Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-04-26 16:34:25
From: ganbold
Description: NanoPI R1
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #37 r345944M: Tue Apr 23 18:10:40 +08 2019
    tsgan@beastie:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module_register: cannot register ofwbus/pcib from kernel; already loaded from kernel
Module ofwbus/pcib failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
Module simplebus/pcib failed to register: 17
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features:
  Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
  PXN, LPAE, Coherent Walk
Optional instructions:
  SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory  = 1039556608 (991 MB)
avail memory = 998764544 (952 MB)
No PSCI/SMCCC call function found
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
aw_ccu0: <Allwinner Clock Control Unit> on ofwbus0
clk_fixed0: <Fixed clock> on aw_ccu0
clk_fixed1: <Fixed clock> on aw_ccu0
clk_fixed2: <Fixed clock> on aw_ccu0
simplebus0: <Flattened device tree simple bus> on ofwbus0
ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2afff irq 35 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iichb1: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b000-0x1c2b3ff irq 36 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iichb2: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b400-0x1c2b7ff irq 37 on simplebus0
iicbus2: <OFW I2C bus> on iichb2
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
regfix8: <Fixed Regulator> on ofwbus0
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 38 on simplebus0
gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 19,20 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 40,41 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 4 on simplebus0
a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 5 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 7 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 8 on simplebus0
mmc1: <MMC/SD bus> on aw_mmc1
aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 9 on simplebus0
mmc2: <MMC/SD bus> on aw_mmc2
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 11 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 13 on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci1
ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 14 on simplebus0
usbus2 on ohci0
ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 15 on simplebus0
usbus3: EHCI version 1.0
usbus3 on ehci2
ohci1: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 16 on simplebus0
usbus4 on ohci1
ehci3: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff irq 17 on simplebus0
usbus5: EHCI version 1.0
usbus5 on ehci3
ohci2: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 18 on simplebus0
usbus6 on ohci2
gpioc0: <GPIO controller> on gpio0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 23 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on miibus0
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
awg0: Ethernet address: xx:xx:xx:xx:xx:xx
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 26 on simplebus0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 31 on simplebus0
uart0: console (115384,n,8,1)
uart1: <16750 or compatible> mem 0x1c28400-0x1c287ff irq 32 on simplebus0
uart2: <16750 or compatible> mem 0x1c28800-0x1c28bff irq 33 on simplebus0
uart3: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 34 on simplebus0
ds13070: <Dallas DS1307 RTC> at addr 0xd0 on iicbus0
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iic2: <I2C generic I/O> on iicbus2
gpioc1: <GPIO controller> on gpio1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
ugen1.1: <Allwinner EHCI root HUB> at usbus1
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Generic OHCI root HUB> at usbus2
uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen3.1: <Allwinner EHCI root HUB> at usbus3
uhub3: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Generic OHCI root HUB> at usbus4
uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
ugen5.1: <Allwinner EHCI root HUB> at usbus5
uhub5: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <Generic OHCI root HUB> at usbus6
uhub6: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc0: No compatible cards found on bus
aw_mmc0: Spurious interrupt - no active request, rint: 0x00000004

AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc1: No compatible cards found on bus
aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004

AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_DATA_END_BIT_ERR
uhub1: 1 port with 1 removable, self powered
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc2: Failed to set VCCQ for card at relative address 2
mmcsd0: 8GB <MMCHC 8GTF4R 0.6 SN E743521F MFG 11/2018 by 21 0x0000> at mmc2 52.0MHz/8bit/32768-block
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 524kB partion 3 at mmcsd0
ds13070: cannot read from RTC.
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
uhub4: 1 port with 1 removable, self powered
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub6: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
uhub5: 1 port with 1 removable, self powered
ugen1.2: <Realtek USB 10/100 LAN> at usbus1
ugen5.2: <Realtek USB 10/100 LAN> at usbus5
lo0: link state changed to UP
awg0: link state changed to DOWN
awg0: link state changed to UP
ure0 on uhub5
ure0: <Realtek USB 10/100 LAN, class 0/0, rev 2.00/20.00, addr 2> on usbus5
ure1 on uhub0
ure1: <Realtek USB 10/100 LAN, class 0/0, rev 2.10/20.00, addr 2> on usbus1
ure1: MAC assigned randomly
miibus1: <MII bus> on ure0
rlphy0: <RTL8201E 10/100 media interface> PHY 0 on miibus1
miibus2: <MII bus> on ure1
rlphy1: <RTL8201E 10/100 media interface> PHY 0 on miibus2
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on ure0
rlphy1:  10baseT
ue0: Ethernet address: xx:xx:xx:xx:xx:xx
, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue1: <USB Ethernet> on ure1
ue1: Ethernet address: xx:xx:xx:xx:xx:xx
nd6_setmtu0: new link MTU on awg0 (576) is too small for IPv6
ue0: link state changed to DOWN
ue1: link state changed to DOWN
Security policy loaded: MAC/ntpd (mac_ntpd)