) ACPI: SSDT 0x000000005F7D23E6 00023E (v01 PmRef Cpu0Ist 00003000 INTL 20030522) ACPI: SSDT 0x000000005F7D220E 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) ACPI: SSDT 0x000000005F7D2013 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522) ACPI: 4 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Pentium(R) M processor 1.73GHz, id 0x6d8 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20181213 acpi0: X/RSDT: OemId <DELL , CPi R ,27d5091c>, AslId <ASL ,00000061> ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C2F9B37C 000043 (v01 LMPWR DELLLOM 00001001 INTL 20030522) acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button MB1 (PNP0C01) at acpi0 not configured MB2 (PNP0C01) at acpi0 not configured MB3 (PNP0C01) at acpi0 not configured pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 MB4 (PNP0C01) at acpi0 not configured COPR (PNP0C04) at acpi0 not configured IRDA (SMCF010) at acpi0 not configured FTPM (PNP0C01) at acpi0 not configured acpivga0 at acpi0 (VID): ACPI Display Adapter acpiout0 at acpivga0 (TV, 0x0200): ACPI Display Output Device acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device acpiout2 at acpivga0 (LCD, 0x0400): ACPI Display Output Device acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device acpivga0: connected output devices: acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect acpivga0: 0x0200 (acpiout0): TV, head 0, bios detect acpivga0: 0x0400 (acpiout2): Unknown Output Device, head 0, bios detect acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect acpivga1 at acpi0 (VID2): ACPI Display Adapter acpivga1: autoconfiguration error: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA MB7 (PNP0C01) at acpi0 not configured acpitz0 at acpi0 (THM) acpitz0: levels: critical 100.0 C, passive cooling apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 1F pckbd0 at pckbc2 (kbd slot) pckbc2: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc2 (aux slot) pckbc2: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 2590 (rev. 0x03) agp0 at pchb0: i915-family chipset agp0: detected 7932k stolen memory agp0: aperture at 0xc0000000, size 0x10000000 i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2592 (rev. 0x03) vendor 8086 product 2792 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0: vendor 8086 product 2660 (rev. 0x03) ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci1 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet bge0: interrupting at ioapic0 pin 16 bge0: HW config 00000151, 0001c011, 00000000, 00000000 00000000 bge0: ASIC BCM5750 A1 (0x4001), Ethernet address [_MAC_XXXXXXXXXX] bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 8086 product 2658 (rev. 0x03) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 8086 product 2659 (rev. 0x03) uhci1: interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 8086 product 265a (rev. 0x03) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 8086 product 265b (rev. 0x03) uhci3: interrupting at ioapic0 pin 19 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 8086 product 265c (rev. 0x03) ehci0: interrupting at ioapic0 pin 16 ehci0: EHCI version 1.0 ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xd3) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled cbb0 at pci2 dev 1 function 0: vendor 104c product 8036 (rev. 0x00) vendor 104c product 8038 (miscellaneous communications) at pci2 dev 1 function 5 not configured iwi0 at pci2 dev 3 function 0: vendor 8086 product 4223 (rev. 0x05) iwi0: interrupting at ioapic0 pin 17 iwi0: 802.11 address [_MAC_XXXXXXXXXX] iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: cacheline 0x10 lattimer 0x40 cbb0: bhlc 0x824010 cbb0: interrupting at ioapic0 pin 19 cardslot0 at cbb0 cardbus0 at cardslot0: bus 3 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio auich0: interrupting at ioapic0 pin 16 auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D auich0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA> vendor 8086 product 266d (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2641 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) isa0 at ichlpcib0 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: C2: I/O, lat 50 us, pow 0 mW acpicpu0: C3: I/O, lat 50 us, pow 0 mW acpicpu0: P0: FFH, lat 10 us, pow 27000 mW, 1733 MHz acpicpu0: P1: FFH, lat 10 us, pow 21000 mW, 1333 MHz acpicpu0: P2: FFH, lat 10 us, pow 17000 mW, 1067 MHz acpicpu0: P3: FFH, lat 10 us, pow 13000 mW, 800 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz audio0 at auich0: full duplex, playback, capture, mmap, independent auich0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 auich0: Latency: 256 milliseconds uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered IPsec: Initialized Security Association Processing. umass0 at uhub4 port 1 configuration 1 interface 0 umass0: SanDisk (0x781) Ultra (0x5581), rev 2.10/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors sd0: 27061650 trailing sectors not covered by disklabel wd0 at atabus0 drive 0 wd0: <HTS421240H9AT00> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA), WRITE DMA FUA EXT sd0: 27061650 trailing sectors not covered by disklabel sd0: 27061650 trailing sectors not covered by disklabel sd0: 27061650 trailing sectors not covered by disklabel sd0: 27061650 trailing sectors not covered by disklabel WARNING: 1 error while detecting hardware; check system log. boot device: sd0 root on sd0a dumps on sd0b sd0: 27061650 trailing sectors not covered by disklabel root file system type: ffs kern.module.path=/stand/i386/8.99.35/modules kern info: [drm] Memory usable by graphics device = 256M kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) kern info: [drm] initialized overlay support intelfb0 at i915drmkms0 intelfb0: framebuffer at 0xdb916000, size 1024x768, depth 32, stride 4096 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0