Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-03 18:44:51
From: nullnilaki
Description: NetBSD/alpha 8.99.37 AUDIO2 on COMPAQ Professional Workstation XP1000 and Sound Blaster Pro audio device(emulated by ES1887)
>>>boot dka100
(boot dka100.xxx.xxx.xxx.xxx -flags A)
block 0 of dka100.xxx.xxx.xxx.xxx is a valid boot block
reading 13 blocks from dka100.xxx.xxx.xxx.xxx
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1a00
initializing HWRPB at 2000
initializing page table at 1ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/alpha 8.0 FFS Primary Bootstrap
Jumping to entry point...

NetBSD/alpha 8.0 Secondary Bootstrap, Revision 1.13 (Tue Jul 17 14:59:51 UTC 2018)

VMS PAL rev: 0x1001b00010158
OSF PAL rev: 0x1001600020153
Switch to OSF PAL code succeeded.

Boot flags: A
11499952+250144 [654672+429124]=0xc3dbc0

Entering netbsd at 0xfffffc0000a011a0...
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 8.99.37 (GENERIC-$Revision: 1.393 $) #2: Fri May  3 18:14:26 UTC 2019
[   1.0000000] 	naruaki@:/usr/obj.alpha/sys/arch/alpha/compile/GENERIC
[   1.0000000] COMPAQ Professional Workstation XP1000, 500MHz, s/n 
[   1.0000000] 8192 byte page size, 1 processor.
[   1.0000000] total memory = 512 MB
[   1.0000000] (2128 KB reserved for PROM, 509 MB used by NetBSD)
[   1.0000000] avail memory = 490 MB
[   1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264-5
[   1.0000000] cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
[   1.0000000] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
[   1.0000000] tsc0: 4 Dchips, 1 memory bus of 32 bytes
[   1.0000000] tsc0: arrays present: 512MB (split), 0MB, 0MB, 0MB, Dchip 0 rev 1
[   1.0000000] tsp0 at tsc0
[   1.0000000] pci0 at tsp0 bus 0
[   1.0000000] sio0 at pci0 dev 7 function 0: vendor 1080 product c693 (rev. 0x00)
[   1.0000000] cypide0 at pci0 dev 7 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
[   1.0000000] cypide0: primary channel wired to compatibility mode
[   1.0000000] cypide0: primary channel interrupting at isa irq 14
[   1.0000000] atabus0 at cypide0 channel 0
[   1.0000000] cypide1 at pci0 dev 7 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
[   1.0000000] cypide1: hardware does not support DMA
[   1.0000000] cypide1: primary channel wired to compatibility mode
[   1.0000000] cypide1: secondary channel interrupting at isa irq 15
[   1.0000000] atabus1 at cypide1 channel 0
[   1.0000000] ohci0 at pci0 dev 7 function 3: vendor 1080 product c693 (rev. 0x00)
[   1.0000000] ohci0: interrupting at isa irq 10
[   1.0000000] ohci0: OHCI version 1.0, legacy support
[   1.0000000] usb0 at ohci0: USB revision 1.0
[   1.0000000] vga0 at pci0 dev 11 function 0: vendor 104c product 3d07 (rev. 0x01)
[   1.0000000] wsdisplay1 at vga0 kbdmux 1
[   1.0000000] drm at vga0 not configured
[   1.0000000] isa0 at sio0
[   1.0000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7
[   1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[   1.0000000] pckbc0 at isa0 port 0x60-0x64
[   1.0000000] attimer0 at isa0 port 0x40-0x43
[   1.0000000] sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
[   1.0000000] audio0 at sb0: half duplex, playback, capture, mmap
[   1.0000000] audio0: slinear_le:16 -> ulinear_le:8 2ch 20000Hz, blk 40ms for playback
[   1.0000000] audio0: slinear_le:16 <- ulinear_le:8 2ch 20000Hz, blk 40ms for recording
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] midi0 at sb0: SB MIDI UART
[   1.0000000] opl0 at sb0: model OPL3
[   1.0000000] midi1 at opl0: SB Yamaha OPL3
[   1.0000000] pcppi0 at isa0 port 0x61
[   1.0000000] spkr1 at pcppi0: PC Speaker
[   1.0000000] wsbell at spkr1 not configured
[   1.0000000] midi2 at pcppi0: PC speaker
[   1.0000000] isabeep0 at pcppi0
[   1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[   1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[   1.0000000] attimer0: attached to pcppi0
[   1.0000000] tsp1 at tsc0
[   1.0000000] pci1 at tsp1 bus 0
[   1.0000000] tlp0 at pci1 dev 3 function 0: DECchip 21143 Ethernet, pass 4.1
[   1.0000000] tlp0: interrupting at dec 6600 irq 45
[   1.0000000] tlp0: DEC, Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000000] tlp0: 10baseT, 10base2, 10base5, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] isp0 at pci1 dev 6 function 0: QLogic 1020 Fast Wide SCSI HBA
[   1.0000000] isp0: interrupting at dec 6600 irq 47
[   1.0000000] ppb0 at pci1 dev 8 function 0: vendor 1011 product 0024 (rev. 0x03)
[   1.0000000] pci2 at ppb0 bus 2
[   1.0000000] esiop0 at pci2 dev 9 function 0: Symbios Logic 53c895 (ultra2-wide scsi)
[   1.0000000] esiop0: using on-board RAM
[   1.0000000] esiop0: interrupting at dec 6600 irq 28
[   1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[   1.0000000] tsciic0 at tsc0
[   1.0000000] iic0 at tsciic0: I2C bus
[   1.0000000] esiop0: switching to single-ended mode
[   1.1416544] scsibus0: waiting 2 seconds for devices to settle...
[   1.2119829] scsibus1 at isp0: 16 targets, 8 luns per target
[   1.2785425] atapibus0 at atabus0: 2 targets
[   1.3330578] scsibus1: waiting 2 seconds for devices to settle...
[   1.4034636] cd0 at atapibus0 drive 0: <JLMS XJ-HD166S, , D3S4> cdrom removable
[   1.4902840] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[   4.0167709] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
[   4.2267287] cd1 at scsibus0 target 3 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> cdrom removable
[   4.3274676] cd1: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers
[  12.3135211] sd0 at scsibus1 target 1 lun 0: <ATA, TS16GCF133, 2014> disk fixed
[  12.4014089] sd0: 15279 MB, 7761 cyl, 64 head, 63 sec, 512 bytes/sect x 31293360 sectors
[  12.5000410] sd0: sync (50.00ns offset 8), 8-bit (20.000MB/s) transfers, tagged queueing
[  15.8574119] root on sd0a dumps on sd0b
[  15.9072161] root file system type: ffs
[  15.9521363] kern.module.path=/stand/alpha/8.99.37/modules
Tue Mar  6 03:46:50 UTC 2068
Starting root file system check:
/dev/rsd0a: 7144 files, 174807 used, 3954960 free (1488 frags, 494184 blocks, 0.0% fragmentation)
/dev/rsd0a: MARKING FILE SYSTEM CLEAN
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: tlp0.
Adding interface aliases:.
add net default: gateway xxx.xxx.xxx.xxx
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Mar  6 03:47:20  postfix[381]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/postfix
See /var/run/rc.log for more information.
Tue Mar  6 03:47:22 UTC 2068

NetBSD/alpha (Amnesiac) (console)

login: