Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-01 16:50:22
From: nullnilaki
Description: NetBSD/alpha 8.0 on AlphaStation XP1000
>>>boot dka100
(boot dka100.1.0.6.1 -flags A)
block 0 of dka100.1.0.6.1 is a valid boot block
reading 13 blocks from dka100.1.0.6.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1a00
initializing HWRPB at 2000
initializing page table at 1ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 8.0 FFS Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 8.0 Secondary Bootstrap, Revision 1.13 (Tue Jul 17 14:59:51 UTC 2018)
VMS PAL rev: 0x1001b00010158
OSF PAL rev: 0x1001600020153
Switch to OSF PAL code succeeded.
Boot flags: A
11899872+258576 [643752+421371]=0xc9cdf0
Entering netbsd at 0xfffffc0000a01220...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
COMPAQ Professional Workstation XP1000, 500MHz, s/n
8192 byte page size, 1 processor.
total memory = 512 MB
(2128 KB reserved for PROM, 509 MB used by NetBSD)
avail memory = 490 MB
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264-5
cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 4 Dchips, 1 memory bus of 32 bytes
tsc0: arrays present: 512MB (split), 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
sio0 at pci0 dev 7 function 0: vendor 1080 product c693 (rev. 0x00)
cypide0 at pci0 dev 7 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
cypide0: primary channel wired to compatibility mode
cypide0: primary channel interrupting at isa irq 14
atabus0 at cypide0 channel 0
cypide1 at pci0 dev 7 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
cypide1: hardware does not support DMA
cypide1: primary channel wired to compatibility mode
cypide1: secondary channel interrupting at isa irq 15
atabus1 at cypide1 channel 0
ohci0 at pci0 dev 7 function 3: vendor 1080 product c693 (rev. 0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
pm2fb0 at pci0 dev 12 function 0: vendor 104c product 3d07 (rev. 0x01)
pm2fb0: no width property
pm2fb0: no height property
pm2fb0: no depth property
pm2fb0: 8 MB aperture at 0x01000000
pm2fb0: pm2 using 1024 x 768 in 8 bit, stride 1024
wsdisplay1 at pm2fb0 kbdmux 1
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, playback, capture, mmap, independent
sb0: Virtual format configured - Format SLINEAR, precision 8, channels 1, frequency 8000
sb0: Latency: 192 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi2 at pcppi0: PC speaker
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
tsp1 at tsc0
pci1 at tsp1 bus 0
tlp0 at pci1 dev 3 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at dec 6600 irq 45
tlp0: DEC, Ethernet address [_MAC_XXXXXXXXXX]
tlp0: 10baseT, 10base2, 10base5, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isp0 at pci1 dev 6 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at dec 6600 irq 47
ppb0 at pci1 dev 8 function 0: vendor 1011 product 0024 (rev. 0x03)
pci2 at ppb0 bus 2
esiop0 at pci2 dev 9 function 0: Symbios Logic 53c895 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at dec 6600 irq 28
scsibus0 at esiop0: 16 targets, 8 luns per target
tsciic0 at tsc0
iic0 at tsciic0: I2C bus
esiop0: switching to single-ended mode
scsibus0: waiting 2 seconds for devices to settle...
scsibus1 at isp0: 16 targets, 8 luns per target
atapibus0 at atabus0: 2 targets
scsibus1: waiting 2 seconds for devices to settle...
cd0 at atapibus0 drive 0: <JLMS XJ-HD166S, , D3S4> cdrom removable
uhub0 at usb0: vendor 1080 (0x1080) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
cd1 at scsibus0 target 3 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> cdrom removable
cd1: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers
sd0 at scsibus1 target 1 lun 0: <ATA, TS32GCF133, 2014> disk fixed
sd0: 30535 MB, 15510 cyl, 64 head, 63 sec, 512 bytes/sect x 62537328 sectors
sd0: sync (50.00ns offset 8), 8-bit (20.000MB/s) transfers, tagged queueing
WARNING: 3 errors while detecting hardware; check system log.
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/alpha/8.0/modules
Tue Jul 17 15:16:12 UTC 2018
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: tlp0.
Adding interface aliases:.
add net default: gateway[_IP_XXXXXX]
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Jul 17 15:16:24 postfix[407]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Tue Jul 17 15:16:25 UTC 2018
NetBSD/alpha (Amnesiac) (console)
login: