Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-03-21 17:05:33
From: scole
Description: Dell vostro 1400 laptop i386
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000] 2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000] The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 8.99.34 (GENERIC) #0: Thu Feb 28 17:41:27 UTC 2019
[     1.000000] 	xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
[     1.000000] total memory = 2046 MB
[     1.000000] avail memory = 1991 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000003] Dell Inc. Vostro 1400                     
[     1.000003] mainbus0 (root)
[     1.000003] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
[     1.000003] ACPI: XSDT 0x000000007FE6F200 000054 (v01 DELL   M08      27D8070A ASL  00000061)
[     1.000003] ACPI: FACP 0x000000007FE6F09C 0000F4 (v04 DELL   M08      27D8070A ASL  00000061)
[     1.000003] ACPI: DSDT 0x000000007FE6F800 005676 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[     1.000003] ACPI: FACS 0x000000007FE7E000 000040
[     1.000003] ACPI: HPET 0x000000007FE6F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[     1.000003] ACPI: APIC 0x000000007FE6F400 000068 (v01 DELL   M08      27D8070A ASL  00000047)
[     1.000003] ACPI: MCFG 0x000000007FE6F3C0 00003E (v16 DELL   M08      27D8070A ASL  00000061)
[     1.000003] ACPI: BOOT 0x000000007FE6EFC0 000028 (v01 DELL   M08      27D8070A ASL  00000061)
[     1.000003] ACPI: SSDT 0x000000007FE6D9B8 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[     1.000003] ACPI: 2 ACPI AML tables successfully acquired and loaded
[     1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
[     1.000003] cpu0 at mainbus0 apid 0
[     1.000003] cpu0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz, id 0x6fb
[     1.000003] cpu0: package 0, core 0, smt 0
[     1.000003] cpu1 at mainbus0 apid 1
[     1.000003] cpu1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz, id 0x6fb
[     1.000003] cpu1: package 0, core 1, smt 0
[     1.000003] acpi0 at mainbus0: Intel ACPICA 20181213
[     1.000003] acpi0: X/RSDT: OemId <DELL  , M08    ,27d8070a>, AslId <ASL ,00000061>
[     1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f4000000
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0x00000000C3AF3C4C 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0x00000000C3AC200C 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0x00000000C3ABA9BC 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0x00000000C3CDDDDC 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[     1.000003] acpi0: SCI interrupting at int 9
[     1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[     1.039796] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.039796] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[     1.040006] pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
[     1.040006] pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
[     1.040006] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
[     1.040006] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
[     1.040006] midi0 at pcppi1: PC speaker
[     1.040006] sysbeep0 at pcppi1
[     1.040006] MB4 (PNP0C01) at acpi0 not configured
[     1.040006] COPR (PNP0C04) at acpi0 not configured
[     1.040006] acpivga0 at acpi0 (VID): ACPI Display Adapter
[     1.040006] acpiout0 at acpivga0 (TV, 0x0200): ACPI Display Output Device
[     1.040006] acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
[     1.040006] acpiout2 at acpivga0 (LCD, 0x0118): ACPI Display Output Device
[     1.040006] acpiout2: brightness levels: [12,24,36,48,60,72,84,100]
[     1.040006] acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output Device
[     1.040006] acpivga0: connected output devices:
[     1.040006] acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
[     1.040006] acpivga0:   0x0200 (acpiout0): TV, head 0, bios detect
[     1.040006] acpivga0:   0x0118 (acpiout2): Unknown Output Device, head 0, bios detect
[     1.040006] acpivga0:   0x0120 (acpiout3): Unknown Output Device, head 0, bios detect
[     1.040006] MB2 (PNP0C01) at acpi0 not configured
[     1.040006] MB3 (PNP0C01) at acpi0 not configured
[     1.040006] MB1 (PNP0C01) at acpi0 not configured
[     1.040006] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[     1.040006] acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
[     1.040006] acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
[     1.040006] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[     1.040006] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[     1.040006] acpidalb0 at acpi0 (MBTN, PNP0C32-0): Direct Application Launch Button
[     1.040006] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[     1.040006] wmidell0 at acpiwmi0: Dell WMI mappings version 1
[     1.040006] acpitz0 at acpi0 (THM)
[     1.040006] acpitz0: levels: critical 99.0 C, passive cooling
[     1.040006] apm0 at acpi0: Power Management spec V1.2
[     1.040006] ACPI: Enabled 4 GPEs in block 00 to 1F
[     1.040006] pckbd0 at pckbc2 (kbd slot)
[     1.040006] pckbc2: using irq 1 for kbd slot
[     1.040006] wskbd0 at pckbd0: console keyboard
[     1.040006] pms0 at pckbc2 (aux slot)
[     1.040006] pms0: autoconfiguration error: Failed to initialize an ALPS device.
