Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-01 14:20:08
From: nullnilaki
Description: NetBSD/alpha 8.99.37 on AlphaServer DS25
P00>>>boot dka100
Initializing...
OpenVMS PALcode V1.98-43, Tru64 UNIX PALcode V1.92-33
*** keyboard not plugged in...
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 222000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
2048 MB of System Memory
Testing Memory
...
probe I/O subsystem
Hose 0 - PCI bus running at 33Mhz
entering idle loop
Hose 1 - PCI bus running at 66Mhz
Hose 2 - PCI bus running at 66Mhz
Hose 3 - PCI bus running at 66Mhz
starting drivers
*** Warning - No AC detected on Power Supply 0 ***
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 1000 MHz
create powerup
initializing GCT/FRU at 24a000
Initializing ega dqa dqb eia pga open fibre pga0.0.0.2.1
pgb open fibre pgb0.0.0.2.3
pka pkb
Memory Testing and Configuration Status
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
0 2048Mb 0000000000000000 1-Way
2048 MB of System Memory
Testing the System
Testing the Disks (read only)
pga0.0.0.2.1 Link is down.
Testing the Network
pgb0.0.0.2.3 Link is down.
AlphaServer DS25 Console V7.1-2, built on Dec 7 2005 at 15:28:44
CPU 0 booting
(boot dka100.1.0.1.2 -flags A)
block 0 of dka100.1.0.1.2 is a valid boot block
reading 13 blocks from dka100.1.0.1.2
bootstrap code read in
base = 31a000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 7fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 8.0 FFS Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 8.0 Secondary Bootstrap, Revision 1.13 (Tue Jul 17 14:59:51 UTC 2018)
VMS PAL rev: 0x2002b00010162
OSF PAL rev: 0x200210002015c
Switch to OSF PAL code succeeded.
Boot flags: A
11583040+256096 [634776+421236]=0xc4cb08
Entering netbsd at 0xfffffc0000a01270...
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.37 (GENERIC-$Revision: 1.393 $) #0: Wed May 1 14:07:04 UTC 2019
[ 1.0000000] naruaki@:/usr/obj.alpha/sys/arch/alpha/compile/GENERIC.MP
[ 1.0000000] AlphaServer DS25, 1000MHz, s/n AY25202439
[ 1.0000000] 8192 byte page size, 2 processors.
[ 1.0000000] total memory = 2048 MB
[ 1.0000000] (3248 KB reserved for PROM, 2044 MB used by NetBSD)
[ 1.0000000] avail memory = 2004 MB
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264C-5
[ 1.0000000] cpu0: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
[ 1.0000000] cpu1 at mainbus0: ID 1, 21264C-5
[ 1.0000000] cpu1: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
[ 1.0000000] tsc0 at mainbus0: 21274 Core Logic Chipset, Cchip rev 0
[ 1.0000000] tsc0: 8 Dchips, 2 memory buses of 32 bytes
[ 1.0000000] tsc0: arrays present: 2048MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
[ 1.0000000] tsp0 at tsc0
[ 1.0000000] pci0 at tsp0 bus 0
[ 1.0000000] sio0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0xc3)
[ 1.0000000] fxp0 at pci0 dev 8 function 0: Intel i82559ER Ethernet (rev. 0x09)
[ 1.0000000] fxp0: interrupting at dec 6600 irq 20
[ 1.0000000] fxp0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
[ 1.0000000] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] vendor 1011 product 0018 (miscellaneous network, revision 0x25) at pci0 dev 10 function 0 not configured
[ 1.0000000] vendor 0e11 product a0f7 (PCI Hot-Plug system, revision 0x12) at pci0 dev 12 function 0 not configured
[ 1.0000000] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
[ 1.0000000] aceride0: primary channel interrupting at isa irq 14
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] aceride0: secondary channel interrupting at isa irq 15
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] isa0 at sio0
[ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.0000000] com0: console
[ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[ 1.0000000] pckbc0 at isa0 port 0x60-0x64
[ 1.0000000] attimer0 at isa0 port 0x40-0x43
[ 1.0000000] pcppi0 at isa0 port 0x61
[ 1.0000000] spkr0 at pcppi0: PC Speaker
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] midi0 at pcppi0: PC speaker
[ 1.0000000] isabeep0 at pcppi0
[ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[ 1.0000000] attimer0: attached to pcppi0
[ 1.0000000] tsp1 at tsc0
[ 1.0000000] pci1 at tsp1 bus 0
[ 1.0000000] ahc0 at pci1 dev 1 function 0: Adaptec aic7899 Ultra160 SCSI adapter
[ 1.0000000] ahc0: interrupting at dec 6600 irq 0
[ 1.0000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[ 1.0000000] ahc1 at pci1 dev 1 function 1: Adaptec aic7899 Ultra160 SCSI adapter
[ 1.0000000] ahc1: interrupting at dec 6600 irq 1
[ 1.0000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[ 1.0000000] bge0 at pci1 dev 5 function 0: Broadcom BCM5703X Gigabit Ethernet
[ 1.0000000] bge0: interrupting at dec 6600 irq 4
[ 1.0000000] bge0: HW config 00000014, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] tsp2 at tsc0
[ 1.0000000] pci2 at tsp2 bus 0
[ 1.0000000] vendor 10df product f900 (Fiber Channel serial bus, revision 0x01) at pci2 dev 2 function 0 not configured
[ 1.0000000] tsp3 at tsc0
[ 1.0000000] pci3 at tsp3 bus 0
[ 1.0000000] vendor 10df product f900 (Fiber Channel serial bus, revision 0x01) at pci3 dev 2 function 0 not configured
[ 1.0000000] vendor 0e11 product a0f7 (PCI Hot-Plug system, revision 0x12) at pci3 dev 6 function 0 not configured
[ 1.0000000] tsciic0 at tsc0
[ 1.0000000] iic0 at tsciic0: I2C bus
[ 1.1358829] stray isa irq 14
[ 1.1688761] scsibus0: waiting 2 seconds for devices to settle...
[ 1.2403707] scsibus1: waiting 2 seconds for devices to settle...
[ 1.3126364] atapibus0 at atabus0: 2 targets
[ 1.4220055] cd0 at atapibus0 drive 0: <HL-DT-ST GCE-8320B, , 2.04> cdrom removable
[ 5.4379407] sd0 at scsibus0 target 1 lun 0: <COMPAQ, BD07286224, HPB6> disk fixed
[ 5.5287579] sd0: 69464 MB, 47996 cyl, 4 head, 741 sec, 512 bytes/sect x 142264000 sectors
[ 5.6273874] sd0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing
[ 12.9132806] root on sd0a dumps on sd0b
[ 12.9630835] root file system type: ffs
[ 13.0061751] kern.module.path=/stand/alpha/8.99.37/modules
Wed May 1 14:00:58 UTC 2019
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
[ 13.7286833] stray isa irq 14
[ 14.0704687] WARNING: negative runtime; monotonic clock has gone backwards
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
May 1 14:01:05 postfix[356]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Wed May 1 14:01:06 UTC 2019
NetBSD/alpha (Amnesiac) (console)
login: