Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-15 04:09:23
From: yamori813
Description: Nec_WR1200
---<<BOOT>>---
AHB Master Arbitration Control 00000021
Byteswap Control 0000842e
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 896bf9a9272(zrouter)-dirty: Wed May 15 12:50:17 JST 2019
    hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/mips.mips/sys/Nec_WR1200 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory  = 33554432 (32768K bytes)
avail memory = 28053504 (26MB)
__stack_chk_init: WARNING: Initializing stack protection with non-random cookies!
__stack_chk_init: WARNING: This severely limits the benefit of -fstack-protector!
random: entropy device external interface
nexus0: <MIPS32 root nexus>
cpupic0: <MIPS32 Interrupt Controller> on nexus0
apb0: <APB Bus bridge INTRNG> at irq 0 on nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 92000000 Hz quality 800
Event timer "MIPS32" frequency 92000000 Hz quality 800
uart0: <16550 or compatible> on apb0
uart0: console (9600,n,8,1)
gpio0: <Atheros AR531x GPIO driver> on apb0
gpio0: [GIANT-LOCKED]
gpio0: gpio pinmask=0x7fffff
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 7 on gpiobus0
gpioc0: <GPIO controller> on gpio0
ar5315_wdog0: <Atheros AR531x watchdog timer> on apb0
spi0: <AR5315 SPI> at mem 0x11300000-0x1130000b on nexus0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
are0: <AR531x Ethernet interface> at mem 0x10500000-0x109fffff irq 2 on nexus0
are0: Overriding MAC address from environment: 'xx:xx:xx:xx:xx:xx'
are0: Ethernet address: xx:xx:xx:xx:xx:xx
cpupic0: [GIANT-LOCKED]
aremdio0: <Atheros AR531x built-in ethernet interface, MDIO controller> at mem 0x10500000-0x109fffff on nexus0
mdio0: <MDIO> on aremdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
e6060sw0: <Marvell 88E6065 MDIO switch driver at 0x00> on mdio0
miibus0: <MII bus> on e6060sw0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on e6060sw0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus2: <MII bus> on e6060sw0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus3: <MII bus> on e6060sw0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus4: <MII bus> on e6060sw0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
etherswitch0: <Switch controller> on e6060sw0
mdio1: <MDIO> on e6060sw0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
Timecounters tick every 1.000 msec
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
e6060sw0port0: link state changed to DOWN
e6060sw0port1: link state changed to DOWN
e6060sw0port2: link state changed to DOWN
e6060sw0port3: link state changed to DOWN
e6060sw0port4: link state changed to DOWN
Trying to mount root from cd9660:/dev/redboot/rootfs.uzip []...
g_dev_taste: make_dev_p() failed (gp->name=redboot/RedBoot config, error=22)
g_dev_taste: make_dev_p() failed (gp->name=redboot/FIS directory, error=22)
Warning: no time-of-day clock registered, system time will not be set accurately
e6060sw0port2: link state changed to UP
random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME
e6060sw0port0: link state changed to UP
e6060sw0port0: link state changed to DOWN