Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-03 07:06:59
From: nullnilaki
Description: NetBSD/macppc 8.99.37 AUDIO2 on PowerMac G4 Mirrored Drive Doors and Ensoniq AudioPCI
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 8.99.37 (GENERIC) #2: Wed May  1 19:12:51 UTC 2019
[   1.0000000]  naruaki@:/usr/obj.macppc/sys/arch/macppc/compile/GENERIC
[   1.0000000] total memory = 256 MB
[   1.0000000] avail memory = 233 MB
[   1.0000000] timecounter: Timecounters tick every 10.000 msec
[   1.0000000] Kernelized RAIDframe activated
[   1.0000000] found openpic PIC at 80040000
[   1.0000000] OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
[   1.0000000] bootpath: /pci@f4000000/ata-6@d/disk@0:2/netbsd
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: 7455 (Revision 2.1), ID 0 (primary)
[   1.0000000] cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1
[   1.0000000] cpu0: 1000.00 MHz, 256KB L2 cache no parity, 1MB no-parity L3 cache (DDR SRAM) at 4:1 ratio
[   1.0000000] cpu1 at mainbus0: ID 1
[   1.0000000] cpu1: processor off-line; multiprocessor support not present in kernel
[   1.0000000] memory0 at mainbus0: len=512
[   1.0000000] spdmem0 at memory0
[   1.0000000] spdmem0: DDR SDRAM, no parity or ECC, 256MB, 333MHz (PC-2700)
[   1.0000000] spdmem0: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 6.0ns cycle time
[   1.0000000] spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
[   1.0000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[   1.0000000] uni_n0 at mainbus0 address 0xf8000000
[   1.0000000] ki2c0 at uni_n0 address 0xf8001000
[   1.0000000] iic0 at ki2c0: I2C bus
[   1.0000000] dbcool0 at iic0 addr 0x2c
[   1.0000000] dbcool0: ADM1030 dBCool(tm) Controller (rev 0x0083)
[   1.0000000] i2c-hwclock at iic0 addr 0x65 not configured
[   1.0000000] admtemp0 at iic0 addr 0x49: LM84 temperature sensor: id. 0x4b, rev. 0x00
[   1.0000000] uninorth0 at mainbus0
[   1.0000000] pci0 at uninorth0 bus 0
[   1.0000000] pci0: i/o space, memory space enabled
[   1.0000000] pchb0 at pci0 dev 11 function 0
[   1.0000000] pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
[   1.0000000] radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9000/PRO If (rev. 0x00)
[   1.0000000] trying to read disabled BIOS...
[   1.0000000] radeonfb0: No video BIOS, using default clocks
[   1.0000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
[   1.0000000] radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
[   1.0000000] radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
[   1.0000000] radeonfb0: using 32 MB per display
[   1.0000000] radeonfb0: port 0: physical 1280x1024 60Hz
[   1.0000000] radeonfb0: port 1: physical 1280x1024 60Hz
[   1.0000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
[   1.0000000] wsmux1: connecting to wsdisplay0
[   1.0000000] drm at radeonfb0 not configured
[   1.0000000] uninorth1 at mainbus0
[   1.0000000] pci1 at uninorth1 bus 0
[   1.0000000] pci1: i/o space, memory space enabled
[   1.0000000] pchb1 at pci1 dev 11 function 0
[   1.0000000] pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[   1.0000000] ahc0 at pci1 dev 18 function 0: Adaptec 29160 Ultra160 SCSI adapter
[   1.0000000] ahc0: interrupting at irq 52
[   1.0000000] ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[   1.0000000] eap0 at pci1 dev 21 function 0: Ensoniq AudioPCI 97 ES1371-B (rev. 0x09)
[   1.0000000] eap0: interrupting at irq 58
[   1.0000000] eap0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
[   1.0000000] eap0: ac97: ext id 0x200<AMAP>
[   1.0000000] audio0 at eap0: full duplex, playback, capture, mmap, independent
[   1.0000000] audio0: use new query_format method
[   1.0000000] audio0: use new query_format method
[   1.0000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 40ms for playback
[   1.0000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 40ms for recording
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] midi0 at eap0: AudioPCI MIDI UART
[   1.0000000] obio0 at pci1 dev 23 function 0: addr 0x80000000
[   1.0000000] obio0: enabling KeyLargo internal modem
[   1.0000000] zsc0 at obio0 irq 22,23
[   1.0000000] zstty0 at zsc0 channel 0
[   1.0000000] zstty1 at zsc0 channel 1
[   1.0000000] snapper0 at obio0 offset 0x10000: irq 30,1,2
[   1.0000000] pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
[   1.0000000] pmu0: initializing IIC bus
[   1.0000000] iic1 at pmu0: I2C bus
[   1.0000000] i2c-hwclock at iic1 addr 0x6a not configured
[   1.0000000] i2c-hwclock at iic1 addr 0x64 not configured
[   1.0000000] pmu0: initializing RTC
[   1.0000000] pmu0: power-mgt not configured
[   1.0000000] ki2c1 at obio0
[   1.0000000] iic2 at ki2c1: I2C bus
[   1.0000000] deq0 at iic2 addr 0x35 Audio Codec (tas3004)
[   1.0000000] wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer
[   1.0000000] atabus0 at wdc0 channel 0
[   1.0000000] wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer
[   1.0000000] atabus1 at wdc1 channel 0
[   1.0000000] snapper0: codec: TAS3004
[   1.0000000] audio1 at snapper0: full duplex, playback, capture, mmap
[   1.0000000] audio1: use new query_format method
[   1.0000000] audio1: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 21ms for playback
[   1.0000000] audio1: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 21ms for recording
[   1.0000000] spkr1 at audio1: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr1 not configured
[   1.0000000] ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
[   1.0000000] ohci0: interrupting at irq 27
[   1.0000000] ohci0: OHCI version 1.0
[   1.0000000] usb0 at ohci0: USB revision 1.0
[   1.0000000] ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
[   1.0000000] ohci1: interrupting at irq 28
[   1.0000000] ohci1: OHCI version 1.0
[   1.0000000] usb1 at ohci1: USB revision 1.0
[   1.0000000] uninorth2 at mainbus0
[   1.0000000] pci2 at uninorth2 bus 0
[   1.0000000] pci2: i/o space, memory space enabled
[   1.0000000] pchb2 at pci2 dev 11 function 0
[   1.0000000] pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[   1.0000000] wdc2 at pci2 dev 13 function 0: interrupting at irq 39
[   1.0000000] atabus2 at wdc2 channel 0
[   1.0000000] fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x01)
[   1.0000000] fwohci0: interrupting at irq 40
[   1.0000000] fwohci0: OHCI version 1.10 (ROM=0)
[   1.0000000] fwohci0: No. of Isochronous channels is 8.
[   1.0000000] fwohci0: EUI64 xx:xx:xx:xx:xx:xx:00:70
[   1.0000000] fwohci0: Phy 1394a available S400, 3 ports.
[   1.0000000] fwohci0: Link S400, max_rec 2048 bytes.
[   1.0000000] ieee1394if0 at fwohci0: IEEE1394 bus
[   1.0000000] fwip0 at ieee1394if0: IP over IEEE1394
[   1.0000000] fwohci0: Initiate bus reset
[   1.0000000] fwohci0: Clear PME# now
[   1.0000000] gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x00)
[   1.0000000] gem0: interrupting at irq 41
[   1.0000000] brgphy0 at gem0 phy 0: BCM5421 1000BASE-T media interface, rev. 1
[   1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] gem0: Ethernet address xx:xx:xx:xx:xx:xx, 10KB RX fifo, 4KB TX fifo
[   1.0000000] vmmask 59df0000 schedmask 7fff0000 highmask 7fff0000
[   1.0000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[   1.0000030] timecounter: Timecounter "mftb" frequency 41657778 Hz quality 100
[   1.0000158] fwohci0: BUS reset
[   1.0000158] fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
[   1.0000158] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[   1.0000158] ieee1394if0: bus manager 0
[   1.0099966] scsibus0: waiting 2 seconds for devices to settle...
[   1.0399952] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.0399952] uhub0: 2 ports with 2 removable, self powered
[   1.0399952] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   1.0399952] uhub1: 2 ports with 2 removable, self powered
[   1.0399952] IPsec: Initialized Security Association Processing.
[   1.1199946] atapibus0 at atabus1: 2 targets
[   1.1199946] cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-104, MBGDC181837WL, A227> cdrom removable
[   1.1299959] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[   1.1299959] cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
[   3.3099910] uhidev0 at uhub0 port 1 configuration 1 interface 0
[   3.3099910] uhidev0: FujitsuTakamisawaComponent (0x430) USBkeyboard (0x09), rev 1.10/1.01, addr 2, iclass 3/1
[   3.3199913] ukbd0 at uhidev0
[   3.7299900] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[   4.1199894] wd0 at atabus2 drive 0
[   4.1199894] wd0: <IBM-IC35L080AVVA07-0>
[   4.1199894] wd0: drive supports 16-sector PIO transfers, LBA addressing
[   4.1199894] wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
[   4.1499899] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[   4.1499899] wd0(wdc2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[   6.8499852] swwdog0: software watchdog initialized
[   6.8599862] boot device: wd0
[   6.8599862] root on wd0a dumps on wd0b
[   6.8699868] root file system type: ffs
[   6.8699868] kern.module.path=/stand/macppc/8.99.37/modules