Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-03 21:29:48
From: nullnilaki
Description: NetBSD/sgimips 8.99.37 AUDIO2 on silicon graphics O2 plus
NetBSD/sgimips 8.0 Bootstrap, Revision 1.5 (Tue Jul 17 14:59:51 UTC 2018)

devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
7534544+131344 [386288+378075]=0x80a938
[   1.0000000] phys segment: 0xe000 @ 0x2000
[   1.0000000] adding 0xe000 @ 0x2000 to freelist 0
[   1.0000000] phys segment: 0xd40000 @ 0x10000
[   1.0000000] adding 0x56000 @ 0x10000 to freelist 0
[   1.0000000] adding 0x4e4000 @ 0x86c000 to freelist 0
[   1.0000000] phys segment: 0xec00000 @ 0x1400000
[   1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 8.99.37 (GENERIC32_IP3x) #0: Fri May  3 21:23:18 UTC 2019
[   1.0000000] 	naruaki@:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP3x
[   1.0000000] total memory = 255 MB
[   1.0000000] (6848 KB reserved for ARCS)
[   1.0000000] avail memory = 238 MB
[   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 5], 1 processor
[   1.0000000] cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 1024KB/32B direct-mapped write-through L2 unified cache
[   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
[   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
[   1.0000000] crmfb0: device unusable if not setup by firmware
[   1.0000000] mace0 at mainbus0 addr 0x1f000000
[   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
[   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
[   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
[   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
[   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
[   1.0000000] mec0: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000000] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1
[   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
[   1.0000000] audio0 at mavb0: full duplex, playback, mmap, independent
[   1.0000000] audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 40ms for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
[   1.0000000] pci0 at macepci0 bus 0
[   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc0: interrupting at crime interrupt 8
[   1.0000000] ahc0: Using left over BIOS settings
[   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc1: interrupting at crime interrupt 9
[   1.0000000] ahc1: Using left over BIOS settings
[   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   1.0714971] scsibus1: waiting 2 seconds for devices to settle...
[   3.1437433] sd0 at scsibus0 target 1 lun 0: <IBM, DNES-318350Y, SA30> disk fixed
[   3.3014131] sd0: 17501 MB, 11474 cyl, 10 head, 312 sec, 512 bytes/sect x 35843670 sectors
[   3.4009672] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
[   4.0337145] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1F09> cdrom removable
[   4.1350131] cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[  11.0520493] WARNING: 1 error while detecting hardware; check system log.
[  11.1376312] boot device: sd0
[  11.2421855] root on sd0a dumps on sd0b
[  11.3039846] root file system type: ffs
[  11.3550461] kern.module.path=/stand/sgimips/8.99.37/modules
Fri May  3 21:15:10 UTC 2019
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: mec0.
Adding interface aliases:.
add net default: gateway xxx.xxx.xxx.xxx
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
May  3 21:15:45  postfix[387]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/postfix
See /var/run/rc.log for more information.
Fri May  3 21:15:46 UTC 2019

NetBSD/sgimips (Amnesiac) (console)

login: root
May  3 21:15:52  login: ROOT LOGIN (root) on tty console
Last login: Fri May  3 21:05:15 2019 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.37 (GENERIC32_IP3x) #0: Fri May 3 21:23:18 UTC 2019

Welcome to NetBSD!