Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-04-14 20:53:43
From: bcran
Description: MacchiatoBIN Double Shot (FDT)
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT r345620 GENERIC arm64
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP bf810000 mode 2 pages 992
MAP bfc90000 mode 2 pages 848
MAP f4284000 mode 0 pages 1
MAP f4440000 mode 0 pages 1
MAP f4700000 mode 0 pages 1
MAP f93c0000 mode 0 pages 48
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus3: <Flattened device tree simple bus> on simplebus2
simplebus4: <Flattened device tree simple bus> on ofwbus0
simplebus5: <Flattened device tree simple bus> on simplebus4
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x6f4000-0x6f5fff on simplebus1
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x440000-0x441fff on simplebus3
simple_mfd2: <Simple MFD (Multi-Functions Device)> mem 0x440000-0x441fff on simplebus5
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
mv_ap806_clock0: <Marvell AP806 Clock Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
mv_cp110_clock0: <Marvell CP110 Clock Controller> mem 0x440000-0x441fff on simple_mfd1
mv_cp110_clock1: <Marvell CP110 Clock Controller> mem 0x440000-0x441fff on simple_mfd2
gic0: <ARM Generic Interrupt Controller> mem 0x210000-0x21ffff,0x220000-0x23ffff,0x240000-0x25ffff,0x260000-0x27ffff irq 0 on simplebus1
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 352
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x280000-0x280fff on gic0
gicv2m1: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x290000-0x290fff on gic0
gicv2m2: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x2a0000-0x2a0fff on gic0
gicv2m3: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x2b0000-0x2b0fff on gic0
mv_ap806_gicp0: <Marvell GICP> mem 0x3f0040-0x3f004f on simplebus1
mv_pinctrl0: <Marvell Pinctrl controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpio0: <Marvell Integrated GPIO Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpio0: ERROR: no interrupts entry found!
device_attach: gpio0 attach returned 6
mv_cp110_icu0: <Marvell Interrupt Consolidation Unit> mem 0x1e0000-0x1e043f on simplebus3
gpio0: <Marvell Integrated GPIO Controller> mem 0x440000-0x441fff irq 61,62,63,64 on simple_mfd1
gpio0: 4 IRQs available
gpio0: Disable interrupts (offset = 140 + EDGE(0x18)
gpio0: Disable interrupts (offset = 140 + LEV(0x1C))
gpio0: Setup intr 0
gpio0: Setup intr 1
gpio0: Setup intr 2
gpio0: Setup intr 3
gpio0: Clear int status (offset = 140)
gpiobus0: <GPIO bus> on gpio0
mv_cp110_icu1: <Marvell Interrupt Consolidation Unit> mem 0x1e0000-0x1e043f on simplebus5
gpio1: <Marvell Integrated GPIO Controller> mem 0x440000-0x441fff irq 65,66,67,68 on simple_mfd2
gpio1: 4 IRQs available
gpio1: Disable interrupts (offset = 100 + EDGE(0x18)
gpio1: Disable interrupts (offset = 100 + LEV(0x1C))
gpio1: Setup intr 0
gpio1: Setup intr 1
gpio1: Setup intr 2
gpio1: Setup intr 3
gpio1: Clear int status (offset = 100)
gpiobus1: <GPIO bus> on gpio1
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on simplebus1
Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000
gpio2: <Marvell Integrated GPIO Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpio2: ERROR: no interrupts entry found!
device_attach: gpio2 attach returned 6
gpio2: <Marvell Integrated GPIO Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpio2: ERROR: no interrupts entry found!
device_attach: gpio2 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
uart0: <16550 or compatible> mem 0x512000-0x5120ff irq 9 on simplebus1
uart0: console (115200,n,8,1)
sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0x6e0000-0x6e02ff irq 12 on simplebus1
mmc0: <MMC/SD bus> on sdhci_xenon0
gpio2: <Marvell Integrated GPIO Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpio2: ERROR: no interrupts entry found!
device_attach: gpio2 attach returned 6
mv_thermal0: <Marvell Thermal Sensor Controller> mem 0x6f808c-0x6f808f,0x6f8084-0x6f808b on simplebus1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
mv_thermal1: <Marvell Thermal Sensor Controller> mem 0x400078-0x40007b,0x400070-0x400077 on simplebus3
gpioc0: <GPIO controller> on gpio0
xhci0: <Marvell Integrated USB 3.0 controller> mem 0x500000-0x503fff irq 17 on simplebus3
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
xhci1: <Marvell Integrated USB 3.0 controller> mem 0x510000-0x513fff irq 18 on simplebus3
xhci1: 32 bytes context size, 32-bit DMA
usbus1 on xhci1
ahci0: <AHCI SATA controller> mem 0x540000-0x56ffff irq 19 on simplebus3
ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x701000-0x70101f irq 20 on simplebus3
iicbus0: <OFW I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
twsi1: <Marvell Integrated I2C Bus Controller> mem 0x701100-0x70111f irq 21 on simplebus3
iicbus1: <OFW I2C bus> on twsi1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xe0
uart1: <16550 or compatible> mem 0x702100-0x7021ff irq 23 on simplebus3
sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0x780000-0x7802ff irq 28 on simplebus3
mmc1: <MMC/SD bus> on sdhci_xenon1
mv_thermal2: <Marvell Thermal Sensor Controller> mem 0x400078-0x40007b,0x400070-0x400077 on simplebus5
gpioc1: <GPIO controller> on gpio1
xhci2: <Marvell Integrated USB 3.0 controller> mem 0x500000-0x503fff irq 39 on simplebus5
xhci2: 32 bytes context size, 32-bit DMA
usbus2 on xhci2
ahci1: <AHCI SATA controller> mem 0x540000-0x56ffff irq 41 on simplebus5
ahci1: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
uart2: <16550 or compatible> mem 0x702000-0x7020ff irq 44 on simplebus5
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen2.1: <Marvell XHCI root HUB> at usbus2
uhub0: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen1.1: <Marvell XHCI root HUB> at usbus1
uhub1: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Marvell XHCI root HUB> at usbus0
uhub2: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 8GB <MMCHC 8GME4R 0.1 SN B3B78C73 MFG 04/2017 by 21 0x0000> at mmc0 50.0MHz/8bit/65535-block
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 524kB partion 3 at mmcsd0
mmcsd1: 64GB <SDHC AGGCE 8.0 SN 80B640B8 MFG 06/2017 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <CT500MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
Release APs...done
Trying to mount root from ufs:/dev/ada0p2 [rw]...
CPU  0: ARM Cortex-A72 r0p1 affinity:  0  0
 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <0>
      Memory Model Features 0 = <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,16TB PA>
      Memory Model Features 1 = <>
      Memory Model Features 2 = <32b CCIDX,48b VA>
             Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
             Debug Features 1 = <0>
         Auxiliary Features 0 = <0>
         Auxiliary Features 1 = <0>
CPU  1: ARM Cortex-A72 r0p1 affinity:  0  1
CPU  2: ARM Cortex-A72 r0p1 affinity:  1  0
CPU  3: ARM Cortex-A72 r0p1 affinity:  1  1
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
lo0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)