Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-05-04 10:10:58
From: nullnilaki
Description: NetBSD/sgimips 8.99.37 AUDIO2 on silicon graphics O2 plus
> boot
52256+1792 entry: 0x80002000
NetBSD/sgimips 8.0 Bootstrap, Revision 1.5 (Tue Jul 17 14:59:51 UTC 2018)
devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
7534544+131344 [386288+378075]=0x80a938
[ 1.0000000] phys segment: 0xe000 @ 0x2000
[ 1.0000000] adding 0xe000 @ 0x2000 to freelist 0
[ 1.0000000] phys segment: 0xd40000 @ 0x10000
[ 1.0000000] adding 0x56000 @ 0x10000 to freelist 0
[ 1.0000000] adding 0x4e4000 @ 0x86c000 to freelist 0
[ 1.0000000] phys segment: 0xec00000 @ 0x1400000
[ 1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.37 (GENERIC32_IP3x) #0: Sat May 4 09:53:58 UTC 2019
[ 1.0000000] naruaki@:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP3x
[ 1.0000000] total memory = 255 MB
[ 1.0000000] (6848 KB reserved for ARCS)
[ 1.0000000] avail memory = 238 MB
[ 1.0000000] mainbus0 (root): SGI-IP32 [SGI, 5], 1 processor
[ 1.0000000] cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
[ 1.0000000] cpu0: 48 TLB entries, 16MB max page size
[ 1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[ 1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[ 1.0000000] cpu0: 1024KB/32B direct-mapped write-through L2 unified cache
[ 1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
[ 1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
[ 1.0000000] crmfb0: device unusable if not setup by firmware
[ 1.0000000] mace0 at mainbus0 addr 0x1f000000
[ 1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
[ 1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
[ 1.0000000] com0: console
[ 1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
[ 1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
[ 1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
[ 1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
[ 1.0000000] mec0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1
[ 1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
[ 1.0000000] audio0 at mavb0: full duplex, playback, mmap, independent
[ 1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 40ms for playback
[ 1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
[ 1.0000000] pci0 at macepci0 bus 0
[ 1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
[ 1.0000000] ahc0: interrupting at crime interrupt 8
[ 1.0000000] ahc0: Using left over BIOS settings
[ 1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
[ 1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[ 1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[ 1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
[ 1.0000000] ahc1: interrupting at crime interrupt 9
[ 1.0000000] ahc1: Using left over BIOS settings
[ 1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
[ 1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[ 1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[ 1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[ 1.0714750] scsibus1: waiting 2 seconds for devices to settle...
[ 3.1437208] sd0 at scsibus0 target 1 lun 0: <IBM, DNES-318350Y, SA30> disk fixed
[ 3.3012820] sd0: 17501 MB, 11474 cyl, 10 head, 312 sec, 512 bytes/sect x 35843670 sectors
[ 3.4020925] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
[ 4.0348398] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1F09> cdrom removable
[ 4.1361381] cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[ 11.0531759] WARNING: 1 error while detecting hardware; check system log.
[ 11.1389550] boot device: sd0
[ 11.2435088] root on sd0a dumps on sd0b
[ 11.3052060] root file system type: ffs
[ 11.3568939] kern.module.path=/stand/sgimips/8.99.37/modules
Sat May 4 10:02:24 UTC 2019
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: mec0.
Adding interface aliases:.
add net default: gateway[_IP_XXXXXX]
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
May 4 10:02:59 postfix[202]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Sat May 4 10:03:00 UTC 2019
NetBSD/sgimips (Amnesiac) (console)