Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2019-04-16 16:04:31
From: Chicho
Description: FreeBSD 12.0-RELEASE on a Compulab fitlet2
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p3 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
Skipping TSC calibration since no legacy devices reported by FADT and CPUID works
CPU: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (1593.60-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3887157248 (3707 MB)
CPU microcode: no matching update found
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1593600000 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel (0x5a98) HDA Controller> mem 0x7ffff00000-0x7ffff03fff,0x7fffe00000-0x7fffefffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xc1210000-0xc1211fff,0xc1213000-0xc12130ff,0xc1212000-0xc12127ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xc1100000-0xc111ffff,0xc1120000-0xc1123fff at device 0.0 on pci1
igb0: attach_pre capping queues at 2
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 2
igb0: pxm cpus: 4 queue msgs: 4 admincnt: 1
igb0: using 2 rx queues 2 tx queues 
igb0: Using MSIX interrupts with 3 vectors
igb0: allocated for 2 tx_queues
igb0: allocated for 2 rx_queues
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xc1000000-0xc101ffff,0xc1020000-0xc1023fff at device 0.0 on pci2
igb1: attach_pre capping queues at 2
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 2
igb1: pxm cpus: 4 queue msgs: 4 admincnt: 1
igb1: using 2 rx queues 2 tx queues 
igb1: Using MSIX interrupts with 3 vectors
igb1: allocated for 2 tx_queues
igb1: allocated for 2 rx_queues
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0xc1200000-0xc120ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1150 (Rear Analog)> at nid 26 and 24 on hdaa0
pcm1: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel (0x280a) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x280a) Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel (0x280a) (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <M2SCF-6M 32GB Q0707A> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30208MB (61865984 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 15 ports with 15 removable, self powered
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM,SHA1,SHA256> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
igb0: changing name to 'wan0'
igb1: changing name to 'lan0'
lo0: link state changed to UP
vlan0: changing name to 'data'
vlan1: changing name to 'voice'
vlan2: changing name to 'guest'
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
lan0: link state changed to UP
guest: link state changed to UP
data: link state changed to UP
voice: link state changed to UP
wan0: link state changed to UP