[     1.040006] pckbc2: using irq 12 for aux slot
[     1.040006] wsmouse0 at pms0 mux 0
[     1.040006] attimer1: attached to pcppi1
[     1.040006] pci0 at mainbus0 bus 0: configuration mode 1
[     1.040006] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.040006] pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a00 (rev. 0x0c)
[     1.040006] agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
[     1.040006] ppb0 at pci0 dev 1 function 0: vendor 8086 product 2a01 (rev. 0x0c)
[     1.040006] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
[     1.040006] pci1 at ppb0 bus 1
[     1.040006] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.040006] nouveau0 at pci1 dev 0 function 0: vendor 10de product 0427 (rev. 0xa1)
[     1.040006] nouveau0: info: NVIDIA G86 (086700a2)
[     1.040006] nouveau0: info: bios: version xxx.xxx.xxx.xxx.12
[     1.040006] nouveau0: info: fb: 128 MiB GDDR3
[     1.040006] Zone  kernel: Available graphics memory: 788302 kiB
[     1.040006] nouveau0: info: DRM: VRAM: 128 MiB
[     1.040006] nouveau0: info: DRM: GART: 1048576 MiB
[     1.040006] nouveau0: info: DRM: TMDS table version 2.0
[     1.040006] nouveau0: info: DRM: DCB version 4.0
[     1.040006] nouveau0: info: DRM: DCB outp 00: 01000323 00010034
[     1.040006] nouveau0: info: DRM: DCB outp 01: 02011300 00000028
[     1.040006] nouveau0: info: DRM: DCB outp 02: 010223f1 00c0c080
[     1.040006] nouveau0: info: DRM: DCB conn 00: 0041
[     1.040006] nouveau0: info: DRM: DCB conn 01: 0100
[     1.040006] nouveau0: info: DRM: DCB conn 02: 0310
[     1.040006] nouveau0: info: DRM: DCB conn 03: 0311
[     1.040006] nouveau0: info: DRM: DCB conn 04: 0313
[     1.040006] nouveau0: autoconfiguration error: warn: DRM: failed to create encoder 0/1/0: -19
[     1.040006] nouveau0: autoconfiguration error: warn: DRM: TV-1 has no encoders, removing
[     1.040006] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     1.040006] kern info: [drm] Driver supports precise vblank timestamp query.
[     1.040006] nouveau0: info: DRM: MM: using M2MF for buffer copies
[     1.040006] nouveaufb0 at nouveau0
[     1.040006] nouveaufb0: framebuffer at 0xdc68f000, size 1280x800, depth 32, stride 5120
[     1.040006] wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[     1.040006] wsmux1: connecting to wsdisplay0
[     1.040006] uhci0 at pci0 dev 26 function 0: vendor 8086 product 2834 (rev. 0x02)
[     1.040006] uhci0: interrupting at ioapic0 pin 20
[     1.040006] usb0 at uhci0: USB revision 1.0
[     1.040006] uhci1 at pci0 dev 26 function 1: vendor 8086 product 2835 (rev. 0x02)
[     1.040006] uhci1: interrupting at ioapic0 pin 21
[     1.040006] usb1 at uhci1: USB revision 1.0
[     1.040006] ehci0 at pci0 dev 26 function 7: vendor 8086 product 283a (rev. 0x02)
[     1.040006] ehci0: interrupting at ioapic0 pin 22
[     1.040006] ehci0: EHCI version 1.0
[     1.040006] ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
[     1.040006] usb2 at ehci0: USB revision 2.0
[     1.040006] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[     1.040006] hdaudio0: interrupting at msi0 vec 0
[     1.040006] hdafg0 at hdaudio0: vendor 8384 product 7616
[     1.040006] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[     1.040006] hdafg0: DAC01 2ch: Speaker [Jack]
[     1.040006] hdafg0: ADC02 2ch: Line In [Jack]
[     1.040006] hdafg0: ADC03 2ch: Mic In [Built-In]
[     1.040006] hdafg0: DIG04 2ch: SPDIF Out [Jack]
[     1.040006] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[     1.040006] audio0 at hdafg0: full duplex, playback, capture, mmap, independent
[     1.040006] hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
[     1.040006] hdafg0: Latency: 128 milliseconds
[     1.040006] hdvsmfg at hdaudio0 not configured
[     1.040006] ppb1 at pci0 dev 28 function 0: vendor 8086 product 283f (rev. 0x02)
[     1.040006] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.040006] pci2 at ppb1 bus 11
[     1.040006] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.040006] ppb2 at pci0 dev 28 function 1: vendor 8086 product 2841 (rev. 0x02)
[     1.040006] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.040006] pci3 at ppb2 bus 12
[     1.040006] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.040006] wpi0 at pci3 dev 0 function 0: vendor 8086 product 4222 (rev. 0x02)
[     1.040006] wpi0: interrupting at msi1 vec 0
[     1.040006] wpi0: MoW1, address xx:xx:xx:xx:xx:xx
[     1.040006] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     1.040006] wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[     1.040006] wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     1.040006] ppb3 at pci0 dev 28 function 3: vendor 8086 product 2845 (rev. 0x02)
[     1.040006] ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.040006] pci4 at ppb3 bus 13
[     1.040006] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.040006] ppb4 at pci0 dev 28 function 5: vendor 8086 product 2849 (rev. 0x02)
[     1.040006] ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.040006] pci5 at ppb4 bus 9
[     1.040006] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.040006] bge0 at pci5 dev 0 function 0: Broadcom BCM5906M Fast Ethernet
[     1.040006] bge0: interrupting at msi2 vec 0
[     1.040006] bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
[     1.040006] bge0: ASIC BCM5906 A2 (0xc002), Ethernet address xx:xx:xx:xx:xx:xx
[     1.040006] bge0: setting short Tx thresholds
[     1.040006] brgphy0 at bge0 phy 1: BCM5906 10/100baseTX media interface, rev. 0
[     1.040006] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.040006] uhci2 at pci0 dev 29 function 0: vendor 8086 product 2830 (rev. 0x02)
[     1.040006] uhci2: interrupting at ioapic0 pin 20
[     1.040006] usb3 at uhci2: USB revision 1.0
[     1.040006] uhci3 at pci0 dev 29 function 1: vendor 8086 product 2831 (rev. 0x02)
[     1.040006] uhci3: interrupting at ioapic0 pin 21
[     1.040006] usb4 at uhci3: USB revision 1.0
[     1.040006] uhci4 at pci0 dev 29 function 2: vendor 8086 product 2832 (rev. 0x02)
[     1.040006] uhci4: interrupting at ioapic0 pin 22
[     1.040006] usb5 at uhci4: USB revision 1.0
[     1.040006] ehci1 at pci0 dev 29 function 7: vendor 8086 product 2836 (rev. 0x02)
[     1.040006] ehci1: interrupting at ioapic0 pin 20
[     1.040006] ehci1: EHCI version 1.0
[     1.040006] ehci1: 3 companion controllers, 2 ports each: uhci2 uhci3 uhci4
[     1.040006] usb6 at ehci1: USB revision 2.0
[     1.040006] ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xf2)
[     1.040006] pci6 at ppb5 bus 3
[     1.040006] pci6: i/o space, memory space enabled
[     1.040006] fwohci0 at pci6 dev 1 function 0: vendor 1180 product 0832 (rev. 0x05)
[     1.040006] fwohci0: interrupting at ioapic0 pin 19
[     1.040006] fwohci0: OHCI version 1.10 (ROM=0)
[     1.040006] fwohci0: No. of Isochronous channels is 4.
[     1.040006] fwohci0: EUI64 xx:xx:xx:xx:xx:xx:e0:38
[     1.040006] fwohci0: Phy 1394a available S400, 1 ports.
[     1.040006] fwohci0: Link S400, max_rec 2048 bytes.
[     1.040006] ieee1394if0 at fwohci0: IEEE1394 bus
[     1.040006] fwip0 at ieee1394if0: IP over IEEE1394
[     1.040006] fwohci0: Initiate bus reset
[     1.040006] fwohci0: Clear PME# now
[     1.040006] sdhc0 at pci6 dev 1 function 1: vendor 1180 product 0822 (rev. 0x22)
[     1.040006] sdhc0: interrupting at ioapic0 pin 18
[     1.040006] sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
[     1.040006] sdmmc0 at sdhc0 slot 0
[     1.040006] vendor 1180 product 0592 (miscellaneous system, revision 0x12) at pci6 dev 1 function 2 not configured
[     1.040006] vendor 1180 product 0852 (miscellaneous system, revision 0x12) at pci6 dev 1 function 3 not configured
[     1.040006] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2815 (rev. 0x02)
[     1.040006] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[     1.040006] ichlpcib0: 24-bit timer
[     1.040006] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[     1.040006] tco0: Min/Max interval 1/367 seconds
[     1.040006] piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x02)
[     1.040006] piixide0: bus-master DMA support present
[     1.040006] piixide0: primary channel configured to compatibility mode
[     1.040006] piixide0: primary channel interrupting at ioapic0 pin 14
[     1.040006] atabus0 at piixide0 channel 0
[     1.040006] piixide0: secondary channel configured to compatibility mode
[     1.040006] piixide0: secondary channel ignored (disabled)
[     1.040006] piixide1 at pci0 dev 31 function 2: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x02)
[     1.040006] piixide1: bus-master DMA support present
[     1.040006] piixide1: primary channel configured to native-PCI mode
[     1.040006] piixide1: using ioapic0 pin 17 for native-PCI interrupt
[     1.040006] atabus1 at piixide1 channel 0
[     1.040006] piixide1: secondary channel configured to native-PCI mode
[     1.040006] atabus2 at piixide1 channel 1
[     1.040006] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 283e (rev. 0x02)
[     1.040006] ichsmb0: interrupting at ioapic0 pin 17
[     1.040006] iic0 at ichsmb0: I2C bus
[     1.040006] isa0 at ichlpcib0
[     1.040006] isapnp0 at isa0 port 0x279
[     1.040006] isapnp0: no ISA Plug 'n Play devices found
[     1.040006] acpicpu0 at cpu0: ACPI CPU
[     1.040006] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
[     1.040006] acpicpu0: C2: FFH, lat   1 us, pow   500 mW
[     1.040006] acpicpu0: C3: FFH, lat  57 us, pow   100 mW, bus master check
[     1.040006] acpicpu0: P0: FFH, lat  10 us, pow 32000 mW, 2201 MHz, turbo boost
[     1.040006] acpicpu0: P1: FFH, lat  10 us, pow 31000 mW, 2200 MHz
[     1.040006] acpicpu0: P2: FFH, lat  10 us, pow 20000 mW, 1600 MHz
[     1.040006] acpicpu0: P3: FFH, lat  10 us, pow 13000 mW, 1200 MHz
[     1.040006] acpicpu0: P4: FFH, lat  10 us, pow 10000 mW,  800 MHz
[     1.040006] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.040006] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.040006] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.040006] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.040006] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.040006] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.040006] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.040006] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.040006] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[     1.040006] acpicpu1 at cpu1: ACPI CPU
[     1.040006] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[     1.040006] fwohci0: BUS reset
[     1.040006] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
[     1.040006] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[     1.040006] ieee1394if0: bus manager 0
[     1.040006] nouveau0: autoconfiguration error: error: disp: ERROR 5 [INVALID_STATE] 0b [] chid 1 mthd 0080 data 00000000
[     1.040006] nouveau0: info: disp: Base 1:
[     1.040006] nouveau0: info: disp: 	0084: 00000000              
[     1.040006] nouveau0: info: disp: 	0088: 00000000              
[     1.040006] nouveau0: info: disp: 	008c: 00000000              
[     1.040006] nouveau0: info: disp: 	0090: 00000000              
[     1.040006] nouveau0: info: disp: 	0094: 00000000 -> f0000000
[     1.040006] nouveau0: info: disp: 	00a0: 00000000              
[     1.040006] nouveau0: info: disp: 	00a4: 00000000              
[     1.040006] nouveau0: info: disp: 	00c0: 00000000 -> ffff0000
[     1.040006] nouveau0: info: disp: 	00c4: 00000000              
[     1.040006] nouveau0: info: disp: 	00c8: 00000000              
[     1.040006] nouveau0: info: disp: 	00cc: 00000000              
[     1.040006] nouveau0: info: disp: 	00e0: 00000000 -> 40000000
[     1.040006] nouveau0: info: disp: 	00e4: 00000000              
[     1.040006] nouveau0: info: disp: 	00e8: 00000000              
[     1.040006] nouveau0: info: disp: 	00ec: 00000000              
[     1.040006] nouveau0: info: disp: 	00fc: 00000000              
[     1.040006] nouveau0: info: disp: 	0100: fffe0000              
[     1.040006] nouveau0: info: disp: 	0104: 00000000              
[     1.040006] nouveau0: info: disp: 	0110: 00000000              
[     1.040006] nouveau0: info: disp: 	0114: 00000000              
[     1.040006] nouveau0: info: disp: Base 1 - Image 0:
[     1.040006] nouveau0: info: disp: 	0800: 00000000 -> 00000500
[     1.040006] nouveau0: info: disp: 	0804: 00000000              
[     1.040006] nouveau0: info: disp: 	0808: 00000000 -> 03200500
[     1.040006] nouveau0: info: disp: 	080c: 00000000 -> 00101400
[     1.040006] nouveau0: info: disp: 	0810: 0000e900 -> 0000cf00
[     1.040006] nouveau0: info: disp: Base 1 - Image 1:
[     1.040006] nouveau0: info: disp: 	0c00: 00000000 -> 00000500
[     1.040006] nouveau0: info: disp: 	0c04: 00000000              
[     1.040006] nouveau0: info: disp: 	0c08: 00000000 -> 03200500
[     1.040006] nouveau0: info: disp: 	0c0c: 00000000 -> 00101400
[     1.040006] nouveau0: info: disp: 	0c10: 0000e900 -> 0000cf00
[     1.040006] nouveau0: autoconfiguration error: error: disp: ERROR 5 [INVALID_STATE] 0b [] chid 2 mthd 0080 data 00000000
[     1.040006] nouveau0: info: disp: Base 2:
[     1.040006] nouveau0: info: disp: 	0084: 00000000              
[     1.040006] nouveau0: info: disp: 	0088: 00000000              
[     1.040006] nouveau0: info: disp: 	008c: 00000000              
[     1.040006] nouveau0: info: disp: 	0090: 00000000              
[     1.040006] nouveau0: info: disp: 	0094: 00000000 -> f0000000
[     1.040006] nouveau0: info: disp: 	00a0: 00000000              
[     1.040006] nouveau0: info: disp: 	00a4: 00000000              
[     1.040006] nouveau0: info: disp: 	00c0: 00000000 -> ffff0000
[     1.040006] nouveau0: info: disp: 	00c4: 00000000              
[     1.040006] nouveau0: info: disp: 	00c8: 00000000              
[     1.040006] nouveau0: info: disp: 	00cc: 00000000              
[     1.040006] nouveau0: info: disp: 	00e0: 00000000 -> 40000000
[     1.040006] nouveau0: info: disp: 	00e4: 00000000              
[     1.040006] nouveau0: info: disp: 	00e8: 00000000              
[     1.040006] nouveau0: info: disp: 	00ec: 00000000              
[     1.040006] nouveau0: info: disp: 	00fc: 00000000              
[     1.040006] nouveau0: info: disp: 	0100: fffe0000              
[     1.040006] nouveau0: info: disp: 	0104: 00000000              
[     1.040006] nouveau0: info: disp: 	0110: 00000000              
[     1.040006] nouveau0: info: disp: 	0114: 00000000              
[     1.040006] nouveau0: info: disp: Base 2 - Image 0:
[     1.040006] nouveau0: info: disp: 	0800: 00000000 -> 00000500
[     1.040006] nouveau0: info: disp: 	0804: 00000000              
[     1.040006] nouveau0: info: disp: 	0808: 00000000 -> 03200500
[     1.040006] nouveau0: info: disp: 	080c: 00000000 -> 00101400
[     1.040006] nouveau0: info: disp: 	0810: 0000e900 -> 0000cf00
[     1.040006] nouveau0: info: disp: Base 2 - Image 1:
[     1.040006] nouveau0: info: disp: 	0c00: 00000000 -> 00000500
[     1.040006] nouveau0: info: disp: 	0c04: 00000000              
[     1.040006] nouveau0: info: disp: 	0c08: 00000000 -> 03200500
[     1.040006] nouveau0: info: disp: 	0c0c: 00000000 -> 00101400
[     1.040006] nouveau0: info: disp: 	0c10: 0000e900 -> 0000cf00
[     1.040006] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     2.035099] atapibus0 at atabus0: 2 targets
[     2.045204] acpiacad0: AC adapter online.
[     2.065208] acpibat0: Sanyo LION rechargeable battery
[     2.065208] acpibat0: granularity: low->warn 0.052 Ah, warn->full 0.052 Ah
[     2.075152] uhub0 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     2.075152] uhub0: 2 ports with 2 removable, self powered
[     2.075152] uhub1 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     2.075152] uhub1: 2 ports with 2 removable, self powered
[     2.075152] uhub2 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     2.075152] uhub2: 2 ports with 2 removable, self powered
[     2.075152] uhub3 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     2.075152] uhub3: 2 ports with 2 removable, self powered
[     2.075152] uhub4 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     2.075152] uhub4: 4 ports with 4 removable, self powered
[     2.075152] uhub5 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     2.075152] uhub5: 2 ports with 2 removable, self powered
[     2.085130] cd0 at atapibus0 drive 0: <PBDS DVD+/-RW DS-8W1P, 711120044491, BD1B> cdrom removable
[     2.095135] uhub6 at usb6: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     2.095135] uhub6: 6 ports with 6 removable, self powered
[     2.115147] IPsec: Initialized Security Association Processing.
[     2.135223] cd0: 32-bit data port
[     2.135223] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[     2.135223] cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[     4.346549] umass0 at uhub6 port 1 configuration 1 interface 0
[     4.346549] umass0: SanDisk (0x781) Ultra (0x5581), rev 2.10/1.00, addr 2
[     4.346549] umass0: using SCSI over Bulk-Only
[     4.346549] scsibus0 at umass0: 2 targets, 1 lun per target
[     4.346549] sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable
[     4.346549] sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors
[     4.356555] sd0: 27061650 trailing sectors not covered by disklabel
[     5.117011] wd0 at atabus1 drive 0
[     5.117011] wd0: <ST9320320AS>
[     5.117011] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     5.117011] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
[     5.197059] wd0: 32-bit data port
[     5.197059] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[     5.197059] wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
[ 5.877467] uvideo0 at uhub6 port 6 configuration 1 interface 0: OmniVision Technologies, Inc. -2640-xxx.xxx.xxx.xxx (0x5a9) Laptop Integrated Webcam (0x2640), rev 2.00/1.00, addr 3
[ 5.877467] video0 at uvideo0: OmniVision Technologies, Inc. -2640-xxx.xxx.xxx.xxx (0x5a9) Laptop Integrated Webcam (0x2640), rev2.00/1.00, addr 3
[     5.907485] sd0: 27061650 trailing sectors not covered by disklabel
[     5.907485] sd0: 27061650 trailing sectors not covered by disklabel
[     5.927497] sd0: 27061650 trailing sectors not covered by disklabel
[     5.927497] sd0: 27061650 trailing sectors not covered by disklabel
[     5.937503] WARNING: 6 errors while detecting hardware; check system log.
[     5.937503] boot device: sd0
[     5.937503] root on sd0a dumps on sd0b
[     5.937503] sd0: 27061650 trailing sectors not covered by disklabel
[     5.947509] root file system type: ffs
[     5.947509] kern.module.path=/stand/i386/8.99.34/modules
[    32.103196] acpibat0: state changed on 'charge state' to 'LOW'