Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-04-22 21:55:47
From: tls
Description: NetBSD-current on Protectli Vault FW4A
NetBSD 8.99.37 (GENERIC) #0: Sun Apr 21 02:40:35 UTC 2019
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3987 MB
avail memory = 3846 MB
cpu_rng: RDRAND
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Protectli FW4A (Ver 1.1)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079842080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000079849700 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20181213/tbfadt-642)
ACPI: DSDT 0x00000000798421A0 00755C (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000798DEF80 000040
ACPI: APIC 0x0000000079849810 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000079849898 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000798498E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x0000000079849980 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: MCFG 0x0000000079849A88 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000079849AC8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x0000000079849B00 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x000000007984A268 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x000000007984A4F8 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x000000007984A678 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: CSRT 0x000000007984A6C0 00014C (v00 INTEL EDK2 00000005 INTL 20120624)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 87 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz, id 0x30679
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz, id 0x30679
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz, id 0x30679
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz, id 0x30679
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20181213
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFBCE70B84010 00037A (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFBCE70B8F810 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFBCDF90BB050 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFBCDF900B5F8 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout8: brightness levels: [0-100]
acpiout9 at acpivga0 (ISP0, 0x0f38): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout8): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
ADMA (DMA0F28) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MBID (INT33BD) at acpi0 not configured
ACPI: Enabled 6 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0f00 (rev. 0x11)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0f31 (rev. 0x11)
ahcisata0 at pci0 dev 19 function 0: vendor 8086 product 0f23 (rev. 0x11)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xc720ff01<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi0 vec 0
atabus0 at ahcisata0 channel 0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 0f35 (rev. 0x11)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 0f18 (miscellaneous crypto, revision 0x11) at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 0f48 (rev. 0x11)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82583V (rev. 0x00)
wm0: interrupting at msi2 vec 0
wm0: PCI-Express bus
wm0: 64 words (8 address bits) SPI EEPROM, version 1.10.0
wm0: ASPM L0s and L1 are disabled to workaround the errata.
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy0 at wm0 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 8086 product 0f4a (rev. 0x11)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: Intel i82583V (rev. 0x00)
wm1: interrupting at msi3 vec 0
wm1: PCI-Express bus
wm1: 64 words (8 address bits) SPI EEPROM, version 1.10.0
wm1: ASPM L0s and L1 are disabled to workaround the errata.
wm1: Ethernet address [_MAC_XXXXXXXXXX]
wm1: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy1 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 8086 product 0f4c (rev. 0x11)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci3 dev 0 function 0: Intel i82583V (rev. 0x00)
wm2: interrupting at msi4 vec 0
wm2: PCI-Express bus
wm2: 64 words (8 address bits) SPI EEPROM, version 1.10.0
wm2: ASPM L0s and L1 are disabled to workaround the errata.
wm2: Ethernet address [_MAC_XXXXXXXXXX]
wm2: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy2 at wm2 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 3: vendor 8086 product 0f4e (rev. 0x11)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm3 at pci4 dev 0 function 0: Intel i82583V (rev. 0x00)
wm3: interrupting at msi5 vec 0
wm3: PCI-Express bus
wm3: 64 words (8 address bits) SPI EEPROM, version 1.10.0
wm3: ASPM L0s and L1 are disabled to workaround the errata.
wm3: Ethernet address [_MAC_XXXXXXXXXX]
wm3: 0x2a4440<SPI,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy3 at wm3 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0: vendor 8086 product 0f1c (rev. 0x11)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 0f12 (rev. 0x11)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 500 us, pow 10 mW
acpicpu0: C3: FFH, lat 1500 us, pow 10 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1909 MHz
acpicpu0: P1: FFH, lat 10 us, pow 1835 mW, 1743 MHz
acpicpu0: P2: FFH, lat 10 us, pow 1670 mW, 1577 MHz
acpicpu0: P3: FFH, lat 10 us, pow 1505 mW, 1411 MHz
acpicpu0: P4: FFH, lat 10 us, pow 1341 mW, 1245 MHz
acpicpu0: P5: FFH, lat 10 us, pow 1176 mW, 1079 MHz
acpicpu0: P6: FFH, lat 10 us, pow 1011 mW, 913 MHz
acpicpu0: P7: FFH, lat 10 us, pow 847 mW, 747 MHz
acpicpu0: P8: FFH, lat 10 us, pow 600 mW, 498 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 525 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 450 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 300 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 225 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 150 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 75 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=110
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=110
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=110
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=110
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1916877960 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <Samsung SSD 860 EVO mSATA 500GB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
WARNING: 10 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.37/modules
kern info: [drm] Memory usable by graphics device = 2048M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
i915drmkms0: info: No connectors reported connected with modes
kern info: [drm] Cannot find any crtc or sizes - going 1024x768
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffd38066ba7000, size 1024x768, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)