Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2019-04-29 09:31:27
From: nsouch
Description: NetASQ U70 firmware 8.0.3
U70XXA0D0937520: FW U70-A (S / EUROPE)
Firewall software version 8.0.3

port       name NS-BSD   state  address
   1        out   eth0 no-link
   2         in   eth1 no-link
   3       dmz1   eth2 no-link
   4       dmz2   eth3 no-link
   5       dmz3   eth4 no-link
   6       dmz4   eth5 no-link
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
NS-BSD 8.0.3- #0: Wed Oct  7 17:51:19 CEST 2009
memory: real:430 kmap:3075 ASQ:96 mbufs:7 (MB)
mbuf: maxsock:1864 nmbufs:5008 nmbclusters:3144 (limit nmbufs:4006 nmbclusters:2515)
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA/IDT Unknown (1000.01-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x6d0  Stepping = 0
real memory  = 468582400 (446 MB)
avail memory = 349888512 (333 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
PadLock: HW support loaded for AES-CBC,SHA1,SHA256.
acpi0: <CN700 AWRDACPI> on motherboard
    ACPI-0438: *** Error: Looking up [FAN_] in namespace, AE_NOT_FOUND
SearchNode 0x47e3a420 StartNode 0x47e3a420 ReturnNode 0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: no PRT entry for 0.1.INTA
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xdffff000-0xdffff3ff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f irq 20 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f irq 22 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f irq 23 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdfffe000-0xdfffe0ff irq 22 at device 16.4 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
*** Found VIA 8251 PCI-ISA bridge, trying to initialize the GPIO 
*** Found VIA 8251 PCI-ISA bridge, trying to initialize the GPIO 
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 20 at device 0.0 on pci128
pci129: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 22 at device 0.1 on pci128
pci130: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xbf00-0xbf1f mem 0xcfde0000-0xcfdfffff irq 16 at device 0.0 on pci130
em0: Ethernet address: xx:xx:xx:xx:xx:xx
speaker0: <PC speaker> port 0x61 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
Timecounter "TSC" frequency 1000009215 Hz quality 800
Timecounters tick every 1.000 msec
VIA 82xx GPIO initialized
Fast IPsec: Initialized Security Association Processing.
crypto_proc: Thread 0 started.
ad0: 488MB <STI Flash 8.0.0 01/17/07> at ata0-master WDMA2
pollng: using 1 cpu(s)
pollng: creating taskqueue for cpu0
WARNING: / was not properly dismounted
Mounted root from ufs:/dev/ad0s1a
ASQ engine v4.0.0
96Mb total memory
66Mb available for dynamic allocator