Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-05-18 22:22:11
From: Gerard
Description: Dell Inspiron 530
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p4 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz (2128.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x6f6  Family=0x6  Model=0xf  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 5637144576 (5376 MB)
avail memory = 4086706176 (3897 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20181003/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20181003/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20181003/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20181003/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20181003/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20181003/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20181003/tbfadt-850)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 2128044128 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL FX09   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xcf00-0xcf7f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xce000000-0xcfffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfcffc000-0xfcffffff irq 17 at device 0.1 on pci1
em0: <Intel(R) PRO/1000 Network Connection> port 0xff00-0xff1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: Unable to map MSIX table 
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0xfe00-0xfe1f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xfd00-0xfd1f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xfc00-0xfc1f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac1: <Intel 82801I HDA Controller> mem 0xfdff4000-0xfdff7fff irq 22 at device 27.0 on pci0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xfb00-0xfb1f irq 23 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0xfa00-0xfa1f irq 19 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0xf900-0xf91f irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <simple comms> at device 0.0 (no driver attached)
pci2: <network> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xf800-0xf807,0xf700-0xf703,0xf600-0xf607,0xf500-0xf503,0xf400-0xf40f,0xf300-0xf30f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel ICH9 SATA300 controller> port 0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f,0xec00-0xec0f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10EZEX-08WN4A0 02.01A02> ACS-3 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GSA-H31N B110> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus7
ugen5.2: <Microsoft Microsoft 2.4GHz Transceiver v7.0> at usbus5
ukbd0 on uhub1
ukbd0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus5
kbd2 at ukbd0
Root mount waiting for: usbus7
ugen7.2: <TEAC CA-200> at usbus7
umass0 on uhub4
umass0: <TEAC CA-200, class 0/0, rev 2.00/4.08, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0xc000
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <TEAC USB   HS-CF Card 4.08> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus4 target 0 lun 1
da1: <TEAC USB   HS-xD/SM 4.08> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus4 target 0 lun 2
da2: <TEAC USB   HS-MS Card 4.08> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus4 target 0 lun 3
da3: <TEAC USB   HS-SD Card 4.08> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
em0: link state changed to UP
bwi0: <Broadcom BCM4318 802.11b/g Wireless Lan> mem 0xfdefe000-0xfdefffff irq 16 at device 1.0 on pci2
bwi0: BBP: id 0x4318, rev 0x2, pkg 0
bwi0: MAC: rev 9
bwi0: PHY: type 2, rev 7, ver 3
bwi0: RF: manu 0x17f, type 0x2050, rev 8
bwi0: invalid antenna gain in sprom
ums0 on uhub1
ums0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus5
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0 on uhub1
uhid0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus5
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled