Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-03 22:32:59
From: nullnilaki
Description: OpenBSD/sgi 6.5 on silicon graphics O2 plus
> boot
40432+2592 entry: 0x80010120

OpenBSD/sgi-IP32 ARCBios boot version 1.9
arg 0: scsi(0)disk(1)rdisk(0)partition(8)/boot
arg 1: ConsoleIn=serial(0)
arg 2: ConsoleOut=serial(0)
arg 3: SystemPartition=scsi(0)disk(1)rdisk(0)partition(8)
arg 4: OSLoader=boot
arg 5: OSLoadPartition=scsi(0)disk(1)rdisk(0)partition(0)
arg 6: OSLoadFilename=/bsd
arg 7: OSLoadOptions=auto
Boot: scsi(0)disk(1)rdisk(0)partition(0)/bsd
6676776+654776 [117+88+394104+245402]=0x0
ARCS32 Firmware Version 1.10
Found SGI-IP32, setting up.
Initial setup done, switching console.
[ using 640488 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.5 (GENERIC-IP32) #5: Sun Apr 14 12:32:27 MDT 2019
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/sgi/compile/GENERIC-IP32
real mem = 671088640 (640MB)
rsvd mem = 7020544 (7MB)
avail mem = 632619008 (603MB)
mainbus0 at root: O2
cpu0 at mainbus0: PMC-Sierra RM52X0 CPU rev 10.0 300 MHz, RM52X0 FPC rev 10.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB direct
clock0 at mainbus0: int 5
macebus0 at mainbus0: crime rev 10.1
com0 at macebus0 base 0x00390000 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at macebus0 base 0x00398000 irq 4: ns16550a, 16 byte fifo
dsrtc0 at macebus0 base 0x003a0000: DS1687
macepcibr0 at macebus0 base 0x00080000 irq 7: mace rev 1
pci0 at macepcibr0 bus 0
ahc0 at pci0 dev 1 function 0 "Adaptec AIC-7880" rev 0x00: irq 8
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 1 lun 0: <IBM, DNES-318350Y, SA30> SCSI3 0/direct fixed serial.IBM_DNES-318350Y_AKLR3235
sd0: 17501MB, 512 bytes/sector, 35843670 sectors
cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1F09> SCSI2 5/cdrom removable
ahc1 at pci0 dev 2 function 0 "Adaptec AIC-7880" rev 0x00: irq 9
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus1 at ahc1: 16 targets, initiator 7
mavb0 at macebus0 base 0x00300000 irq 6: AD1843 rev 1
audio0 at mavb0
mec0 at macebus0 base 0x00280000 irq 3: MAC-110 rev 1, address [_MAC_XXXXXXXXXX]
nsphy0 at mec0 phy 8: DP83840 10/100 PHY, rev. 1
mkbc0 at macebus0 base 0x00320000 irq 5
power0 at macebus0 irq 5
gbe0 at mainbus0: device has not been setup by firmware!
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
boot device: sd0
root on sd0a (9ed89d8bae400e9b.a) swap on sd0b dump on sd0b
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
Automatic boot in progress: starting file system checks.
/dev/sd0a (9ed89d8bae400e9b.a): file system is clean; not checking
pf enabled
starting network
reordering libraries: done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.5/
No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Sat May  4 07:25:26 JST 2019

OpenBSD/sgi (o2plus.my.domain) (console)