Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-13 09:28:00
From: tpaul
Description: NetBSD/landisk 8.99.39 I-O DATA HDL-U (HDL-AV250)
[     1.000000]         xxx@xxx.xxx:/usr/src/sys/arch/landisk/compile/GENERIC
[     1.000000] Model: I-O DATA LANDISK
[     1.000000] total memory = 65536 KB
[     1.000000] avail memory = 59696 KB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: SH4 266.666 MHz PCLOCK 33.333 MHz
[     1.000000] cpu0: 8KB/32B direct-mapped Instruction cache.
[     1.000000] cpu0: 16KB/32B direct-mapped Data cache.
[     1.000000] cpu0: U0, P0, P3 write-through; P1 write-through
[     1.000000] cpu0: full-associative 4 ITLB, 64 UTLB entries
[     1.000000] cpu0: multiple virtual storage mode, SQ access: kernel, wired 3
[     1.000000] shpcic0 at mainbus0: vendor 1054 product 350e (host bridge, revision 0x01)
[     1.000000] PCI bus 0: Warning: Total bandwidth exceeded!? (5732712)
[     1.000000] pci0 at shpcic0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] re0 at pci0 dev 0 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
[     1.000000] re0: interrupting at irq 5
[     1.000000] re0: Ethernet address xx:xx:xx:xx:xx:xx
[     1.000000] re0: using 64 tx descriptors
[     1.000000] rlphy0 at re0 phy 0: Realtek internal PHY
[     1.000000] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] acardide0 at pci0 dev 1 function 0: Acard ATP865-A Ultra133 IDE Controller (rev. 0x07)
[     1.000000] acardide0: bus-master DMA support present
[     1.000000] acardide0: primary channel wired to native-PCI mode
[     1.000000] acardide0: using irq 6 for native-PCI interrupt
[     1.000000] atabus0 at acardide0 channel 0
[     1.000000] acardide0: secondary channel wired to native-PCI mode
[     1.000000] atabus1 at acardide0 channel 1
[     1.000000] ohci0 at pci0 dev 2 function 0: vendor 1033 product 0035 (rev. 0x43)
[     1.000000] ohci0: interrupting at irq 7
[     1.000000] ohci0: OHCI version 1.0
[     1.000000] usb0 at ohci0: USB revision 1.0
[     1.000000] ohci1 at pci0 dev 2 function 1: vendor 1033 product 0035 (rev. 0x43)
[     1.000000] ohci1: interrupting at irq 8
[     1.000000] ohci1: OHCI version 1.0
[     1.000000] usb1 at ohci1: USB revision 1.0
[     1.000000] ehci0 at pci0 dev 2 function 2: vendor 1033 product 00e0 (rev. 0x04)
[     1.000000] ehci0: interrupting at irq 5
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[     1.000000] usb2 at ehci0: USB revision 2.0
[     1.000000] shb0 at mainbus0
[     1.000000] scif0 at shb0
[     1.000000] scif0: console
[     1.000000] rs5c313rtc0 at shb0: RICOH 5C313 real time clock
[     1.000000] obio0 at mainbus0
[     1.000000] btn0 at obio0 irq 12: USL-5P buttons
[     1.000000] pwrsw0 at obio0 irq 11: Power Switch
[     1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000009] timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0
[     1.218518] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.306206] uhub0: 3 ports with 3 removable, self powered
[     1.306206] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.410846] uhub1: 2 ports with 2 removable, self powered
[     1.410846] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.515485] uhub2: 5 ports with 5 removable, self powered
[     4.484130] wd0 at atabus0 drive 0
[     4.502821] wd0: <WDC WDS120G2G0A-00JH30>
[     4.561419] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[     4.561419] wd0: 111 GB, 232594 cyl, 16 head, 63 sec, 512 bytes/sect x 234455040 sectors
[     4.658733] wd0: 32-bit data port
[     4.658733] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
[     4.658733] wd0(acardide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[     4.671632] boot device: wd0
[     4.694991] root on wd0a dumps on wd0b
[     4.749763] kern.module.path=/stand/landisk/8.99.39/modules